[U-Boot] [PATCH v2] arm: Remove IXP425 boards pdnb3 and scpu
Albert ARIBAUD
albert.u.boot at aribaud.net
Thu Oct 17 10:09:55 CEST 2013
Hi Stefan,
On Tue, 24 Sep 2013 08:22:19 +0200, Stefan Roese <sr at denx.de> wrote:
> Remove Prodrive pdnb3 board (including the scpu variant) support
> from mainline. As its unmaintained and not needed any more for
> quite some time.
>
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Martijn de Gouw <martijn.de.gouw at prodrive.nl>
> Cc: Albert Aribaud <albert.u.boot at aribaud.net>
> ---
> v2:
> - Rebased on current master
> - Added entries for pdnb3 and scpu to doc/README.scrapyard
>
> board/prodrive/pdnb3/Makefile | 28 ----
> board/prodrive/pdnb3/flash.c | 73 ----------
> board/prodrive/pdnb3/nand.c | 129 -----------------
> board/prodrive/pdnb3/pdnb3.c | 220 -----------------------------
> boards.cfg | 2 -
> doc/README.scrapyard | 2 +
> include/configs/pdnb3.h | 322 ------------------------------------------
> 7 files changed, 2 insertions(+), 774 deletions(-)
> delete mode 100644 board/prodrive/pdnb3/Makefile
> delete mode 100644 board/prodrive/pdnb3/flash.c
> delete mode 100644 board/prodrive/pdnb3/nand.c
> delete mode 100644 board/prodrive/pdnb3/pdnb3.c
> delete mode 100644 include/configs/pdnb3.h
>
> diff --git a/board/prodrive/pdnb3/Makefile b/board/prodrive/pdnb3/Makefile
> deleted file mode 100644
> index 5e4a909..0000000
> --- a/board/prodrive/pdnb3/Makefile
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -#
> -# (C) Copyright 2006
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -
> -include $(TOPDIR)/config.mk
> -
> -LIB = $(obj)lib$(BOARD).o
> -
> -COBJS := flash.o pdnb3.o nand.o
> -
> -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -OBJS := $(addprefix $(obj),$(COBJS))
> -SOBJS := $(addprefix $(obj),$(SOBJS))
> -
> -$(LIB): $(obj).depend $(OBJS)
> - $(call cmd_link_o_target, $(OBJS))
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/prodrive/pdnb3/flash.c b/board/prodrive/pdnb3/flash.c
> deleted file mode 100644
> index 75b5d05..0000000
> --- a/board/prodrive/pdnb3/flash.c
> +++ /dev/null
> @@ -1,73 +0,0 @@
> -/*
> - * (C) Copyright 2006
> - * Stefan Roese, DENX Software Engineering, sr at denx.de.
> - *
> - * SPDX-License-Identifier: GPL-2.0+
> - */
> -
> -#include <common.h>
> -#include <asm/arch/ixp425.h>
> -
> -#if !defined(CONFIG_FLASH_CFI_DRIVER)
> -
> -/*
> - * include common flash code (for esd boards)
> - */
> -#include "../common/flash.c"
> -
> -/*
> - * Prototypes
> - */
> -static ulong flash_get_size (vu_long * addr, flash_info_t * info);
> -
> -static inline ulong ld(ulong x)
> -{
> - ulong k = 0;
> -
> - while (x >>= 1)
> - ++k;
> -
> - return k;
> -}
> -
> -unsigned long flash_init(void)
> -{
> - unsigned long size;
> - int i;
> -
> - /* Init: no FLASHes known */
> - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; i++)
> - flash_info[i].flash_id = FLASH_UNKNOWN;
> -
> - size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
> -
> - if (flash_info[0].flash_id == FLASH_UNKNOWN)
> - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
> - size, size<<20);
> -
> - /* Reconfigure CS0 to actual FLASH size */
> - *IXP425_EXP_CS0 = (*IXP425_EXP_CS0 & ~0x00003C00) | ((ld(size) - 9) << 10);
> -
> - /* Monitor protection ON by default */
> - flash_protect(FLAG_PROTECT_SET,
> - CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
> - &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
> -
> - /* Environment protection ON by default */
> - flash_protect(FLAG_PROTECT_SET,
> - CONFIG_ENV_ADDR,
> - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
> - &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
> -
> - /* Redundant environment protection ON by default */
> - flash_protect(FLAG_PROTECT_SET,
> - CONFIG_ENV_ADDR_REDUND,
> - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
> - &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]);
> -
> - flash_info[0].size = size;
> -
> - return size;
> -}
> -
> -#endif /* CONFIG_FLASH_CFI_DRIVER */
> diff --git a/board/prodrive/pdnb3/nand.c b/board/prodrive/pdnb3/nand.c
> deleted file mode 100644
> index e1d2c63..0000000
> --- a/board/prodrive/pdnb3/nand.c
> +++ /dev/null
> @@ -1,129 +0,0 @@
> -/*
> - * (C) Copyright 2006
> - * Stefan Roese, DENX Software Engineering, sr at denx.de.
