September 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Sep 1 01:10:52 CEST 2013
Ending: Mon Sep 30 23:28:54 CEST 2013
Messages: 2098

• [U-Boot] [ARM] Returning to active state   Albert ARIBAUD
• [U-Boot] Pull request - arm/zynq v3   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/master into ARM/master   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH] arm: lds: Remove libgcc eabi exception handling tables   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH] arm: lds: Remove libgcc eabi exception handling tables   Albert ARIBAUD
• [U-Boot] [PATCH] arm: lds: Remove libgcc eabi exception handling tables   Albert ARIBAUD
• [U-Boot] [PATCH v6 1/1] socfpga: Adding configuration for development kit   Albert ARIBAUD
• [U-Boot] [PATCH v6 1/1] socfpga: Creating driver for Reset Manager   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] u-boot build error in current git tree   Albert ARIBAUD
• [U-Boot] actux2 build error due to commit 4412db46   Albert ARIBAUD
• [U-Boot] actux2 build error due to commit 4412db46   Albert ARIBAUD
• [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH v2] omap1510inn: arm925t: remove support   Albert ARIBAUD
• [U-Boot] [PATCH RESEND] gpio: spear_gpio: Fix gpio_set_value() implementation   Albert ARIBAUD
• [U-Boot] [PATCH] arm: spl: Do not set the stack pointer twice   Albert ARIBAUD
• [U-Boot] [PATCH v7 01/11] arm: dma_alloc_coherent: malloc() -> memalign()   Albert ARIBAUD
• [U-Boot] [PATCH v7 09/11] arm: add customized boot command for Faraday Images   Albert ARIBAUD
• [U-Boot] [PATCH v4 0/8] ARMv7: Add HYP mode switching support   Albert ARIBAUD
• [U-Boot] [PATCH v4 8/8] ARM: VExpress: enable ARMv7 virt support for VExpress A15   Albert ARIBAUD
• [U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS   Albert ARIBAUD
• [U-Boot] [PATCH] omap1510inn: arm925t: remove support   Albert ARIBAUD
• [U-Boot] AES: Encryption of u-boot.img   Albert ARIBAUD
• [U-Boot] [PATCH] omap1510inn: arm925t: remove support   Albert ARIBAUD
• [U-Boot] most efficient way to submit patches that are typo/grammar fixes?   Albert ARIBAUD
• [U-Boot] [PATCH RESEND] gpio: spear_gpio: Fix gpio_set_value() implementation   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] i2c: move to new subsystem   Albert ARIBAUD
• [U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.   Albert ARIBAUD
• [U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.   Albert ARIBAUD
• [U-Boot] worth correcting spelling of "redundand"?   Albert ARIBAUD
• [U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS   Albert ARIBAUD
• [U-Boot] Annoying make debug messages at v2013.10-rc3   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/3] i2c: move to new subsystem   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/4] ARM: make reserving the gd register a make variable   Albert ARIBAUD
• [U-Boot] [PATCH 0/4] ARM: s3c44b0: remove remainders of dead board   Albert ARIBAUD
• [U-Boot] [PATCH 3/3] arm: rmobile: Add support lager board   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Change clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ   Albert ARIBAUD
• [U-Boot] Annoying make debug messages at v2013.10-rc3   Albert ARIBAUD
• [U-Boot] Annoying make debug messages at v2013.10-rc3   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Change clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Albert ARIBAUD
• [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Albert ARIBAUD
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   Albert ARIBAUD
• [U-Boot] [PATCH] arm: zynq: Fix timer loadaddress   Albert ARIBAUD
• [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Remove IXP425 boards pdnb3 and scpu   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: refactor compiler options in config.mk   Albert ARIBAUD
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Albert ARIBAUD
• [U-Boot] [PATCH v3 0/3] ARM: use r9 for gd instead of r8   Albert ARIBAUD
• [U-Boot] [PATCH v4] omap1510inn: arm925t: remove support   Albert ARIBAUD
• [U-Boot] [RFC 0/3] ARM: cleanup gd init   Albert ARIBAUD
• [U-Boot] i.MX6DL/S regression in mx6dl_pins.h   Pierre AUBERT
• [U-Boot] [PATCH] ARM: arch-mx6: fix PLL2_PFD2_FREQ   Pierre AUBERT
• [U-Boot] Getting U-Boot running on Toradex Colibri T20 on Iris board   Stefan Agner
• [U-Boot] [PATCH] mmc: sdhci: use the SDHCI_QUIRK_USE_WIDE8 for samsung SoC   Pantelis Antoniou
• [U-Boot] [PATCH] mmc/dw_mmc: Fix DMA descriptor corruption   Pantelis Antoniou
• [U-Boot] [u-boot][RFC v1] omap_hsmmc: omap4+/am335x: modify MMC controller internal fsm reset func   Pantelis Antoniou
• [U-Boot] [u-boot][RFC v1] mmc: Remove unused variable backup from mmc_send_cmd()   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: Initialize mmc_devices list statically   Pantelis Antoniou
• [U-Boot] [PATCH 3/5] mmc: don't call *printf or puts when SPL & !CONFIG_SPL_LIBCOMMON_SUPPORT   Pantelis Antoniou
• [U-Boot] [PATCH 3/5] mmc: don't call *printf or puts when SPL & !CONFIG_SPL_LIBCOMMON_SUPPORT   Pantelis Antoniou
• [U-Boot] [PATCH 5/5] mmc: don't support write & erase for SPL builds   Pantelis Antoniou
• [U-Boot] [PATCH] mmc:sdhci: Fix card ready status timeout.   Pantelis Antoniou
• [U-Boot] [PATCH v2] mmc: don't support write & erase for SPL builds   Pantelis Antoniou
• [U-Boot] [PATCH] mmc:sdhci: Fix card ready status timeout.   Pantelis Antoniou
• [U-Boot] [PATCH v2] mmc: don't support write & erase for SPL builds   Pantelis Antoniou
• [U-Boot] [PATCH] mmc:sdhci: Fix card ready status timeout.   Pantelis Antoniou
• [U-Boot] [PATCH] MMC: DWMMC: Correct the CLKDIV register value   Pantelis Antoniou
• [U-Boot] Pull request: u-boot-mmc   Pantelis Antoniou
• [U-Boot] [PATCH 12/12 V3] DWMMC: SMDK5420: Disable SMU for eMMC   Pantelis Antoniou
• [U-Boot] Pull request: u-boot-mmc #2   Pantelis Antoniou
• [U-Boot] [PATCH 1/2] Armada100: Adds SD/MMC Register definitions   Pantelis Antoniou
• [U-Boot] [PATCH 2/2] Armada100: Add SD card support for Marvell gplugD   Pantelis Antoniou
• [U-Boot] [PATCH] mx6: compute PLL PFD frequencies rather than using defines   Pierre Aubert
• [U-Boot] [PATCH V2] mx6: compute PLL PFD frequencies rather than using defines   Pierre Aubert
• [U-Boot] [PATCH] ARM: arch-mx6: fix PLL2_PFD2_FREQ   Pierre Aubert
• [U-Boot] [PATCH] mx6: Fix use of improper value in enable_ipu_clock   Pierre Aubert
• [U-Boot] Problem with -pie flag.   VISWANADHULA BALAJI
• [U-Boot] Not able to get the prints in the do_irq handler   VISWANADHULA BALAJI
• [U-Boot] [PATCH RFC 0/22] i.MX6: Update pad declarations for multiple-arch binaries   Stefano Babic
• [U-Boot] [PATCH v1 0/5]   Stefano Babic
• [U-Boot] [PATCH v1 1/5] phy: add missing constants for Micrel KSZ9031   Stefano Babic
• [U-Boot] [PATCH v1 2/5] net: fix mask for phy Micrel KSZ9031   Stefano Babic
• [U-Boot] [PATCH v1 3/5] net: add extended function to phy API   Stefano Babic
• [U-Boot] [PATCH v1 4/5] net: add function to read/write extended registers in Micrel Phy   Stefano Babic
