[U-Boot] [PATCH v3 11/11] mpc85xx: introduce the kmp204x reference design support

Valentin Longchamp valentin.longchamp at keymile.com
Wed Oct 16 08:55:23 CEST 2013


Hi York,

On 10/15/2013 08:24 PM, York Sun wrote:
> Oops. I mistakenlly commented on an older version.

Yes I have noticed, no problem ;o)

> 
> On 09/11/2013 04:17 AM, Valentin Longchamp wrote:
> <snip>
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index bd0f3a0..daa8494 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -785,6 +785,7 @@ Valentin Longchamp <valentin.longchamp at keymile.com>
>>  	mgcoge3un	ARM926EJS (Kirkwood SoC)
>>  	kmcoge5un	ARM926EJS (Kirkwood SoC)
>>  	portl2		ARM926EJS (Kirkwood SoC)
>> +	kmcoge4		MPC85xx (P2041 SoC)
> 
> 
> Do you mean "kmlion1" instead of "kmcoge4" here? See below boards.cfg file.

Yes definitely. There will be a kmcoge4 board later, but in this patch series,
only kmlion1 is supported.

> 
> <snip>
> 
>> diff --git a/boards.cfg b/boards.cfg
>> index be810c7..5fff1ce 100644
>> --- a/boards.cfg
>> +++ b/boards.cfg
>> @@ -752,6 +752,7 @@ tuge1                        powerpc     mpc83xx     km83xx              keymile
>>  tuxx1                        powerpc     mpc83xx     km83xx              keymile        -           tuxx1:TUXX1
>>  kmopti2                      powerpc     mpc83xx     km83xx              keymile        -           tuxx1:KMOPTI2
>>  kmsupx5                      powerpc     mpc83xx     km83xx              keymile        -           tuxx1:KMSUPX5
>> +kmlion1                      powerpc     mpc85xx     kmp204x             keymile        -           kmp204x:KMLION1
>>  sbc8548                      powerpc     mpc85xx     sbc8548             -              -           sbc8548
>>  sbc8548_PCI_33               powerpc     mpc85xx     sbc8548             -              -           sbc8548:PCI,33
>>  sbc8548_PCI_33_PCIE          powerpc     mpc85xx     sbc8548             -              -           sbc8548:PCI,33,PCIE
> 
> No need to resend this patch. I need to fix it for the new boards.cfg
> format anyway. Just need your confirmation.
> 

Here is how we can go: I have minor adjustments to the series. I can rebase it
on top of 2013.10 as soon as it is released (I have already rebased on top of
2013.10-rc4) so that this gets tested on the hardware and send you a V4. I'd be
glad to help. Just tell me what you prefer.

Valentin


More information about the U-Boot mailing list