> - *
> - * SPDX-License-Identifier: GPL-2.0+
> - */
> -
> -#include <common.h>
> -
> -#if defined(CONFIG_CMD_NAND)
> -
> -#include <nand.h>
> -
> -struct pdnb3_ndfc_regs {
> - uchar cmd;
> - uchar wait;
> - uchar addr;
> - uchar term;
> - uchar data;
> -};
> -
> -static u8 hwctl;
> -static struct pdnb3_ndfc_regs *pdnb3_ndfc;
> -
> -#define readb(addr) *(volatile u_char *)(addr)
> -#define readl(addr) *(volatile u_long *)(addr)
> -#define writeb(d,addr) *(volatile u_char *)(addr) = (d)
> -
> -/*
> - * The PDNB3 has a NAND Flash Controller (NDFC) that handles all accesses to
> - * the NAND devices. The NDFC has command, address and data registers that
> - * when accessed will set up the NAND flash pins appropriately. We'll use the
> - * hwcontrol function to save the configuration in a global variable.
> - * We can then use this information in the read and write functions to
> - * determine which NDFC register to access.
> - *
> - * There is one NAND devices on the board, a Hynix HY27US08561A (32 MByte).
> - */
> -static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
> -{
> - struct nand_chip *this = mtd->priv;
> -
> - if (ctrl & NAND_CTRL_CHANGE) {
> - if ( ctrl & NAND_CLE )
> - hwctl |= 0x1;
> - else
> - hwctl &= ~0x1;
> - if ( ctrl & NAND_ALE )
> - hwctl |= 0x2;
> - else
> - hwctl &= ~0x2;
> - if ( (ctrl & NAND_NCE) != NAND_NCE)
> - writeb(0x00, &(pdnb3_ndfc->term));
> - }
> - if (cmd != NAND_CMD_NONE)
> - writeb(cmd, this->IO_ADDR_W);
> -}
> -
> -
> -static u_char pdnb3_nand_read_byte(struct mtd_info *mtd)
> -{
> - return readb(&(pdnb3_ndfc->data));
> -}
> -
> -static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
> -{
> - int i;
> -
> - for (i = 0; i < len; i++) {
> - if (hwctl & 0x1)
> - writeb(buf[i], &(pdnb3_ndfc->cmd));
> - else if (hwctl & 0x2)
> - writeb(buf[i], &(pdnb3_ndfc->addr));
> - else
> - writeb(buf[i], &(pdnb3_ndfc->data));
> - }
> -}
> -
> -static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
> -{
> - int i;
> -
> - for (i = 0; i < len; i++)
> - buf[i] = readb(&(pdnb3_ndfc->data));
> -}
> -
> -static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
> -{
> - int i;
> -
> - for (i = 0; i < len; i++)
> - if (buf[i] != readb(&(pdnb3_ndfc->data)))
> - return i;
> -
> - return 0;
> -}
> -
> -static int pdnb3_nand_dev_ready(struct mtd_info *mtd)
> -{
> - /*
> - * Blocking read to wait for NAND to be ready
> - */
> - readb(&(pdnb3_ndfc->wait));
> -
> - /*
> - * Return always true
> - */
> - return 1;
> -}
> -
> -int board_nand_init(struct nand_chip *nand)
> -{
> - pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CONFIG_SYS_NAND_BASE;
> -
> - nand->ecc.mode = NAND_ECC_SOFT;
> -
> - /* Set address of NAND IO lines (Using Linear Data Access Region) */
> - nand->IO_ADDR_R = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
> - nand->IO_ADDR_W = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
> - /* Reference hardware control function */
> - nand->cmd_ctrl = pdnb3_nand_hwcontrol;
> - nand->read_byte = pdnb3_nand_read_byte;
> - nand->write_buf = pdnb3_nand_write_buf;
> - nand->read_buf = pdnb3_nand_read_buf;
> - nand->verify_buf = pdnb3_nand_verify_buf;
> - nand->dev_ready = pdnb3_nand_dev_ready;
> - return 0;
> -}
> -#endif
> diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c
> deleted file mode 100644
> index fa320da..0000000
> --- a/board/prodrive/pdnb3/pdnb3.c
> +++ /dev/null
> @@ -1,220 +0,0 @@
> -/*
> - * (C) Copyright 2006
> - * Stefan Roese, DENX Software Engineering, sr at denx.de.