• [U-Boot] [PATCH v1 5/5] net: add support for extended registers to mdio command   Stefano Babic
• [U-Boot] [PATCH v1 0/5]   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 1/1] m28evk board config   Stefano Babic
• [U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM   Stefano Babic
• [U-Boot] [PATCH v6 2/3] apf27: add support for the armadeus APF27 board   Stefano Babic
• [U-Boot] [PATCH] mx6: Fix calculation of emi_slow clock rate   Stefano Babic
• [U-Boot] [PATCH] mxs_nand: Fix ECC strength for NAND flash with OOB size of 224   Stefano Babic
• [U-Boot] [PATCH 2/3] tools: mxsboot: Mark the FCB pages as valid   Stefano Babic
• [U-Boot] [PATCH 1/5] ARM: mxs: Sort the mx23evk and mx23_olinuxino   Stefano Babic
• [U-Boot] [PATCH 2/5] ARM: mxs: Document the power block initialization   Stefano Babic
• [U-Boot] [PATCH 3/5] ARM: mxs: Receive r0 and r1 passed from BootROM   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Add LVDS splash screen support   Stefano Babic
• [U-Boot] [PATCH v6 1/3] mx27: add missing constant for mx27   Stefano Babic
• [U-Boot] [PATCH 4/5] ARM: mxs: Add Creative ZEN XFi3 board   Stefano Babic
• [U-Boot] [PATCH 5/5] ARM: mxs: Add SanDisk Sansa Fuze+ board   Stefano Babic
• [U-Boot] [PATCH] imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip   Stefano Babic
• [U-Boot] [PATCH v4 5/7] tools: add padding of data image file for imximage   Stefano Babic
• [U-Boot] [PATCH] mxs_nand: Fix ECC strength for NAND flash with OOB size of 224   Stefano Babic
• [U-Boot] [PATCH v7 2/2] apf27: add FPGA support for the apf27 board   Stefano Babic
• [U-Boot] [PATCH v7 1/2] apf27: add support for the armadeus APF27 board   Stefano Babic
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Stefano Babic
• [U-Boot] [PATCH v2 2/2] mx6sabresd: Reset counter to prevent error message   Stefano Babic
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Stefano Babic
• [U-Boot] [PATCH 1/2] net: fec_mxc: Add support for mx6 solo-lite   Stefano Babic
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Stefano Babic
• [U-Boot] [PATCH RFC 0/22] i.MX6: Update pad declarations for multiple-arch binaries   Stefano Babic
• [U-Boot] [PATCH v2] doc: README.mxs: Add instruction to install 'libssl-dev'   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version   Stefano Babic
• [U-Boot] [PATCH] ARM: arch-mx6: fix PLL2_PFD2_FREQ   Stefano Babic
• [U-Boot] [PATCH] ARM: arch-mx6: fix PLL2_PFD2_FREQ   Stefano Babic
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Stefano Babic
• [U-Boot] [PATCH v2 2/2] mx6sabresd: Reset counter to prevent error message   Stefano Babic
• [U-Boot] [PATCH] mmc: fsl_esdhc: Check the result from malloc()   Stefano Babic
• [U-Boot] [PATCH] mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6sabresd: Return error if cpu_eth_init() fails   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6qsabreauto: Return error if cpu_eth_init() fails   Stefano Babic
• [U-Boot] [PATCH 1/2] net: fec_mxc: Add support for mx6 solo-lite   Stefano Babic
• [U-Boot] [PATCH v2 2/2] mx6slevk: Add Ethernet support   Stefano Babic
• [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10   Stefano Babic
• [U-Boot] [PATCH] mx28evk: Fix checkpatch warning   Stefano Babic
• [U-Boot] [PATCH v3] doc: README.mxs: Add instruction to install 'libssl-dev'   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version   Stefano Babic
• [U-Boot] [PATCH v2] net: fec_mxc: Fix timeouts during tftp transfer   Stefano Babic
• [U-Boot] [PATCH] wandboard: Use imx6dl-wandboard.dtb for the solo version   Stefano Babic
• [U-Boot] [PATCH 3/3] mx35pdk: Fix error handling in board_late_init()   Stefano Babic
• [U-Boot] [PATCH] tools/imximage.c: Fix compiling warning   Stefano Babic
• [U-Boot] [PATCH V5 00/18] Make mv_udc work for i.mx6   Stefano Babic
• [U-Boot] [PATCH] tools/imximage.c: Fix compiling warning   Stefano Babic
• [U-Boot] [PATCH 1/3] mx28evk: Propagate the error if cpu_eth_init() fails   Stefano Babic
• [U-Boot] [PATCH 2/3] mx28evk: Propagate the error if cpu_eth_init() fails   Stefano Babic
• [U-Boot] [PATCH 3/3] mx35pdk: Fix error handling in board_late_init()   Stefano Babic
• [U-Boot] [PATCH] mx6: Fix use of improper value in enable_ipu_clock   Stefano Babic
• [U-Boot] [PATCH V2] i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID   Stefano Babic
• [U-Boot] [PULL] : Please pull u-boot-imx   Stefano Babic
• [U-Boot] i.MX6 based board does not work if watchdog support is enabled   Stefano Babic
• [U-Boot] *** [u-boot] Error 139 when config NAND relative setting   Peter Barada
• [U-Boot] NAND flash question   Peter Barada
• [U-Boot] NAND flash question   Peter Barada
• [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Alban Bedel
• [U-Boot] [PATCH 2/2] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Alban Bedel
• [U-Boot] [PATCH 2/2] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Alban Bedel
• [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Alban Bedel
• [U-Boot] Compiling certain files with extra compiler flags   Vadim Bendebury
• [U-Boot] Compiling certain files with extra compiler flags   Vadim Bendebury
• [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a   Sharma Bhupesh-B45370
• [U-Boot] How do ARM platform initialize DDR?   Sharma Bhupesh-B45370
• [U-Boot] When to create a SoC directory for ARM   Sharma Bhupesh-B45370
• [U-Boot] When to create a SoC directory for ARM   Sharma Bhupesh-B45370
• [U-Boot] [RFC PATCH 3/3] ARM: atmel: add RNDIS gadget support   Andreas Bießmann
• [U-Boot] NAND write error with HW ECC on OMAP3   Andreas Bießmann
• [U-Boot] [RFC PATCH 3/3] ARM: atmel: add RNDIS gadget support   Andreas Bießmann
• [U-Boot] NAND write error with HW ECC on OMAP3   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Andreas Bießmann
• [U-Boot] [PATCH] MTD: atmel_nand: support for software BCH ECC   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Andreas Bießmann
• [U-Boot] [PATCH] MTD: atmel_nand: support for software BCH ECC   Andreas Bießmann
• [U-Boot] mtd: atmel_nand: pmecc: fix bug fail to correct bit error in 1024-bytes sector   Andreas Bießmann
• [U-Boot] ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTI   Andreas Bießmann
• [U-Boot] [PATCH] MTD: atmel_nand: support for software BCH ECC   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Andreas Bießmann
• [U-Boot] [PATCH] MTD: atmel_nand: support for software BCH ECC   Andreas Bießmann
• [U-Boot] NAND write error with HW ECC on OMAP3   Andreas Bießmann
• [U-Boot] NAND write error with HW ECC on OMAP3   Andreas Bießmann
• [U-Boot] U-Boot 2009.11.1 USB Issue and Building U-Boot 2013.07   Andreas Bießmann
• [U-Boot] [PATCH 01/13] tricorder: remove lcdmode from bootargs   Andreas Bießmann
• [U-Boot] [PATCH 02/13] tricorder: update flash partitioning   Andreas Bießmann
• [U-Boot] [PATCH 03/13] tricorder: use generic provided loadaddr   Andreas Bießmann
• [U-Boot] [PATCH 04/13] tricorder: add configuration for a flashcard u-boot   Andreas Bießmann
