[U-Boot] problems porting to 2013.x
Fabio Estevam
festevam at gmail.com
Thu Oct 10 06:49:37 CEST 2013
Hi Chris,
On Wed, Oct 9, 2013 at 2:34 AM, Chris Ruehl <chris.ruehl at gtsys.com.hk> wrote:
> Hi.
>
> I hope someone can open my eyes on this. We try to port our MX27 board to
> the new u-boot loader using the SPL code rather then the self hacked
> NAND->SDRAM.
>
> I'm not able to get anything run. The console stays dead.
I would suggest you to look to an existing mx27 supported in mainline,
like Armadeus' ap27 for example:
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=bcc05c7aeb5507125b463fca3c98679d9c483919;hp=a8f2d0e6757c8f5391113582d8fecad29dc8cedc
Regards,
Fabio Estevam
More information about the U-Boot
mailing list