> - *
> - * SPDX-License-Identifier: GPL-2.0+
> - */
> -
> -#include <common.h>
> -#include <command.h>
> -#include <malloc.h>
> -#include <asm/arch/ixp425.h>
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -/* predefine these here for FPGA programming (before including fpga.c) */
> -#define SET_FPGA(data) *IXP425_GPIO_GPOUTR = (data)
> -#define FPGA_DONE_STATE (*IXP425_GPIO_GPINR & CONFIG_SYS_FPGA_DONE)
> -#define FPGA_INIT_STATE (*IXP425_GPIO_GPINR & CONFIG_SYS_FPGA_INIT)
> -#define OLD_VAL old_val
> -
> -static unsigned long old_val = 0;
> -
> -/*
> - * include common fpga code (for prodrive boards)
> - */
> -#include "../common/fpga.c"
> -
> -/*
> - * Miscelaneous platform dependent initialisations
> - */
> -int board_init(void)
> -{
> - /* adress of boot parameters */
> - gd->bd->bi_boot_params = 0x00000100;
> -
> - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_FPGA_RESET);
> - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_FPGA_RESET);
> -
> - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_SYS_RUNNING);
> - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_SYS_RUNNING);
> -
> - /*
> - * Setup GPIO's for FPGA programming
> - */
> - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PRG);
> - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_CLK);
> - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DATA);
> - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PRG);
> - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_CLK);
> - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DATA);
> - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_INIT);
> - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DONE);
> -
> - /*
> - * Setup GPIO's for interrupts
> - */
> - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA);
> - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA);
> - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB);
> - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB);
> - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RESTORE_INT);
> - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RESTORE_INT);
> - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RESTART_INT);
> - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RESTART_INT);
> -
> - /*
> - * Setup GPIO's for 33MHz clock output
> - */
> - *IXP425_GPIO_GPCLKR = 0x01FF0000;
> - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_CLK_33M);
> -
> - /*
> - * Setup other chip select's
> - */
> - *IXP425_EXP_CS1 = CONFIG_SYS_EXP_CS1;
> -
> - return 0;
> -}
> -
> -/*
> - * Check Board Identity
> - */
> -int checkboard(void)
> -{
> - char buf[64];
> - int i = getenv_f("serial#", buf, sizeof(buf));
> -
> - puts("Board: PDNB3");
> -
> - if (i > 0) {
> - puts(", serial# ");
> - puts(buf);
> - }
> - putc('\n');
> -
> - return (0);
> -}
> -
> -int dram_init(void)
> -{
> - gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> -
> - return (0);
> -}
> -
> -int do_fpga_boot(unsigned char *fpgadata)
> -{
> - unsigned char *dst;
> - int status;
> - int index;
> - int i;
> - ulong len = CONFIG_SYS_MALLOC_LEN;
> -
> - /*
> - * Setup GPIO's for FPGA programming
> - */
> - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PRG);
> - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_CLK);
> - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DATA);
> -
> - /*
> - * Save value so no readback is required upon programming
> - */
> - old_val = *IXP425_GPIO_GPOUTR;
> -
> - /*
> - * First try to decompress fpga image (gzip compressed?)