• [U-Boot] [PATCH 05/13] tricorder: add cmdline history   Andreas Bießmann
• [U-Boot] [PATCH 06/13] tricorder: add mtdparts to environment   Andreas Bießmann
• [U-Boot] [PATCH 07/13] tricorder: add tricordereeprom command   Andreas Bießmann
• [U-Boot] [PATCH 08/13] tricorder: panic() on unknown board   Andreas Bießmann
• [U-Boot] [PATCH 09/13] tricorder: add led support   Andreas Bießmann
• [U-Boot] [PATCH 10/13] tricorder: Make u-boot faster   Andreas Bießmann
• [U-Boot] [PATCH 11/13] tricorder: switch to alternative memtest   Andreas Bießmann
• [U-Boot] [PATCH 12/13] tricorder: read kernel directly from NAND   Andreas Bießmann
• [U-Boot] [PATCH 13/13] tricorder: support 256MiB SDRAM on revision > D   Andreas Bießmann
• [U-Boot] [PATCH v2] mmc: don't support write & erase for SPL builds   Andreas Bießmann
• [U-Boot] [PATCH] Subject: [PATCH v.2] at91: add support for CDU9G25 board   Andreas Bießmann
• [U-Boot] [PATCH 04/13] tricorder: add configuration for a flashcard u-boot   Andreas Bießmann
• [U-Boot] [PATCH v5] at91: add support for CDU9G25 board   Andreas Bießmann
• [U-Boot] [PATCH v5] at91: add support for CDU9G25 board   Andreas Bießmann
• [U-Boot] [PATCH] arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot   Andreas Bießmann
• [U-Boot] [PATCH] buildman: fix boards.cfg parsing   Andreas Bießmann
• [U-Boot] [U-Boot, V2] arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Andreas Bießmann
• [U-Boot] [PATCH] MMC: DWMMC: Correct the CLKDIV register value   Rajeshwari Birje
• [U-Boot] [PATCH] Exynos5250: I2C: Fix driver as per new I2C multibus/multiadapter support   Rajeshwari Birje
• [U-Boot] [PATCH] MMC: DWMMC: Correct the CLKDIV register value   Rajeshwari Birje
• [U-Boot] [PATCH] MMC: DWMMC: Correct the CLKDIV register value   Rajeshwari Birje
• [U-Boot] [PATCH 00/12 V3] EXYNOS5420: Add SMDK5420 board support   Rajeshwari Birje
• [U-Boot] [PATCH 12/12 V3] DWMMC: SMDK5420: Disable SMU for eMMC   Rajeshwari Birje
• [U-Boot] [PATCH 05/12 V3] Exynos5420: Modify TZPC init to support 5420   Rajeshwari Birje
• [U-Boot] [PATCH 05/12 V3] Exynos5420: Modify TZPC init to support 5420   Rajeshwari Birje
• [U-Boot] [PATCH 01/12 V3] EXYNOS5: Create a common board file   Rajeshwari Birje
• [U-Boot] [PATCH 11/12 V3] SPL: EXYNOS: Prepare for variable size SPL support   Rajeshwari Birje
• [U-Boot] [PATCH] MMC: DWMMC: Correct the CLKDIV register value   Rajeshwari Birje
• [U-Boot] [PATCH] drivers/net/designware - respect "bus mode" register contents on SW reset   Alexey Brodkin
• [U-Boot] [PATCH] drivers/net/designware - fix alignment of buffer descriptors   Alexey Brodkin
• [U-Boot] [PATCH v2] drivers/net/designware - fix alignment of buffer descriptors   Alexey Brodkin
• [U-Boot] [PATCH v2] drivers/net/designware - fix alignment of buffer descriptors   Alexey Brodkin
• [U-Boot] [PATCH 1/4] powerpc/83xx: remove staticness for qe_iop_conf_tab   Holger Brunck
• [U-Boot] [PATCH v2 1/3] arm/km: add support for km_kirkwood_128m16 board   Holger Brunck
• [U-Boot] [PATCH 1/3] arm/km: add support for km_kirkwood_128m16 board   Holger Brunck
• [U-Boot] (Intro) i2c:zynq: I2C multi-bus support on Zynq   Michael Burr
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Michael Burr
• [U-Boot] (Intro) i2c:zynq: I2C multi-bus support on Zynq   Michael Burr
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Michael Burr
• [U-Boot] i2c:zynq: I2C multi-bus support on Zynq   Michael Burr
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Michael Burr
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Michael Burr
• [U-Boot] [PATCH] i2c: Zynq: Support for TI PCA9548 bus multiplexer   Michael Burr
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Michael Burr
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Michael Burr
• [U-Boot] [PATCH] I2C: Zynq: Support for 0-length register address   Michael Burr
• [U-Boot] [PATCH] I2C: Zynq: Support for 0-length register address   Michael Burr
• [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Michael Burr
• [U-Boot] [PATCH v2 0/4] MTD & UBI fixes   Paul Burton
• [U-Boot] [PATCH v2 1/4] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN   Paul Burton
• [U-Boot] [PATCH 2/4] cmd_mtdparts: use 64 bits for flash size, partition size & offset   Paul Burton
• [U-Boot] [PATCH 3/4] cmd_ubi: use int64_t volume size for 'ubi create'   Paul Burton
• [U-Boot] [PATCH v2 4/4] cmd_ubi: add write.part command, to write a volume in multiple parts   Paul Burton
• [U-Boot] [PATCH 0/5] SPL/MMC size fixes   Paul Burton
• [U-Boot] [PATCH 1/5] spl: remove unnecessary (& ARM specific) include of asm/utils.h   Paul Burton
• [U-Boot] [PATCH 2/5] spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORT   Paul Burton
• [U-Boot] [PATCH 3/5] mmc: don't call *printf or puts when SPL & !CONFIG_SPL_LIBCOMMON_SUPPORT   Paul Burton
• [U-Boot] [PATCH 4/5] mmc: size optimization when !CONFIG_MMC_SPI   Paul Burton
• [U-Boot] [PATCH 5/5] mmc: don't support write & erase for SPL builds   Paul Burton
• [U-Boot] [PATCH 0/5] SPL/MMC size fixes   Paul Burton
• [U-Boot] [PATCH] bootm: use BOOTM_STATE_OS_CMDLINE flag for plain bootm   Paul Burton
• [U-Boot] [PATCH 3/5] mmc: don't call *printf or puts when SPL & !CONFIG_SPL_LIBCOMMON_SUPPORT   Paul Burton
• [U-Boot] [PATCH v2] mmc: don't support write & erase for SPL builds   Paul Burton
• [U-Boot] [PATCH v2] mmc: don't support write & erase for SPL builds   Paul Burton
• [U-Boot] [PATCH v3] mmc: don't support write & erase for SPL builds   Paul Burton
• [U-Boot] [PATCH] bootm: use BOOTM_STATE_OS_CMDLINE flag for plain bootm   Paul Burton
• [U-Boot] [PATCH] mx6sabresd: Avoid hang when HDMI cable is not connected   Eric Bénard
• [U-Boot] [PATCH 1/7] mtd: Fix function description in part_validate comment   Eric Bénard
• [U-Boot] [PATCH 5/7] gpio-led: Fix __led_toggle support to first set GPIO as input   Eric Bénard
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Eric Bénard
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Eric Bénard
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Eric Bénard
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Ian Campbell
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Ian Campbell
• [U-Boot] [PATCH v2 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h   Javier Martinez Canillas
• [U-Boot] [PATCH v2 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Javier Martinez Canillas
• [U-Boot] [PATCH] ARM: IGEP0033: Update timing to run DDR at 400MHz.   Javier Martinez Canillas
• [U-Boot] [PATCH v2 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Javier Martinez Canillas
• [U-Boot] [PATCH v2 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Javier Martinez Canillas
• [U-Boot] [PATCH v2 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Javier Martinez Canillas
• [U-Boot] [PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h   Javier Martinez Canillas
• [U-Boot] [PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h   Javier Martinez Canillas
