[U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3

Dan Murphy dmurphy at ti.com
Mon Oct 28 13:51:50 CET 2013


On 10/25/2013 10:42 AM, Hardik wrote:
> From: Hardik Patel <hardik.patel at volansystech.com>
>
>
> Signed-off-by: Hardik Patel <hardik.patel at volansystech.com>
> ---
>  include/configs/omap4_common.h |    7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
> index e9f2383..9aa4030 100644
> --- a/include/configs/omap4_common.h
> +++ b/include/configs/omap4_common.h
> @@ -240,7 +240,12 @@
>  #define CONFIG_SYS_CACHELINE_SIZE	32
>  
>  /* Defines for SDRAM init */
> -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
> +
> +/*
> + * Enable automatic sdram detection
> + * for detecting Elpida RAM on Rev B3
> + */
> +#undef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS

Nak

This is used on all other Panda revisions.

Why are we just disabling this for all devices when one device is the issue?
And as discussed off line I have an older B3 which boots fine on the uBoot mainline.

So what is the difference between your B3 and my B3?  Please answer this to the community or
point to a reference were one can determine what B3 board they have


Dan
>  
>  #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
>  #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION


-- 
------------------
Dan Murphy



More information about the U-Boot mailing list