[U-Boot] [PATCH 2/2] T1040QDS: Add support of 2 stage SD bootloader
Priyanka Jain
Priyanka.Jain at freescale.com
Thu Oct 31 10:45:33 CET 2013
Add support of 2-stage T1040QDS SD bootloader using SPL framework.
In this, PBL (hardware) initializes SRAM (256K) and copy SPL
(192K) from SD card to SRAM and transfer control to SPL.
This SPL bootloader furthur initializes DDR using SPD and
environment and copy final u-boot image (512K) from SD card
to DDR and transfer control to final u-boot.
Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
---
Based on u-boot-mpc85xx/next branch.
This patch depends upon following patches:
1)[U-Boot,2/2] T1040QDS: Add support of 2 stage SPI bootloader
http://patchwork.ozlabs.org/patch/287139/
board/freescale/t1040qds/README | 8 ++++++++
board/freescale/t1040qds/spl.c | 5 +++++
boards.cfg | 1 +
include/configs/T1040QDS.h | 23 ++++++++++++++++++-----
4 files changed, 32 insertions(+), 5 deletions(-)
diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README
index 6235246..d4167c6 100644
--- a/board/freescale/t1040qds/README
+++ b/board/freescale/t1040qds/README
@@ -209,3 +209,11 @@ Command to build 2 stage SPI boot loader
+66000002 00000000 58027000 01000000
- make T1040QDS_SPIFLASH_config
- make u-boot-with-spl-pbl.bin
+
+Command to build 2 stage SD card boot loader
+-------------------------------------------
+ - modify RCW at board/freescale/t1040qds/t1040_rcw.cfg for spi boot
+ -66000002 00000000 fc027000 01000000
+ +66000002 00000000 68027000 01000000
+ - make T1040QDS_SDCARD_config
+ - make u-boot-with-spl-pbl.bin
diff --git a/board/freescale/t1040qds/spl.c b/board/freescale/t1040qds/spl.c
index 60770f0..35d7651 100644
--- a/board/freescale/t1040qds/spl.c
+++ b/board/freescale/t1040qds/spl.c
@@ -107,6 +107,9 @@ void board_init_r(gd_t *gd, ulong dest_addr)
mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
CONFIG_SPL_RELOC_MALLOC_SIZE);
env_init();
+#ifdef CONFIG_SPL_MMC_BOOT
+ mmc_initialize(bd);
+#endif
/* relocate environment function pointers etc. */
env_relocate();
@@ -120,5 +123,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
nand_boot();
#elif defined(CONFIG_SPL_SPI_BOOT)
spi_boot();
+#elif defined(CONFIG_SPL_MMC_BOOT)
+ mmc_boot();
#endif
}
diff --git a/boards.cfg b/boards.cfg
index 56f522e..e9a43a1 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -965,6 +965,7 @@ Active powerpc mpc85xx - freescale t4qds
Active powerpc mpc85xx - freescale t1040qds T1040QDS T1040QDS:PPC_T1040 Naveen Burmi <NaveenBurmi at freescale.com>
Active powerpc mpc85xx - freescale t1040qds T1040QDS_NAND T1040QDS:PPC_T1040,RAMBOOT_PBL,NAND Poonam Aggrwal <poonam.aggrwal at freescale.com>
Active powerpc mpc85xx - freescale t1040qds T1040QDS_SPIFLASH T1040QDS:PPC_T1040,RAMBOOT_PBL,SPIFLASH Poonam Aggrwal <poonam.aggrwal at freescale.com>
+Active powerpc mpc85xx - freescale t1040qds T1040QDS_SDCARD T1040QDS:PPC_T1040,RAMBOOT_PBL,SDCARD Poonam Aggrwal <poonam.aggrwal at freescale.com>
Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD controlcenterd:36BIT,SDCARD Dirk Eibach <eibach at gdsys.de>
Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD_DEVELOP controlcenterd:36BIT,SDCARD,DEVELOP Dirk Eibach <eibach at gdsys.de>
Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER controlcenterd:TRAILBLAZER,SPIFLASH Dirk Eibach <eibach at gdsys.de>
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 27b812d..7bb8227 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -70,6 +70,17 @@
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
#define CONFIG_SPL_SPI_BOOT
#endif
+#ifdef CONFIG_SDCARD
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_DST (0x280000)
+#define CONFIG_SYS_MMC_U_BOOT_START (0x2ff000)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS (512 << 10)
+#define CONFIG_SYS_TEXT_BASE 0x280000
+#define CONFIG_RESET_VECTOR_ADDRESS 0x2ffffc
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#define CONFIG_SPL_MMC_BOOT
+#endif
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_COMMON_INIT_DDR
#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
@@ -138,7 +149,7 @@
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_OFFSET (512 * 1105)
+#define CONFIG_ENV_OFFSET 0x100000 /*1MB*/
#elif defined(CONFIG_NAND)
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_ENV_IS_IN_NAND
@@ -640,12 +651,14 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_SDCARD)
/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 545KB (1089 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
+ * For 2 stage bootloader, SD card will contain
+ * PBL SD boot image for SPL at offset 0x0
+ * final u-boot image at offset 0x400 of size 0x400
+ * env at offset 0x100000 of size 0x2000
+ * FMAN microcode can be stored at 0x110000
*/
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
-#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130)
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000
#elif defined(CONFIG_NAND)
#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_QE_FMAN_FW_ADDR (9 * CONFIG_SYS_NAND_BLOCK_SIZE)
--
1.7.4.1
More information about the U-Boot
mailing list