[U-Boot] [PATCH V6 07/10] usb: gadget: mv_udc: optimize bounce
Troy Kisky
troy.kisky at boundarydevices.com
Fri Oct 11 00:28:01 CEST 2013
Only perform one copy, either in the bounce
routine for IN transfers, or the debounce
rtn for OUT transfer.
On out transfers, only copy the number
of bytes received from the bounce buffer
Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
---
v4: no change
v5: no change
v6: no change
---
drivers/usb/gadget/mv_udc.c | 37 ++++++++++++++++---------------------
1 file changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc.c b/drivers/usb/gadget/mv_udc.c
index 08845de..a165e12 100644
--- a/drivers/usb/gadget/mv_udc.c
+++ b/drivers/usb/gadget/mv_udc.c
@@ -261,7 +261,7 @@ static int mv_ep_disable(struct usb_ep *ep)
return 0;
}
-static int mv_bounce(struct mv_ep *ep)
+static int mv_bounce(struct mv_ep *ep, int in)
{
uint32_t addr = (uint32_t)ep->req.buf;
uint32_t ba;
@@ -290,8 +290,8 @@ align:
if (!ep->b_buf)
return -ENOMEM;
}
-
- memcpy(ep->b_buf, ep->req.buf, ep->req.length);
+ if (in)
+ memcpy(ep->b_buf, ep->req.buf, ep->req.length);
flush:
ba = (uint32_t)ep->b_buf;
@@ -300,29 +300,25 @@ flush:
return 0;
}
-static void mv_debounce(struct mv_ep *ep)
+static void mv_debounce(struct mv_ep *ep, int in)
{
uint32_t addr = (uint32_t)ep->req.buf;
uint32_t ba = (uint32_t)ep->b_buf;
+ if (in) {
+ if (addr == ba)
+ return; /* not a bounce */
+ goto free;
+ }
invalidate_dcache_range(ba, ba + ep->b_len);
- /* Input buffer address is not aligned. */
- if (addr & (ARCH_DMA_MINALIGN - 1))
- goto copy;
-
- /* Input buffer length is not aligned. */
- if (ep->req.length & (ARCH_DMA_MINALIGN - 1))
- goto copy;
-
- /* The buffer is well aligned, only invalidate cache. */
- return;
+ if (addr == ba)
+ return; /* not a bounce */
-copy:
memcpy(ep->req.buf, ep->b_buf, ep->req.length);
-
+free:
/* Large payloads use allocated buffer, free it. */
- if (ep->req.length > 64)
+ if (ep->b_buf != ep->b_fast)
free(ep->b_buf);
}
@@ -340,7 +336,7 @@ static int mv_ep_queue(struct usb_ep *ep,
head = mv_get_qh(num, in);
len = req->length;
- ret = mv_bounce(mv_ep);
+ ret = mv_bounce(mv_ep, in);
if (ret)
return ret;
@@ -383,10 +379,9 @@ static void handle_ep_complete(struct mv_ep *ep)
num, in ? "in" : "out", item->info, item->page0);
len = (item->info >> 16) & 0x7fff;
-
- mv_debounce(ep);
-
ep->req.length -= len;
+ mv_debounce(ep, in);
+
DBG("ept%d %s complete %x\n",
num, in ? "in" : "out", len);
ep->req.complete(&ep->ep, &ep->req);
--
1.8.1.2
More information about the U-Boot
mailing list