• [U-Boot] [PATCH v3 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Javier Martinez Canillas
• [U-Boot] [PATCH v3 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Javier Martinez Canillas
• [U-Boot] Executing U-Boot from Another Boot Loader   Roy Caspi
• [U-Boot] Loading U-Boot from a Different Location on the Flash   Roy Caspi
• [U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support   Naveen Krishna Ch
• [U-Boot] NAND write error with HW ECC on OMAP3   Ash Charles
• [U-Boot] NAND write error with HW ECC on OMAP3   Ash Charles
• [U-Boot] NAND write error with HW ECC on OMAP3   Ash Charles
• [U-Boot] NAND write error with HW ECC on OMAP3   Ash Charles
• [U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support   Naveen Krishna Chatradhi
• [U-Boot] [PATCH 1/4] exynos: i2c: Fix i2c driver to handle NACKs properly   Naveen Krishna Chatradhi
• [U-Boot] [PATCH 2/4] exynos: i2c: Change FDT bus setup code to enumerate ports correctly   Naveen Krishna Chatradhi
• [U-Boot] [PATCH v5 3/4] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Chatradhi
• [U-Boot] [PATCH] RFC: samsung: i2c: Enable new CONFIG_SYS_I2C framework   Naveen Krishna Chatradhi
• [U-Boot] [PATCH] nios2: fix missing comment terminator from SPDX License commit   Thomas Chou
• [U-Boot] [PATCH] nios2: change size_t to fix format warning for gcc 4.7.3   Thomas Chou
• [U-Boot] [PATCH] nios2: change size_t to fix format warning for gcc 4.7.3   Thomas Chou
• [U-Boot] [PATCH] nios2: change size_t to fix format warning for gcc 4.7.3   Thomas Chou
• [U-Boot] Pull request: u-boot-nios/master   Thomas Chou
• [U-Boot] [PATCH] arm:goni:mmc: Add sd card detection and initialization.   Jaehoon Chung
• [U-Boot] [PATCH] arm:goni:mmc: Add sd card detection and initialization.   Jaehoon Chung
• [U-Boot] [PATCH v3] arm:goni:mmc: Add sd card detection and initialization.   Jaehoon Chung
• [U-Boot] [PATCH V2 3/5] ARM: Added I2S0 clocks for audio   Jaehoon Chung
• [U-Boot] [PATCH] MMC: DWMMC: Correct the CLKDIV register value   Jaehoon Chung
• [U-Boot] [PATCH] pmic: max77686: fix the wrong offset   Jaehoon Chung
• [U-Boot] [PATCH] powerpc/t1040qds: Add T1040QDS board   Rommel Custodio
• [U-Boot] [PATCH] powerpc/t1040qds: Add T1040QDS board   Rommel Custodio
• [U-Boot] [RFC 5/5] B4860QDS: Add support of 2 stage NAND boot loader   Rommel Custodio
• [U-Boot] [RFC 5/5] B4860QDS: Add support of 2 stage NAND boot loader   Rommel Custodio
• [U-Boot] U-boot PPC405EX with DDR2 DIMM   Rommel Custodio
• [U-Boot] Patch about mmc and sdhci, Please look it, i can not pull the patch. I copy it here.   Rommel Custodio
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Christoffer Dall
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Christoffer Dall
• [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switch to non-secure state   Christoffer Dall
• [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switch to non-secure state   Christoffer Dall
• [U-Boot] current version of u-boot doesn't seem to load kernel for beaglebone black   Robert P. J. Day
• [U-Boot] current version of u-boot doesn't seem to load kernel for beaglebone black   Robert P. J. Day
• [U-Boot] [PATCH] am335x_evm.h: Add back the actual load of the kernel image   Robert P. J. Day
• [U-Boot] RFC, am335x_evm.h patch for u-boot on SD and rest on eMMC on BBB   Robert P. J. Day
• [U-Boot] RFC, am335x_evm.h patch for u-boot on SD and rest on eMMC on BBB   Robert P. J. Day
• [U-Boot] [PATCH] am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot.   Robert P. J. Day
• [U-Boot] rename "findfdt" to, say, "selectfdt" or something similar?   Robert P. J. Day
• [U-Boot] most efficient way to submit patches that are typo/grammar fixes?   Robert P. J. Day
• [U-Boot] most efficient way to submit patches that are typo/grammar fixes?   Robert P. J. Day
• [U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.   Robert P. J. Day
• [U-Boot] [PATCH] Cosmetic: Update some info in the README "arch" section.   Robert P. J. Day
• [U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.   Robert P. J. Day
• [U-Boot] worth correcting spelling of "redundand"?   Robert P. J. Day
• [U-Boot] "make distclean" doesn't remove CHANGELOG   Robert P. J. Day
• [U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.   Robert P. J. Day
• [U-Boot] [PATCH v2] Cosmetic: Fix a number of typos, no functional changes.   Robert P. J. Day
• [U-Boot] [PATCH] Fix numerous misspellings of "redundand" and "REDUNDAND".   Robert P. J. Day
• [U-Boot] apparent(?) flaw in recent patch "am335x_evm: Switch to zImage as default rather   Robert P. J. Day
• [U-Boot] [ANN] v2013.10-rc1   Wolfgang Denk
• [U-Boot] [ANN] v2013.10-rc2 - was: v2013.10-rc1   Wolfgang Denk
• [U-Boot] U-Boot 2009.11.1 USB Issue and Building U-Boot 2013.07   Wolfgang Denk
• [U-Boot] U-Boot 2009.11.1 USB Issue and Building U-Boot 2013.07   Wolfgang Denk
• [U-Boot] [PATCH] at91: add support for CDU9G25 board   Wolfgang Denk
• [U-Boot] [PATCH 0/9] Consolidate ARM timer code   Wolfgang Denk
• [U-Boot] [PATCH] PCIe:Add a function to get the address of requested capability structure.   Wolfgang Denk
• [U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition   Wolfgang Denk
• [U-Boot] [PATCH v6 0/5] arm64 patch   Wolfgang Denk
• [U-Boot] [PATCH v6 2/5] board support of arm64   Wolfgang Denk
• [U-Boot] [PATCH v6 3/5] generic board patch of manual reloc and zero gd_t   Wolfgang Denk
• [U-Boot] [PATCH v6 5/5] remove compiling warnings   Wolfgang Denk
• [U-Boot] [PATCH] Subject: [PATCH v.2] at91: add support for CDU9G25 board   Wolfgang Denk
• [U-Boot] [PATCH 0/9] Consolidate ARM timer code   Wolfgang Denk
• [U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition   Wolfgang Denk
• [U-Boot] [PATCH 04/13] tricorder: add configuration for a flashcard u-boot   Wolfgang Denk
• [U-Boot] [PATCH] Subject: [PATCH v.2] at91: add support for CDU9G25 board   Wolfgang Denk
• [U-Boot] [PATCH v7 0/5] arm64 patch   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/t1040qds: Add T1040QDS board   Wolfgang Denk
• [U-Boot] Executing U-Boot from Another Boot Loader   Wolfgang Denk
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Wolfgang Denk
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Wolfgang Denk
• [U-Boot] [PATCH v3] at91: add support for CDU9G25 board   Wolfgang Denk
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Wolfgang Denk
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Wolfgang Denk
• [U-Boot] [PATCH v9 0/5] arm64 patch   Wolfgang Denk
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Wolfgang Denk
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Wolfgang Denk
• [U-Boot] [PATCH v2] omap1510inn: arm925t: remove support   Wolfgang Denk
• [U-Boot] most efficient way to submit patches that are typo/grammar fixes?   Wolfgang Denk
• [U-Boot] [PATCH] omap1510inn: arm925t: remove support   Wolfgang Denk
• [U-Boot] [PATCH] PCIe:change the method to get the address of a requested capability in configuration space.   Wolfgang Denk