> - */
> - dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
> - if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
> - printf("Error: Image has to be gzipp'ed!\n");
> - return -1;
> - }
> -
> - status = fpga_boot(dst, len);
> - if (status != 0) {
> - printf("\nFPGA: Booting failed ");
> - switch (status) {
> - case ERROR_FPGA_PRG_INIT_LOW:
> - printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
> - break;
> - case ERROR_FPGA_PRG_INIT_HIGH:
> - printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
> - break;
> - case ERROR_FPGA_PRG_DONE:
> - printf("(Timeout: DONE not high after programming FPGA)\n ");
> - break;
> - }
> -
> - /* display infos on fpgaimage */
> - index = 15;
> - for (i=0; i<4; i++) {
> - len = dst[index];
> - printf("FPGA: %s\n", &(dst[index+1]));
> - index += len+3;
> - }
> - putc ('\n');
> - /* delayed reboot */
> - for (i=5; i>0; i--) {
> - printf("Rebooting in %2d seconds \r",i);
> - for (index=0;index<1000;index++)
> - udelay(1000);
> - }
> - putc('\n');
> - do_reset(NULL, 0, 0, NULL);
> - }
> -
> - puts("FPGA: ");
> -
> - /* display infos on fpgaimage */
> - index = 15;
> - for (i=0; i<4; i++) {
> - len = dst[index];
> - printf("%s ", &(dst[index+1]));
> - index += len+3;
> - }
> - putc('\n');
> -
> - free(dst);
> -
> - /*
> - * Reset FPGA
> - */
> - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_FPGA_RESET);
> - udelay(10);
> - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_FPGA_RESET);
> -
> - return (0);
> -}
> -
> -int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> -{
> - ulong addr;
> -
> - if (argc < 2)
> - return cmd_usage(cmdtp);
> -
> - addr = simple_strtoul(argv[1], NULL, 16);
> -
> - return do_fpga_boot((unsigned char *)addr);
> -}
> -
> -U_BOOT_CMD(
> - fpga, 2, 0, do_fpga,
> - "boot FPGA",
> - "address size\n - boot FPGA with gzipped image at <address>"
> -);
> -
> -#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
> -extern struct pci_controller hose;
> -extern void pci_ixp_init(struct pci_controller * hose);
> -
> -void pci_init_board(void)
> -{
> - extern void pci_ixp_init (struct pci_controller *hose);
> -
> - pci_ixp_init(&hose);
> -}
> -#endif
> diff --git a/boards.cfg b/boards.cfg
> index 9fc77fb..cc58de4 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -362,8 +362,6 @@ Active arm ixp - - actux1
> Active arm ixp - - actux1 actux1_4_32 actux1:FLASH2X2,RAM_32MB Michael Schwingen <michael at schwingen.org>
> Active arm ixp - - actux1 actux1_8_16 actux1:FLASH1X8 Michael Schwingen <michael at schwingen.org>
> Active arm ixp - - actux1 actux1_8_32 actux1:FLASH1X8,RAM_32MB Michael Schwingen <michael at schwingen.org>
> -Active arm ixp - prodrive pdnb3 pdnb3 - Stefan Roese <sr at denx.de>
> -Active arm ixp - prodrive pdnb3 scpu pdnb3:SCPU Stefan Roese <sr at denx.de>
> Active arm pxa - - - balloon3 - Marek Vasut <marek.vasut at gmail.com>
> Active arm pxa - - - h2200 - Lukasz Dalek <luk0104 at gmail.com>
> Active arm pxa - - - palmld - Marek Vasut <marek.vasut at gmail.com>
> diff --git a/doc/README.scrapyard b/doc/README.scrapyard
> index 87b1dfe..1f38611 100644
> --- a/doc/README.scrapyard
> +++ b/doc/README.scrapyard
> @@ -11,6 +11,8 @@ easily if here is something they might want to dig for...
