[U-Boot] [PATCH] Exynos5250: I2C: Fix driver as per new I2C multibus/multiadapter support
Rajeshwari S Shinde
rajeshwari.s at samsung.com
Tue Sep 3 08:20:14 CEST 2013
This patch fixes the S3C24xx I2C driver as per new I2C
multibus/multiadapter support for Exynos5250.
Change-Id: I95873fef7d312310670e3bb33ad9532c10f60463
Signed-off-by: Rajeshwari S Shinde <rajeshwari.s at samsung.com>
---
drivers/i2c/s3c24x0_i2c.c | 14 +++++++-------
include/configs/exynos5250-dt.h | 3 ++-
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index cd09c78..5fdb85f 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -53,7 +53,7 @@
static unsigned int g_current_bus __attribute__((section(".data")));
#ifdef CONFIG_OF_CONTROL
static int i2c_busses __attribute__((section(".data")));
-static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM]
+static struct s3c24x0_i2c_bus i2c_bus_data[CONFIG_SYS_NUM_I2C_BUSES]
__attribute__((section(".data")));
#endif
@@ -160,7 +160,7 @@ int i2c_set_bus_num(unsigned int bus)
{
struct s3c24x0_i2c *i2c;
- if ((bus < 0) || (bus >= CONFIG_MAX_I2C_NUM)) {
+ if ((bus < 0) || (bus >= CONFIG_SYS_NUM_I2C_BUSES)) {
debug("Bad bus: %d\n", bus);
return -1;
}
@@ -503,12 +503,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
void board_i2c_init(const void *blob)
{
int i;
- int node_list[CONFIG_MAX_I2C_NUM];
+ int node_list[CONFIG_SYS_NUM_I2C_BUSES];
int count;
count = fdtdec_find_aliases_for_id(blob, "i2c",
COMPAT_SAMSUNG_S3C2440_I2C, node_list,
- CONFIG_MAX_I2C_NUM);
+ CONFIG_SYS_NUM_I2C_BUSES);
for (i = 0; i < count; i++) {
struct s3c24x0_i2c_bus *bus;
@@ -516,7 +516,7 @@ void board_i2c_init(const void *blob)
if (node <= 0)
continue;
- bus = &i2c_bus[i];
+ bus = &i2c_bus_data[i];
bus->regs = (struct s3c24x0_i2c *)
fdtdec_get_addr(blob, node, "reg");
bus->id = pinmux_decode_periph_id(blob, node);
@@ -529,7 +529,7 @@ void board_i2c_init(const void *blob)
static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
{
if (bus_idx < i2c_busses)
- return &i2c_bus[bus_idx];
+ return &i2c_bus_data[bus_idx];
debug("Undefined bus: %d\n", bus_idx);
return NULL;
@@ -540,7 +540,7 @@ int i2c_get_bus_num_fdt(int node)
int i;
for (i = 0; i < i2c_busses; i++) {
- if (node == i2c_bus[i].node)
+ if (node == i2c_bus_data[i].node)
return i;
}
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 2b93a45..e6a2cd0 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -254,8 +254,9 @@
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */
#define CONFIG_DRIVER_S3C24X0_I2C
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_MAX_I2C_NUM 8
#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_MAX_HOPS 1
+#define CONFIG_SYS_NUM_I2C_BUSES 8
#define CONFIG_I2C_EDID
/* PMIC */
--
1.7.12.4
More information about the U-Boot
mailing list