• [U-Boot] [PATCH 0/5] Add device tree support for VxWorks   Wolfgang Denk
• [U-Boot] [PATCH v10 1/6] core support of arm64   Wolfgang Denk
• [U-Boot] [PATCH 0/5] Add device tree support for VxWorks   Wolfgang Denk
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   Wolfgang Denk
• [U-Boot] [PATCH] SPDX: fix IBM-pibs license identifier   Wolfgang Denk
• [U-Boot] [ANN] v2013.10-rc3   Wolfgang Denk
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   Wolfgang Denk
• [U-Boot] [PATCH] net: fec_mxc: Fix timeouts during tftp transfer   Wolfgang Denk
• [U-Boot] [PATCH] net: fec_mxc: Fix timeouts during tftp transfer   Wolfgang Denk
• [U-Boot] How do ARM platform initialize DDR?   Wolfgang Denk
• [U-Boot] How do ARM platform initialize DDR?   Wolfgang Denk
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Wolfgang Denk
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Wolfgang Denk
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Wolfgang Denk
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Wolfgang Denk
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Wolfgang Denk
• [U-Boot] When to create a SoC directory for ARM   Wolfgang Denk
• [U-Boot] Dual boot Images in Flash   Wolfgang Denk
• [U-Boot] [PATCH] arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH V2] arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH] coldfire: cpu5282: increase malloc space to fix crash on start u-boot   Jens Scharsig (BuS Elektronik)
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Mj Embd
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Mj Embd
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Mj Embd
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Mj Embd
• [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switch to non-secure state   Mj Embd
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Mj Embd
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Mj Embd
• [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switch to non-secure state   Mj Embd
• [U-Boot] How do ARM platform initialize DDR?   Mj Embd
• [U-Boot] [PATCH v10 1/6] core support of arm64   Mj Embd
• [U-Boot] Splashscreen on sabrelite   Fabio Estevam
• [U-Boot] Splashscreen on sabrelite   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Add LVDS splash screen support   Fabio Estevam
• [U-Boot] [PATCH 1/1] m28evk board config   Fabio Estevam
• [U-Boot] [PATCH] wandboard: Use imx6dl-wandboard.dtb for the solo version   Fabio Estevam
• [U-Boot] u-boot build error in current git tree   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Avoid hang when HDMI cable is not connected   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Avoid hang when HDMI cable is not connected   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] mx6sabresd: Reset counter to prevent error message   Fabio Estevam
• [U-Boot] [PATCH] mmc: fsl_esdhc: Check the result from malloc()   Fabio Estevam
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Fabio Estevam
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Fabio Estevam
• [U-Boot] [PATCH] mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE   Fabio Estevam
• [U-Boot] [PATCH 1/2] net: fec_mxc: Add support for mx6 solo-lite   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6slevk: Add Ethernet support   Fabio Estevam
• [U-Boot] i.MX6DL/S regression in mx6dl_pins.h   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6sabresd: Return error if cpu_eth_init() fails   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6qsabreauto: Return error if cpu_eth_init() fails   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] net: fec_mxc: Add support for mx6 solo-lite   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] mx6slevk: Add Ethernet support   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Fabio Estevam
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Fabio Estevam
• [U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Fix checkpatch warning   Fabio Estevam
• [U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'   Fabio Estevam
• [U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'   Fabio Estevam
• [U-Boot] [PATCH] doc: README.mxsimage: Use mkimage provided by U-boot   Fabio Estevam
• [U-Boot] [PATCH 2/3] tools: mxsboot: Mark the FCB pages as valid   Fabio Estevam
• [U-Boot] [PATCH] doc: README.mxsimage: Use mkimage provided by U-boot   Fabio Estevam
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Fabio Estevam
• [U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.   Fabio Estevam
• [U-Boot] [PATCH] Cosmetic: Fix a number of typoes, no functional changes.   Fabio Estevam
• [U-Boot] [PATCH] net: fec_mxc: Fix timeouts during tftp transfer   Fabio Estevam
• [U-Boot] [PATCH v2] doc: README.mxs: Add instruction to install 'libssl-dev'   Fabio Estevam
• [U-Boot] [PATCH v2] doc: README.mxs: Add instruction to install 'libssl-dev'   Fabio Estevam
• [U-Boot] [PATCH v3] doc: README.mxs: Add instruction to install 'libssl-dev'   Fabio Estevam
• [U-Boot] [PATCH] net: fec_mxc: Fix timeouts during tftp transfer   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version   Fabio Estevam
• [U-Boot] [PATCH v2] net: fec_mxc: Fix timeouts during tftp transfer   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx28evk: Propagate the error if cpu_eth_init() fails   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx28evk: Propagate the error if cpu_eth_init() fails   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx35pdk: Fix error handling in board_late_init()   Fabio Estevam
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Fabio Estevam
• [U-Boot] [PATCH v2] ARM: mxs: tools: Use mkimage for BootStream generation   Fabio Estevam
• [U-Boot] [PATCH] udoo: Add initial support for mx6q udoo board   Fabio Estevam
• [U-Boot] [PATCH] wandboard: README: Include the quad version   Fabio Estevam
• [U-Boot] [PATCH 5/7] gpio-led: Fix __led_toggle support to first set GPIO as input   Fabio Estevam
• [U-Boot] [PATCH 3/7] include/linux/fb.h: Add a missing include for 'list.h'   Fabio Estevam
• [U-Boot] [PATCH 6/7] status_led: Add support for inverted LEDs   Fabio Estevam
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Fabio Estevam
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Fabio Estevam
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Fabio Estevam
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Fabio Estevam
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Fabio Estevam
• [U-Boot] [PATCH] ARM: mx5: Enable L2 cache   Fabio Estevam
• [U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro   Fabio Estevam
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Steven Falco
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Steven Falco
• [U-Boot] [PATCH] Prevent null pointer dereference originating in cmd_pxe.c   Steven A. Falco
• [U-Boot] [PATCH] Prevent null pointer dereference originating in cmd_pxe.c   Steven A. Falco