>
> Board Arch CPU Commit Removed Last known maintainer/contact
> =================================================================================================
> +pdnb3 arm ixp - 2013-09-24 Stefan Roese <sr at denx.de>
> +scpu arm ixp - 2013-09-24 Stefan Roese <sr at denx.de>
> CANBT powerpc 405CR - - Matthias Fuchs <matthias.fuchs at esd.eu>
> Alaska8220 powerpc mpc8220 d6ed322 2013-05-11
> Yukon8220 powerpc mpc8220 d6ed322 2013-05-11
> diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
> deleted file mode 100644
> index c664010..0000000
> --- a/include/configs/pdnb3.h
> +++ /dev/null
> @@ -1,322 +0,0 @@
> -/*
> - * (C) Copyright 2006-2007
> - * Stefan Roese, DENX Software Engineering, sr at denx.de.
> - *
> - * Configuation settings for the PDNB3 board.
> - *
> - * SPDX-License-Identifier: GPL-2.0+
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*
> - * High Level Configuration Options
> - * (easy to change)
> - */
> -#define CONFIG_IXP425 1 /* This is an IXP425 CPU */
> -#define CONFIG_PDNB3 1 /* on an PDNB3 board */
> -
> -#define CONFIG_MACH_TYPE 1002
> -
> -#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
> -#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
> -
> -/*
> - * Ethernet
> - */
> -#define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */
> -#define CONFIG_PHY_ADDR 16 /* NPE0 PHY address */
> -#define CONFIG_HAS_ETH1
> -#define CONFIG_PHY1_ADDR 18 /* NPE1 PHY address */
> -#define CONFIG_MII 1 /* MII PHY management */
> -#define CONFIG_SYS_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
> -
> -/*
> - * Misc configuration options
> - */
> -#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */
> -#define CONFIG_SYS_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */
> -
> -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
> -#define CONFIG_SETUP_MEMORY_TAGS 1
> -#define CONFIG_INITRD_TAG 1
> -
> -/*
> - * Size of malloc() pool
> - */
> -#define CONFIG_SYS_MALLOC_LEN (1 << 20)
> -
> -/* allow to overwrite serial and ethaddr */
> -#define CONFIG_ENV_OVERWRITE
> -
> -#define CONFIG_IXP_SERIAL
> -#define CONFIG_BAUDRATE 115200
> -#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
> -
> -
> -/*
> - * BOOTP options
> - */
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#define CONFIG_BOOTP_BOOTPATH
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_HOSTNAME
> -
> -
> -/*
> - * Command line configuration.
> - */
> -#include <config_cmd_default.h>
> -
> -#define CONFIG_CMD_DHCP
> -#define CONFIG_CMD_DATE
> -#define CONFIG_CMD_NET
> -#define CONFIG_CMD_MII
> -#define CONFIG_CMD_I2C
> -#define CONFIG_CMD_ELF
> -#define CONFIG_CMD_PING
> -
> -#if !defined(CONFIG_SCPU)
> -#define CONFIG_CMD_NAND
> -#endif
> -
> -
> -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
> -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
> -
> -/*
> - * Miscellaneous configurable options
> - */
> -#define CONFIG_SYS_LONGHELP /* undef to save memory */
> -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
> -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
> -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
> -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
> -
> -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
> -#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
> -#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
> -
> -#define CONFIG_IXP425_TIMER_CLK 66666666
> -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
> -
> -/***************************************************************
> - * Platform/Board specific defines start here.
> - ***************************************************************/
> -
> -/*-----------------------------------------------------------------------
> - * Default configuration (environment varibles...)
