[U-Boot] [PATCH v2 01/10] arm: vf610: fix anadig register struct

[Albert ARIBAUD]

Hi Marcel,

On Mon, 30 Sep 2013 13:26:06 +0200, Marcel Ziswiler
<marcel at ziswiler.com> wrote:

> The anadig_reg structure started at the wrong offset (fixed by adding
> resvA[4]), was missing some reserved field required for alignment
> purpose (resvB[3] between pll4_denom and pll6_ctrl) and further
> contained too short a reserved field causing further miss-alignment
> (resv10[7]).
> 
> Discovered and tested by temporarily putting the following debug
> instrumentation into board_init():
>     struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
>     printf("&anadig->pll3_ctrl=0x%p\n", &anadig->pll3_ctrl);
>     printf("&anadig->pll5_ctrl=0x%p\n", &anadig->pll5_ctrl);
> 
> Signed-off-by: Marcel Ziswiler <marcel at ziswiler.com>
> ---
>  arch/arm/include/asm/arch-vf610/crm_regs.h |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
> index 85f1fda..57a0242 100644
> --- a/arch/arm/include/asm/arch-vf610/crm_regs.h
> +++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
> @@ -55,6 +55,7 @@ struct ccm_reg {
>  
>  /* Analog components control digital interface (ANADIG) */
>  struct anadig_reg {
> +	u32 resvA[4];

Can you name reserved fields based on their byte or register
index offset?
 
>  	u32 pll3_ctrl;
>  	u32 resv0[3];
>  	u32 pll7_ctrl;
> @@ -72,12 +73,13 @@ struct anadig_reg {
>  	u32 pll4_num;
>  	u32 resv7[3];
>  	u32 pll4_denom;
> +	u32 resvB[3];
>  	u32 pll6_ctrl;
>  	u32 resv8[3];
>  	u32 pll6_num;
>  	u32 resv9[3];
>  	u32 pll6_denom;
> -	u32 resv10[3];
> +	u32 resv10[7];
>  	u32 pll5_ctrl;
>  	u32 resv11[3];
>  	u32 pll3_pfd;


Amicalement,
-- 
Albert.