• [U-Boot] [PATCH] vexpress/v8: Add support for SMSC91C111 integrated MAC and PHY module   FengHua
• [U-Boot] [PATCH v5 1/4] core support of arm64   FengHua
• [U-Boot] [PATCH] vexpress/v8: Add support for SMSC91C111 integrated MAC and PHY module   FengHua
• [U-Boot] [PATCH v7 1/5] core support of arm64   FengHua
• [U-Boot] [PATCH v7 0/5] arm64 patch   FengHua
• [U-Boot] [PATCH v5 1/4] core support of arm64   FengHua
• [U-Boot] [PATCH v7 1/5] core support of arm64   FengHua
• [U-Boot] [PATCH v7 1/5] core support of arm64   FengHua
• [U-Boot] [PATCH v9 0/5] arm64 patch   FengHua
• [U-Boot] [PATCH v10 1/6] core support of arm64   FengHua
• [U-Boot] When to create a SoC directory for ARM   FengHua
• [U-Boot] When to create a SoC directory for ARM   FengHua
• [U-Boot] BOOTM_STATE_OS_CMDLINE: corrupt arm bootm?   FengHua
• [U-Boot] [PATCH] usb: gadget: Fix data aborts during USB ethernet boot   Joel Fernandes
• [U-Boot] [PATCH] usb: gadget: Fix data aborts during USB ethernet boot   Joel Fernandes
• [U-Boot] [PATCH v2] usb: gadget: Fix data aborts during USB ethernet boot   Joel Fernandes
• [U-Boot] [PATCH v3] usb: gadget: Fix data aborts during USB ethernet boot   Joel Fernandes
• [U-Boot] [PATCH 3/4] dumpimage: Added a tool to extract "data files" from U-Boot multifile images   Guilherme Maciel Ferreira
• [U-Boot] [PATCH v2] net: Add fixed phy driver   Andy Fleming
• [U-Boot] [PATCH v2 1/7] USB: xHCI: Add stack support for xHCI   Vivek Gautam
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Vivek Gautam
• [U-Boot] [PATCH v3 01/10] usb: Move 'bmRequestType' USB device request macros from EHCI header   Vivek Gautam
• [U-Boot] [PATCH v3 02/10] USB: xHCI: Add stack support for xHCI   Vivek Gautam
• [U-Boot] [PATCH v3 03/10] USB: XHCI: Add xHCI host controller support for Exynos5   Vivek Gautam
• [U-Boot] [PATCH v3 04/10] arm: exynos: Add methods to control power to USB 3.0 PHY   Vivek Gautam
• [U-Boot] [PATCH v3 05/10] exynos5: dts: Add COMPAT string data for USB 3.0 PHY and XHCI   Vivek Gautam
• [U-Boot] [PATCH v3 06/10] exynos5: dts: Add device node for XHCI   Vivek Gautam
• [U-Boot] [PATCH v3 07/10] config: arm: exynos5250: Define CONFIG_SYS_CACHELINE_SIZE   Vivek Gautam
• [U-Boot] [PATCH v3 08/10] temp: config: exynos5250: Enable xHCI support for Exynos5   Vivek Gautam
• [U-Boot] [PATCH v3 09/10] exynos: usb: Switch USB VBUS GPIOs to be device tree configured   Vivek Gautam
• [U-Boot] [PATCH v3 10/10] exynos: dts: Add USB VBUS GPIOs to the device tree   Vivek Gautam
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Vivek Gautam
• [U-Boot] [PATCH v3 01/10] usb: Move 'bmRequestType' USB device request macros from EHCI header   Vivek Gautam
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Vivek Gautam
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Vivek Gautam
• [U-Boot] - Help with usb3503 hub enumeration   Vivek Gautam
• [U-Boot] BUG: fastmap and u-boot's ubi write command   Richard Genoud
• [U-Boot] BUG: fastmap and u-boot's ubi write command   Richard Genoud
• [U-Boot] BUG: fastmap and u-boot's ubi write command   Richard Genoud
• [U-Boot] Pull request for Kees Cook's compression fixes   Simon Glass
• [U-Boot] Compiling certain files with extra compiler flags   Simon Glass
• [U-Boot] [Exynos 5250 Query] Smp Boot   Simon Glass
• [U-Boot] [U-boot] Some questions about BootStage functions   Simon Glass
• [U-Boot] [U-boot] Some questions about BootStage functions   Simon Glass
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Simon Glass
• [U-Boot] [Exynos 5250 Query] Smp Boot   Simon Glass
• [U-Boot] [PATCH] cosmetic: doc: uImage.FIT: fix typos   Simon Glass
• [U-Boot] [PATCH] Fix numerous misspellings of "redundand" and "REDUNDAND".   Simon Glass
• [U-Boot] [U-boot] Some questions about BootStage functions   Simon Glass
• [U-Boot] Understanding uboot child makefiles   Simon Glass
• [U-Boot] [PATCH] cosmetic: FIT: fix typos in comments   Simon Glass
• [U-Boot] [PATCH] FIT: delete unnecessary casts   Simon Glass
• [U-Boot] [PATCH 1/4] mkimage: added 'static' specifier to match function's prototype.   Simon Glass
• [U-Boot] [PATCH 2/4] tools: moved code common to all image tools to a separated module.   Simon Glass
• [U-Boot] [PATCH 4/4] sandbox: dumpimage: Test dumpimage   Simon Glass
• [U-Boot] [PATCH 3/4] dumpimage: Added a tool to extract "data files" from U-Boot multifile images   Simon Glass
• [U-Boot] [Exynos 5250 Query] Smp Boot   Simon Glass
• [U-Boot] [PATCH 01/12 V3] EXYNOS5: Create a common board file   Simon Glass
• [U-Boot] [PATCH 02/12 V3] Exynos5420: Add base addresses for 5420   Simon Glass
• [U-Boot] [PATCH 03/12 V3] Exynos5420: Add clock initialization for 5420   Simon Glass
• [U-Boot] [PATCH 04/12 V3] Exynos5420: Add DDR3 initialization for 5420   Simon Glass
• [U-Boot] [PATCH 05/12 V3] Exynos5420: Modify TZPC init to support 5420   Simon Glass
• [U-Boot] [PATCH 06/12 V3] Exynos5420: Alter UNCON and UFCON for 5420   Simon Glass
• [U-Boot] [PATCH 07/12 V3] Exynos5420: Add support for 5420 in pinmux and gpio   Simon Glass
• [U-Boot] [PATCH 08/12 V3] Exynos5420: Add base patch for SMDK5420   Simon Glass
• [U-Boot] [PATCH 09/12 V3] DTS: Add dts support for SMDK5420   Simon Glass
• [U-Boot] [PATCH 10/12 V3] Config: Add initial config for SMDK5420   Simon Glass
• [U-Boot] [PATCH 11/12 V3] SPL: EXYNOS: Prepare for variable size SPL support   Simon Glass
• [U-Boot] [PATCH 12/12 V3] DWMMC: SMDK5420: Disable SMU for eMMC   Simon Glass
• [U-Boot] [PATCH v3 02/28] sf: probe: Add new spi_flash_probe support   Simon Glass
• [U-Boot] [PATCH 12/12 V3] DWMMC: SMDK5420: Disable SMU for eMMC   Simon Glass
• [U-Boot] [PATCH 01/12 V3] EXYNOS5: Create a common board file   Simon Glass
• [U-Boot] [PATCH v3 02/28] sf: probe: Add new spi_flash_probe support   Simon Glass
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Simon Glass
• [U-Boot] [PATCH 05/12 V3] Exynos5420: Modify TZPC init to support 5420   Simon Glass
• [U-Boot] [PATCH v2] FIT: delete unnecessary casts   Simon Glass
• [U-Boot] [PATCH v3 1/3] i2c: fix init on generic board   Simon Glass
• [U-Boot] [PATCH 01/12 V3] EXYNOS5: Create a common board file   Simon Glass
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   Simon Glass
• [U-Boot] u-boot verifiied boot question   Simon Glass
• [U-Boot] [PATCH v2 1/2] buildman: Adjust tests for new boards.cfg format   Simon Glass
• [U-Boot] [PATCH v2 2/2] buildman: Allow make flags to be specified for each board   Simon Glass
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Simon Glass
• [U-Boot] [PATCH v4 34/36] sf: Set quad enable bit support   Simon Glass
• [U-Boot] [PATCH v4 00/36] sf: Add common probe and extended/quad read/write cmds support   Simon Glass
• [U-Boot] [PATCH v4 17/36] sf: Add proper comment style on spi_flash structure   Simon Glass
• [U-Boot] [PATCH v4] sf: probe: Add support for S25FL* flash parts   Simon Glass
• [U-Boot] [PATCH v2] usb: ehci: Fix test mode for connected ports   Simon Glass