> - *----------------------------------------------------------------------*/
> -#define CONFIG_PREBOOT "echo;" \
> - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
> - "echo"
> -
> -#undef CONFIG_BOOTARGS
> -
> -#define CONFIG_EXTRA_ENV_SETTINGS \
> - "netdev=eth0\0" \
> - "hostname=pdnb3\0" \
> - "nfsargs=setenv bootargs root=/dev/nfs rw " \
> - "nfsroot=${serverip}:${rootpath}\0" \
> - "ramargs=setenv bootargs root=/dev/ram rw\0" \
> - "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
> - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
> - ":${hostname}:${netdev}:off panic=1\0" \
> - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate} " \
> - "mtdparts=${mtdparts}\0" \
> - "flash_nfs=run nfsargs addip addtty;" \
> - "bootm ${kernel_addr}\0" \
> - "flash_self=run ramargs addip addtty;" \
> - "bootm ${kernel_addr} ${ramdisk_addr}\0" \
> - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
> - "bootm\0" \
> - "rootpath=/opt/buildroot\0" \
> - "bootfile=/tftpboot/netbox/uImage\0" \
> - "kernel_addr=50080000\0" \
> - "ramdisk_addr=50200000\0" \
> - "load=tftp 100000 /tftpboot/netbox/u-boot.bin\0" \
> - "update=protect off 50000000 5007dfff;era 50000000 5007dfff;" \
> - "cp.b 100000 50000000 ${filesize};" \
> - "setenv filesize;saveenv\0" \
> - "upd=run load update\0" \
> - "ipaddr=10.0.0.233\0" \
> - "serverip=10.0.0.152\0" \
> - "netmask=255.255.0.0\0" \
> - "ethaddr=c6:6f:13:36:f3:81\0" \
> - "eth1addr=c6:6f:13:36:f3:82\0" \
> - "mtdparts=IXP4XX-Flash.0:504k at 0(uboot),4k at 504k(env)," \
> - "4k at 508k(renv)\0" \
> - ""
> -#define CONFIG_BOOTCOMMAND "run net_nfs"
> -
> -/*
> - * Physical Memory Map
> - */
> -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
> -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
> -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
> -
> -#define CONFIG_SYS_TEXT_BASE 0x50000000
> -#define CONFIG_SYS_FLASH_BASE 0x50000000
> -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
> -#if defined(CONFIG_SCPU)
> -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 512 kB for Monitor */
> -#else
> -#define CONFIG_SYS_MONITOR_LEN (504 << 10) /* Reserve 512 kB for Monitor */
> -#endif
> -
> -/*
> - * Expansion bus settings
> - */
> -#if defined(CONFIG_SCPU)
> -#define CONFIG_SYS_EXP_CS0 0x94d23C42 /* 8bit, max size */
> -#else
> -#define CONFIG_SYS_EXP_CS0 0x94913C43 /* 8bit, max size */
> -#endif
> -#define CONFIG_SYS_EXP_CS1 0x85000043 /* 8bit, 512bytes */
> -
> -/*
> - * SDRAM settings
> - */
> -#define CONFIG_SYS_SDR_CONFIG 0x18
> -#define CONFIG_SYS_SDR_MODE_CONFIG 0x1
> -#define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
> -
> -/*
> - * FLASH and environment organization
> - */
> -#if defined(CONFIG_SCPU)
> -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
> -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
> -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */
> -#endif
> -
> -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
> -
> -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
> -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
> -
> -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
> -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
> -
> -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size (width) */
> -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
> -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
> -/*
> - * The following defines are added for buggy IOP480 byte interface.
> - * All other boards should use the standard values (CPCI405 etc.)
