[U-Boot] v2013.10 failed build with jffs2 cmd

[Chris Ruehl]

Dear List,

when I tried to build v2013.10 with the Option: CONFIG_CMD_JFFS2
using linao tool-chain 2013.09 (and earlier) I run into the well known problem

  uses VFP register arguments, u-boot does not

the u-boot.map shows this as source of the trouble -

/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_aeabi_uldivmod.o)
                               fs/jffs2/libjffs2.o (__aeabi_uldivmod)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_dvmd_lnx.o)
 
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_udivsi3.o) 
(__aeabi_idiv0)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(bpabi.o)
 
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_aeabi_uldivmod.o) 
(__gnu_uldivmod_helper)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_divdi3.o)
 
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(bpabi.o) 
(__divdi3)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_udivdi3.o)
 
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(bpabi.o) 
(__udivdi3)


any hints to solve this?


Chris