• [U-Boot] [PATCH] buildman: Use env to pick the python from $PATH   Simon Glass
• [U-Boot] : buildman error   Simon Glass
• [U-Boot] [PATCH] net: Add fixed phy driver   Christian Gmeiner
• [U-Boot] [PATCH v2] net: Add fixed phy driver   Christian Gmeiner
• [U-Boot] About patch "S3C24XX: Add support to MINI2416 board"   José Miguel Gonçalves
• [U-Boot] Does u-boot support S3C24xx nand ecc?   José Miguel Gonçalves
• [U-Boot] s3c2416 usb ohci issue   José Miguel Gonçalves
• [U-Boot] About patch "S3C24XX: Add support to MINI2416 board"   José Miguel Gonçalves
• [U-Boot] About patch "S3C24XX: Add support to MINI2416 board"   José Miguel Gonçalves
• [U-Boot] About patch "S3C24XX: Add support to MINI2416 board"   José Miguel Gonçalves
• [U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards   Igor Grinberg
• [U-Boot] [PATCH 1/2] cm-t35: move the eeprom code to common place   Igor Grinberg
• [U-Boot] [PATCH 2/2] cm-t35: move the display code to common place   Igor Grinberg
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Igor Grinberg
• [U-Boot] [PATCH v2 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Igor Grinberg
• [U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards   Igor Grinberg
• [U-Boot] [PATCH v4 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Pekon Gupta
• [U-Boot] [PATCH v4 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Pekon Gupta
• [U-Boot] [PATCH v4 2/5] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v4 3/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v4 4/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v4 5/5] board/ti/am335x/README: update for NAND boot   Pekon Gupta
• [U-Boot] [PATCH v5 5/5] board/ti/am335x/README: update for NAND boot   Pekon Gupta
• [U-Boot] [PATCH v1 0/3] mtd: nand: omap: add support for BCH16_ECC   Pekon Gupta
• [U-Boot] [PATCH v1 1/3] am33xx: elm: add support for BCH16_ECC - ELM driver updates   Pekon Gupta
• [U-Boot] [PATCH v1 2/3] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates   Pekon Gupta
• [U-Boot] [PATCH v1 3/3] am335x: update README for BCH16   Pekon Gupta
• [U-Boot] [PATCH v5 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Pekon Gupta
• [U-Boot] [PATCH v5 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Pekon Gupta
• [U-Boot] [PATCH v5 2/5] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v5 3/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v5 4/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v5 5/5] board/ti/am335x/README: update for NAND boot   Pekon Gupta
• [U-Boot] [PATCH v2 0/3] mtd: nand: omap: add support for BCH16_ECC   Pekon Gupta
• [U-Boot] [PATCH v2 1/3] am33xx: elm: add support for BCH16_ECC - ELM driver updates   Pekon Gupta
• [U-Boot] [PATCH v2 2/3] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates   Pekon Gupta
• [U-Boot] [PATCH v2 3/3] am335x: update README for BCH16   Pekon Gupta
• [U-Boot] [PATCH v1 0/4] enable support for x16 NAND devices   Pekon Gupta
• [U-Boot] [PATCH v1 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width   Pekon Gupta
• [U-Boot] [PATCH v1 2/4] mtd: nand: omap: enable autodetection of bus-width of NAND device   Pekon Gupta
• [U-Boot] [PATCH v1 3/4] am335x: fix GPMC config for NAND and NOR SPL boot   Pekon Gupta
• [U-Boot] [PATCH v1 4/4] am33xx: add support for beaglebone x16 NAND cape   Pekon Gupta
• [U-Boot] [PATCH v1 2/2] ti814x_evm: enable support for NAND   Gupta, Pekon
• [U-Boot] [PATCH v4 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
• [U-Boot] [PATCH v6 (cosmetic) 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Pekon Gupta
• [U-Boot] [PATCH v6 (cosmetic) 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Pekon Gupta
• [U-Boot] [PATCH v6 (cosmetic) 2/5] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v6 (cosmetic) 3/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v6 (cosmetic) 4/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v6 (cosmetic) 5/5] board/ti/am335x/README: update for NAND boot   Pekon Gupta
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Pekon Gupta
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Pekon Gupta
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Gupta, Pekon
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Gupta, Pekon
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Gupta, Pekon
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Gupta, Pekon
• [U-Boot] [PATCH v7 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Pekon Gupta
• [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Pekon Gupta
• [U-Boot] [PATCH v7 2/5] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v7 3/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v7 4/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes   Pekon Gupta
• [U-Boot] [PATCH v7 5/5] board/ti/am335x/README: update for NAND boot   Pekon Gupta
• [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
• [U-Boot] [PATCH v2 0/4] enable support for x16 NAND devices   Pekon Gupta
• [U-Boot] [PATCH v2 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width   Pekon Gupta
• [U-Boot] [PATCH v2 2/4] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Pekon Gupta
• [U-Boot] [PATCH v2 3/4] am335x: fix GPMC config for NAND and NOR SPL boot   Pekon Gupta
• [U-Boot] [PATCH v2 4/4] am33xx: add support for beaglebone x16 NAND cape   Pekon Gupta
• [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
• [U-Boot] [PATCH v2 1/2] ti814x: enable support for parallel NAND flash devices   Pekon Gupta
• [U-Boot] [PATCH v2 2/2] ti814x: add support for NAND flash on ti814x_evm board   Pekon Gupta
• [U-Boot] i.MX6 based board does not work if watchdog support is enabled   Anatolij Gustschin
• [U-Boot] i.MX6 based board does not work if watchdog support is enabled   Anatolij Gustschin
• [U-Boot] [PATCH] imx_watchdog: do not soft-reset while watchdog init   Anatolij Gustschin
• [U-Boot] s3c2416 usb ohci issue   Zoltan Gyarmati
• [U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition   Rob Herring
• [U-Boot] [PATCH 0/9] Consolidate ARM timer code   Rob Herring
• [U-Boot] [PATCH 1/9] ARM: add common timer functions   Rob Herring
• [U-Boot] [PATCH 2/9] examples: enable gc-sections option   Rob Herring
• [U-Boot] [PATCH 3/9] time: create default __udelay   Rob Herring
• [U-Boot] [PATCH 4/9] ARM: highbank: convert to common timer code   Rob Herring
• [U-Boot] [PATCH 5/9] ARM: mx25: convert to common timer code   Rob Herring
• [U-Boot] [PATCH 6/9] ARM: mx27: convert to common timer code   Rob Herring
• [U-Boot] [PATCH 7/9] ARM: vexpress: convert to common timer code   Rob Herring
• [U-Boot] [PATCH 8/9] ARM: socfpga: convert to common timer code   Rob Herring
• [U-Boot] [PATCH 9/9] ARM: tegra: convert to common timer code   Rob Herring
• [U-Boot] [PATCH 0/9] Consolidate ARM timer code   Rob Herring
• [U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition   Rob Herring
• [U-Boot] [PATCH 0/9] Consolidate ARM timer code   Rob Herring
• [U-Boot] [PATCH 5/9] ARM: mx25: convert to common timer code   Rob Herring
