[U-Boot] [PATCH v2 1/3] arm/km: add support for km_kirkwood_128m16 board

Albert ARIBAUD albert.u.boot at aribaud.net
Wed Oct 2 22:31:35 CEST 2013


Hi Holger,

On Wed, 18 Sep 2013 09:32:48 +0200, Holger Brunck
<holger.brunck at keymile.com> wrote:

> From: Karlheinz Jerg <karlheinz.jerg at keymile.com>
> 
> The board is similar to the standard km_kirkwood board. From a
> u-boot point of view, the only difference is an increased
> 256 MiB DRAM (128M16). A board based on this design is for
> example the SUP12.
> 
> Signed-off-by: Karlheinz Jerg <karlheinz.jerg at keymile.com>
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> ---
>  boards.cfg                    |  1 +
>  include/configs/km_kirkwood.h | 10 ++++++++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/boards.cfg b/boards.cfg
> index dbd8479..f48c5bb 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -167,6 +167,7 @@ Active  arm         arm926ejs      kirkwood    iomega          -
>  Active  arm         arm926ejs      kirkwood    karo            tk71                tk71                                 -                                                                                                                                 -
>  Active  arm         arm926ejs      kirkwood    keymile         km_arm              km_kirkwood                          km_kirkwood:KM_KIRKWOOD                                                                                                           Valentin Longchamp <valentin.longchamp at keymile.com>
>  Active  arm         arm926ejs      kirkwood    keymile         km_arm              km_kirkwood_pci                      km_kirkwood:KM_KIRKWOOD_PCI                                                                                                       Valentin Longchamp <valentin.longchamp at keymile.com>
> +Active  arm         arm926ejs      kirkwood    keymile         km_arm              km_kirkwood_128m16                   km_kirkwood:KM_KIRKWOOD_128M16                                                                                                    Valentin Longchamp <valentin.longchamp at keymile.com>
>  Active  arm         arm926ejs      kirkwood    keymile         km_arm              kmcoge5un                            km_kirkwood:KM_COGE5UN                                                                                                            Valentin Longchamp <valentin.longchamp at keymile.com>
>  Active  arm         arm926ejs      kirkwood    keymile         km_arm              kmnusa                               km_kirkwood:KM_NUSA                                                                                                               Valentin Longchamp <valentin.longchamp at keymile.com>
>  Active  arm         arm926ejs      kirkwood    keymile         km_arm              kmsuv31                              km_kirkwood:KM_SUV31                                                                                                              Valentin Longchamp <valentin.longchamp at keymile.com>
> diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
> index 0e6073c..b8b64c4 100644
> --- a/include/configs/km_kirkwood.h
> +++ b/include/configs/km_kirkwood.h
> @@ -35,6 +35,16 @@
>  #define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
>  #define CONFIG_KM_FPGA_CONFIG
>  
> +/* KM_KIRKWOOD_128M16 */
> +#elif defined(CONFIG_KM_KIRKWOOD_128M16)
> +#define CONFIG_IDENT_STRING		"\nKeymile Kirkwood 128M16"
> +#define CONFIG_HOSTNAME			km_kirkwood_128m16
> +#undef CONFIG_SYS_KWD_CONFIG
> +#define CONFIG_SYS_KWD_CONFIG \
> +		$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
> +#define CONFIG_KM_DISABLE_PCIE
> +#define KM_IVM_BUS			"pca9544a:70:9"	/* I2C2 (Mux-Port 1)*/
> +
>  /* KM_NUSA */
>  #elif defined(CONFIG_KM_NUSA)
>  #define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/

This was assigned to me on patchwork; should go to Prafulla actually,
as V1 did.

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list