[U-Boot] [PATCH] ARM: mx5: Enable L2 cache

[Stefano Babic]

Hi Fabio,

On 30/09/2013 18:16, Fabio Estevam wrote:
> Enable L2 cache for improving the system performance.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  arch/arm/cpu/armv7/mx5/lowlevel_init.S | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
> index fc7c767..e4cd85c 100644
> --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
> +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
> @@ -45,6 +45,12 @@
>  #endif
>  
>  	mcr 15, 1, r0, c9, c0, 2
> +
> +	/* enable L2 cache */
> +	mrc 15, 0, r0, c1, c0, 1
> +	orr r0, r0, #2
> +	mcr 15, 0, r0, c1, c0, 1
> +
>  .endm /* init_l2cc */
>  
>  /* AIPS setup - Only setup MPROTx registers.
> 

This is a repost from a your previous patch on August, 19th, where you
report slow tftp transfer even with L2-cache enable. Was this issue
solved or it is completeley unrelated to the cache ?

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================