[U-Boot] [PATCH 3/3] cm_t35: use scf0403 driver
Nikita Kiryanov
nikita at compulab.co.il
Wed Oct 9 16:46:05 CEST 2013
Use scf0403 driver to add scf0403x LCD support for cm-t35 and cm-t3730
boards.
Cc: Tom Rini <trini at ti.com>
Cc: Anatolij Gustschin <agust at denx.de>
Cc: Igor Grinberg <grinberg at compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>
---
NOTE: This patch depends on http://patchwork.ozlabs.org/patch/275283/
arch/arm/include/asm/arch-omap3/dss.h | 9 ++++---
board/compulab/cm_t35/cm_t35.c | 12 +++++++++
board/compulab/common/omap3_display.c | 46 +++++++++++++++++++++++++++++++++--
include/configs/cm_t35.h | 3 +++
4 files changed, 64 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h
index ae0babf..8bf6b48 100644
--- a/arch/arm/include/asm/arch-omap3/dss.h
+++ b/arch/arm/include/asm/arch-omap3/dss.h
@@ -178,10 +178,11 @@ struct venc_regs {
#define LCD_INTERFACE_24_BIT 3
/* Polarity */
-#define DSS_IVS (1 << 12)
-#define DSS_IHS (1 << 13)
-#define DSS_IPC (1 << 14)
-#define DSS_IEO (1 << 15)
+#define DSS_IVS (1 << 12)
+#define DSS_IHS (1 << 13)
+#define DSS_IPC (1 << 14)
+#define DSS_IEO (1 << 15)
+#define DSS_ONOFF (1 << 17)
/* GFX format */
#define GFXFORMAT_BITMAP1 (0x0 << 1)
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index a6d4aba..51dd4a4 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -268,6 +268,9 @@ static void cm_t3x_set_common_muxconf(void)
/* DVI enable */
MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPMC_nCS3*/
+ /* DataImage backlight */
+ MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | DIS | M4));/*GPIO_58*/
+
/* CM-T3x Ethernet */
MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/
MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/
@@ -374,6 +377,15 @@ static void cm_t3x_set_common_muxconf(void)
MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); /*MMC1_DAT1*/
MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); /*MMC1_DAT2*/
MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); /*MMC1_DAT3*/
+
+ /* SPI */
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/
+ MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTU | EN | M1)); /*MCSPI4_CS0*/
+
+ /* display controls */
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)); /*GPIO_157*/
}
static void cm_t35_set_muxconf(void)
diff --git a/board/compulab/common/omap3_display.c b/board/compulab/common/omap3_display.c
index ead821e..61707f5 100644
--- a/board/compulab/common/omap3_display.c
+++ b/board/compulab/common/omap3_display.c
@@ -14,6 +14,7 @@
#include <stdio_dev.h>
#include <asm/arch/dss.h>
#include <lcd.h>
+#include <scf0403_lcd.h>
#include <asm/arch-omap3/dss.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -22,6 +23,7 @@ enum display_type {
NONE,
DVI,
DVI_CUSTOM,
+ DATA_IMAGE, /* #define CONFIG_SCF0403_LCD to use */
};
#define CMAP_ADDR 0x80100000
@@ -119,6 +121,18 @@ static const struct panel_config preset_dvi_1280X1024 = {
.gfx_format = GFXFORMAT_RGB16,
};
+static const struct panel_config preset_dataimage_480X800 = {
+ .lcd_size = PANEL_LCD_SIZE(480, 800),
+ .timing_h = DSS_HBP(2) | DSS_HFP(2) | DSS_HSW(2),
+ .timing_v = DSS_VBP(17) | DSS_VFP(20) | DSS_VSW(3),
+ .pol_freq = DSS_IVS | DSS_IHS | DSS_IPC | DSS_ONOFF,
+ .divisor = 10 | (1 << 10),
+ .data_lines = LCD_INTERFACE_18_BIT,
+ .panel_type = ACTIVE_DISPLAY,
+ .load_mode = 2,
+ .gfx_format = GFXFORMAT_RGB16,
+};
+
/*
* set_resolution_params()
*
@@ -146,6 +160,13 @@ static enum display_type set_dvi_preset(const struct panel_config preset,
return DVI;
}
+static enum display_type set_dataimage_preset(const struct panel_config preset,
+ int x_res, int y_res)
+{
+ set_preset(preset, x_res, y_res);
+ return DATA_IMAGE;
+}
+
/*
* parse_mode() - parse the mode parameter of custom lcd settings
*
@@ -369,6 +390,8 @@ static enum display_type env_parse_displaytype(char *displaytype)
return set_dvi_preset(preset_dvi_1280X960, 1280, 960);
else if (!strncmp(displaytype, "dvi1280x1024", 12))
return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024);
+ else if (!strncmp(displaytype, "dataimage480x800", 16))
+ return set_dataimage_preset(preset_dataimage_480X800, 480, 800);
return NONE;
}
@@ -401,12 +424,31 @@ void lcd_ctrl_init(void *lcdbase)
clrsetbits_le32(&prcm->clksel_dss, 0xF, 3);
}
+#ifdef CONFIG_SCF0403_LCD
+static void scf0403_enable(void)
+{
+ gpio_direction_output(58, 1);
+ scf0403_init(157);
+}
+#else
+static inline void scf0403_enable(void) {}
+#endif
+
void lcd_enable(void)
{
- if (lcd_def == DVI || lcd_def == DVI_CUSTOM) {
+ switch (lcd_def) {
+ case NONE:
+ return;
+ case DVI:
+ case DVI_CUSTOM:
gpio_direction_output(54, 0); /* Turn on DVI */
- omap3_dss_enable();
+ break;
+ case DATA_IMAGE:
+ scf0403_enable();
+ break;
}
+
+ omap3_dss_enable();
}
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {}
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 1260367..0a5e81f 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -327,5 +327,8 @@
#define CONFIG_SPLASH_SCREEN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
+#define CONFIG_SCF0403_LCD
+
+#define CONFIG_OMAP3_SPI
#endif /* __CONFIG_H */
--
1.8.1.2
More information about the U-Boot
mailing list