[U-Boot] ARM: interrupt_init before relocation, write fails

[Joe Kulikauskas]

Hi,

v2013.10-rc1 (and after) has a patch (
http://lists.denx.de/pipermail/u-boot/2013-June/156298.html) which sets up
the abort stack before relocation. However, what I am seeing:
IRQ_STACK_START_IN
is in flash at that time, so this write fails.

interrupt_init:
FF0A0FA8 e59f3010   LDR       R3,ff0a0fc0 (ff0a0050=IRQ_STACK_START_IN)

Before this patch, abort stack setup was done after relocation, so target
location is in RAM and writeable.

interrupt_init:
9FFB4020 e59f3010   LDR       R3,9ffb4038 (9ffb3054=IRQ_STACK_START_IN)

If I revert that patch, I don't see that problem.

Joe Kulikauskas