[U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot

[Stefano Babic]

On 28/10/2013 12:29, Marek Vasut wrote:
> In case the board detected sufficient voltage for battery boot,
> make sure the DCDC converter is ON and the board is not running
> only from linregs, otherwise an instability will be observed.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <fabio.estevam at freescale.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================