[U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command

[Marek Vasut]

Dear Otavio Salvador,

> Hello,
> 
> I am not sure I agree ...
> 
> On Sun, Oct 27, 2013 at 6:47 PM, Marek Vasut <marex at denx.de> wrote:
> > Dear Otavio Salvador,
> > 
> >> On Sun, Oct 27, 2013 at 2:16 PM, Marek Vasut <marex at denx.de> wrote:
> >> > Dear Otavio Salvador,
> >> > 
> >> >> This reads the kernel, ftd and boot into ubifs filesystem. While on
> >> >> that, the SD firmware filename definition has been moved next to the
> >> >> other SD related commands.
> >> >> 
> >> >> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
> >> > 
> >> > Any changes to built-in environment are now NAKd I believe.
> >> 
> >> I don't see a reason to not merged it for now; I will work in porting
> >> the environments for the external file but this could go now, anyway.
> > 
> > Read [1], in particular what Stefano said.
> > 
> > http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/169042
> > 
> > Thus this patch shall be rejected as well, sorry.
> 
> I agree with the goal but until we have a way to insert the /default/
> environment into the binary of U-Boot for use (not adding an extra
> environment image) this should be accepted.

I disagree with the decision to reject the envs as well, I just present previous 
discussion here. I will pull out of this discussion and leave the rest up to 
Stefano, since this is his call afterall.

Best regards,
Marek Vasut