> - */
> -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
> -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
> -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
> -
> -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
> -
> -#define CONFIG_ENV_IS_IN_FLASH 1
> -
> -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
> -#if defined(CONFIG_SCPU)
> -/* no redundant environment on SCPU */
> -#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
> -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
> -#else
> -#define CONFIG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */
> -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
> -
> -/* Address and size of Redundant Environment Sector */
> -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
> -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
> -#endif
> -
> -#if !defined(CONFIG_SCPU)
> -/*
> - * NAND-FLASH stuff
> - */
> -#define CONFIG_SYS_MAX_NAND_DEVICE 1
> -#define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */
> -#endif
> -
> -/*
> - * GPIO settings
> - */
> -
> -/* FPGA program pin configuration */
> -#define CONFIG_SYS_GPIO_PRG 12 /* FPGA program pin (cpu output)*/
> -#define CONFIG_SYS_GPIO_CLK 10 /* FPGA clk pin (cpu output) */
> -#define CONFIG_SYS_GPIO_DATA 14 /* FPGA data pin (cpu output) */
> -#define CONFIG_SYS_GPIO_INIT 13 /* FPGA init pin (cpu input) */
> -#define CONFIG_SYS_GPIO_DONE 11 /* FPGA done pin (cpu input) */
> -
> -/* other GPIO's */
> -#define CONFIG_SYS_GPIO_RESTORE_INT 0
> -#define CONFIG_SYS_GPIO_RESTART_INT 1
> -#define CONFIG_SYS_GPIO_SYS_RUNNING 2
> -#define CONFIG_SYS_GPIO_PCI_INTA 3
> -#define CONFIG_SYS_GPIO_PCI_INTB 4
> -#define CONFIG_SYS_GPIO_I2C_SCL 6
> -#define CONFIG_SYS_GPIO_I2C_SDA 7
> -#define CONFIG_SYS_GPIO_FPGA_RESET 9
> -#define CONFIG_SYS_GPIO_CLK_33M 15
> -
> -/*
> - * I2C stuff
> - */
> -
> -/* enable I2C and select the hardware/software driver */
> -#define CONFIG_SYS_I2C
> -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
> -#define CONFIG_SYS_I2C_SOFT_SPEED 83000 /* 83 kHz is supposed to work */
> -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
> -/*
> - * Software (bit-bang) I2C driver configuration
> - */
> -#define PB_SCL (1 << CONFIG_SYS_GPIO_I2C_SCL)
> -#define PB_SDA (1 << CONFIG_SYS_GPIO_I2C_SDA)
> -
> -#define I2C_INIT GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SCL)
> -#define I2C_ACTIVE GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SDA)
> -#define I2C_TRISTATE GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_I2C_SDA)
> -#define I2C_READ ((*IXP425_GPIO_GPINR & PB_SDA) != 0)
> -#define I2C_SDA(bit) if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SDA); \
> - else GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA)
> -#define I2C_SCL(bit) if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SCL); \
> - else GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SCL)
> -#define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */
> -
> -/*
> - * I2C RTC
> - */
> -#if 0 /* test-only */
> -#define CONFIG_RTC_DS1340 1
> -#define CONFIG_SYS_I2C_RTC_ADDR 0x68
> -#else
> -/* M41T11 Serial Access Timekeeper(R) SRAM */
> -#define CONFIG_RTC_M41T11 1
> -#define CONFIG_SYS_I2C_RTC_ADDR 0x68
> -#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with the linux driver */
> -#endif
> -
> -/*
> - * Spartan3 FPGA configuration support
> - */
> -#define CONFIG_SYS_FPGA_MAX_SIZE 700*1024 /* 700kByte for XC3S500E */
> -
> -#define CONFIG_SYS_FPGA_PRG (1 << CONFIG_SYS_GPIO_PRG) /* FPGA program pin (cpu output)*/
> -#define CONFIG_SYS_FPGA_CLK (1 << CONFIG_SYS_GPIO_CLK) /* FPGA clk pin (cpu output) */
> -#define CONFIG_SYS_FPGA_DATA (1 << CONFIG_SYS_GPIO_DATA) /* FPGA data pin (cpu output) */
> -#define CONFIG_SYS_FPGA_INIT (1 << CONFIG_SYS_GPIO_INIT) /* FPGA init pin (cpu input) */
> -#define CONFIG_SYS_FPGA_DONE (1 << CONFIG_SYS_GPIO_DONE) /* FPGA done pin (cpu input) */
> -
> -/*
> - * Cache Configuration
> - */
> -#define CONFIG_SYS_CACHELINE_SIZE 32
> -
> -/* additions for new relocation code, must be added to all boards */
> -#define CONFIG_SYS_SDRAM_BASE 0x00000000
> -#define CONFIG_SYS_INIT_SP_ADDR \
> - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
> -
> -#endif /* __CONFIG_H */
Applied to u-boot-arm/master with a trivial am resolution and an
on-the-fly update to omap1510inn in doc/README.scrapyard, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list