[U-Boot] powerpc/mpc85xx: Increase image size

[Scott Wood]

On Wed, 2013-10-16 at 10:41 -0700, York Sun wrote:
> On 10/11/2013 11:56 AM, York Sun wrote:
> > On 10/11/2013 11:39 AM, Scott Wood wrote:
> >> On Fri, 2013-10-11 at 11:29 -0700, York Sun wrote:
> >>> Scott, et al.
> >>>
> >>> I'd like to start the discussion to increase u-boot image size for some
> >>> mpc85xx targets. As we all know the reset vector is at the very end and
> >>> linking process start from the top. This gives us no good choice but to
> >>> use fixed image size. While we have more and more features, the size
> >>> increases inevitably. It's time to adjust the arbitrary size. We are now
> >>> using 512KB. Shall we go with 768KB, or even 1MB?
> >>
> >> 768K would affect fewer existing partition maps (many of which leave 1M
> >> for U-Boot and environment combined), but 1M might be better for new
> >> boards.  And of course it would be nice if someone could spare some time
> >> to try to slim things down (finer-grained compile-time config,
> >> speed/size tradeoffs, etc).
> >>
> >>> For the first step, I think we don't have to increase size for all
> >>> targets. We can adjust those with CONFIG_SYS_TEXT_BASE=0xeff80000. Those
> >>> are the most recent used. There are other targets which don't use NOR
> >>> flash boot method. They should be considered as well.
> >>>
> >>> It is per board configuration. But it may be better if we keep them
> >>> consistent.
> >>
> >> I don't think it's worth trying to keep them consistent.  Leave alone
> >> old boards that are not pushing the limit, and where testing and user
> >> education would be a hassle, and let newer boards where more features
> >> are wanted not be constrained by the past.
> >>
> > 
> > I did a quick search for eff80000. Only these boards have it
> > 
> > include/configs/B4860QDS.h
> > include/configs/C29XPCIE.h
> > include/configs/corenet_ds.h
> > include/configs/HWW1U1A.h
> > include/configs/MPC8536DS.h
> > include/configs/MPC8572DS.h
> > include/configs/P1010RDB.h
> > include/configs/P1022DS.h
> > include/configs/P1023RDB.h
> > include/configs/P1023RDS.h
> > include/configs/P1_P2_RDB.h
> > include/configs/p1_p2_rdb_pc.h
> > include/configs/p1_twr.h
> > include/configs/P2020DS.h
> > include/configs/P2041RDB.h
> > include/configs/T1040QDS.h
> > include/configs/t4qds.h
> > 
> 
> Scott,
> 
> Are SPL and TPL boot methods immune from the size issue here?

Sort of.  We still need to fit inside existing partition tables.

-Scott