[U-Boot] [PATCH 1/2 V3] esdhc: memset mmc struct before putting into use

[Pantelis Antoniou]

Hi Haijun,

On Oct 31, 2013, at 3:38 AM, Haijun Zhang wrote:

> struct mmc should be clear to all '0' after malloc to avoid
> unexpect variable value.
> 
> Like mmc->has_init = xxx.
> In this case mmcinfo will believe the card had been initialized before
> and skip the initialization.
> 
> Test on P5040 and T4240,
> Error Log:
> 
> => mmcinfo
> Device: FSL_SDHC
> Manufacturer ID: 0
> OEM: 0
> Name: Tran Speed: 0
> Rd Block Len: 0
> MMC version 0.0
> High Capacity: No
> Capacity: 0 Bytes
> Bus Width: 0-bit
> =>
> 
> Signed-off-by: Haijun Zhang <Haijun.Zhang at freescale.com>
> Signed-off-by: Xie Shaohui-B21989 <B21989 at freescale.com>
> Tested-by: Ryan Barnett <rjbarnet at rockwellcollins.com>
> ---
> changes for V3:
> 	- Only add Tested-by no other changes
> changes for V2:
> 	- No changes
> 
> drivers/mmc/fsl_esdhc.c | 1 +
> 1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index a7170b4..d4c1eef 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -521,6 +521,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
> 	if (!mmc)
> 		return -ENOMEM;
> 
> +	memset(mmc, 0, sizeof(struct mmc));
> 	sprintf(mmc->name, "FSL_SDHC");
> 	regs = (struct fsl_esdhc *)cfg->esdhc_base;
> 
> -- 
> 1.8.4
> 
> 

Applied, thanks.

Acked-by: Pantelis Antoniou <panto at antoniou-consulting.com>