• [U-Boot] [PATCH 5/9] ARM: mx25: convert to common timer code   Rob Herring
• [U-Boot] [PATCH v7 1/5] core support of arm64   Rob Herring
• [U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition   Rob Herring
• [U-Boot] [PATCH v2] config: consolidate CONFIG_SYS_HZ definition   Rob Herring
• [U-Boot] [PATCH] net, phy, cpsw: fix unaligned access if no phy found   Joe Hershberger
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Robert Hodaszi
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Robert Hodaszi
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Robert Hodaszi
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Robert Hodaszi
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Robert Hodaszi
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Robert Hodaszi
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Robert Hodaszi
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   Jeroen Hofstee
• [U-Boot] [PATCH v2 1/4] ARM: make reserving the gd register a make variable   Jeroen Hofstee
• [U-Boot] [PATCH v2] FIT: delete unnecessary casts   Jeroen Hofstee
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   Jeroen Hofstee
• [U-Boot] [PATCH v3 0/3] ARM: use r9 for gd instead of r8   Jeroen Hofstee
• [U-Boot] [PATCH v3 1/3] ARM,relocate: do not use r9   Jeroen Hofstee
• [U-Boot] [PATCH v3 2/3] ARM: use r9 for gd   Jeroen Hofstee
• [U-Boot] [PATCH v3 3/3] README: update ARM register usage   Jeroen Hofstee
• [U-Boot] [PATCH v3 2/3] ARM: use r9 for gd   Jeroen Hofstee
• [U-Boot] [RFC 0/3] ARM: cleanup gd init   Jeroen Hofstee
• [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Jeroen Hofstee
• [U-Boot] : buildman error   Jeroen Hofstee
• [U-Boot] : buildman error   Jeroen Hofstee
• [U-Boot] [PATCH 08/10] arm: vf610: add rmii1 iomux definitions   Wang Huan-B18965
• [U-Boot] [PATCH] arm: omap5: echi: Add GPL-2.0+ SPDX-License-Identifier   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] arm: rmobile: Add support lager board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Change clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 1/3] serial: sh: Add support R8A7790   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 2/3] arm: rmobile: Add support r8a7790   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 3/3] arm: rmobile: Add support lager board   Nobuhiro Iwamatsu
• [U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/4] serial: sh: Add support R8A7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/4] net: sh-eth: Add support R8A7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/4] arm: rmobile: Add support Koelsch board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] i2c: Add support for Renesas rcar   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] i2c: Add support for Renesas rcar   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] i2c: Add support for Renesas rcar   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 1/4] serial: sh: Change The definition of clock of SCIF   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 2/4] sh: boards: Change clock definition of SCIF and TMU   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 3/4] arm: rmobile: kzm9g: Change clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 4/4] arm: rmobile: armadillo-800eva: Change clock definition of SCIF and TMU   Nobuhiro Iwamatsu
• [U-Boot] [PATCH][v2] powerpc: Fix CamelCase checkpatch warning in DDR related code   Priyanka Jain
• [U-Boot] [PATCH] sf:eon: Add support for EN25S64   Priyanka Jain
• [U-Boot] [PATCH][v3] powerpc: Fix CamelCase warnings in DDR related code   Priyanka Jain
• [U-Boot] [PATCH] Enable the DIU for P1022DS board.   Jason Jin
• [U-Boot] [PATCH v2] drivers/net/designware - fix alignment of buffer descriptors   Mischa Jonker
• [U-Boot] NAND flash question   ANDY KENNEDY
• [U-Boot] NAND flash question   ANDY KENNEDY
• [U-Boot] Possible GPL violation   Gerard Kam
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH] arm:goni:mmc: Add sd card detection and initialization.   Minkyu Kang
• [U-Boot] [PATCH] dts: samsung: arndale: Fix include path   Minkyu Kang
• [U-Boot] [PATCH] arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.   Minkyu Kang
• [U-Boot] [PATCH v3] arm:goni:mmc: Add sd card detection and initialization.   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH V4 1/3] power:battery: add battery support for Trats2 board   Minkyu Kang
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Minkyu Kang
• [U-Boot] [PATCH V4 3/3] samsung: trats2: add support for new board Trats2   Minkyu Kang
• [U-Boot] [PATCH V4 1/3] power:battery: add battery support for Trats2 board   Minkyu Kang
• [U-Boot] [PATCH] drivers:power:max77693: add support for new multi function pmic max77693   Minkyu Kang
• [U-Boot] [PATCH v3 1/3] arm:samsung:serial Extract common UART code   Minkyu Kang
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Minkyu Kang
• [U-Boot] [PATCH V2] drivers:power:max77693: add support for new multi function pmic max77693   Minkyu Kang
• [U-Boot] [PATCH V6 0/3] Introduce Samsung's new board Trats2   Minkyu Kang
• [U-Boot] About patch "S3C24XX: Add support to MINI2416 board"   Minkyu Kang
• [U-Boot] About patch "S3C24XX: Add support to MINI2416 board"   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Chander Kashyap
• [U-Boot] please pull u-boot-samsung master   Chander Kashyap
• [U-Boot] please pull u-boot-samsung master   Chander Kashyap
• [U-Boot] please pull u-boot-samsung master   Chander Kashyap
• [U-Boot] [PATCH v8 0/2] Add Arndale board support   Chander Kashyap
• [U-Boot] [PATCH v8 1/2] exynos5250: Add arndale board support   Chander Kashyap
• [U-Boot] [PATCH v8 2/2] exynos5250: arndale: Add mmc support   Chander Kashyap
• [U-Boot] please pull u-boot-samsung master   Chander Kashyap
• [U-Boot] please pull u-boot-samsung master   Chander Kashyap
• [U-Boot] [PATCH] dts: samsung: arndale: Fix include path   Chander Kashyap
• [U-Boot] [PATCH v3 1/3] arm:samsung:serial Extract common UART code   Chander Kashyap
• [U-Boot] [PATCH V4 00/17] Make mv_udc work for i.mx6   Troy Kisky
• [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT   Troy Kisky
• [U-Boot] [PATCH V4 02/17] usb: ehci-mx6: add support for host mode otg port   Troy Kisky
• [U-Boot] [PATCH V4 03/17] usb: gadget: ether set wMaxPacketSize   Troy Kisky
• [U-Boot] [PATCH V4 04/17] usb: gadget: ether: return error from rx_submit if no request   Troy Kisky
• [U-Boot] [PATCH V4 05/17] usb: gadget: mv_udc: split mv_udc.h file   Troy Kisky
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH V4 07/17] usb: gadget: mv_udc: fix typo in error message   Troy Kisky
• [U-Boot] [PATCH V4 08/17] usb: gadget: mv_udc: set is_dualspeed = 1   Troy Kisky
• [U-Boot] [PATCH V4 09/17] usb: gadget: mv_udc: fix full speed connections   Troy Kisky
• [U-Boot] [PATCH V4 10/17] usb: gadget: mv_udc: optimize bounce   Troy Kisky
• [U-Boot] [PATCH V4 11/17] usb: gadget: mv_udc: flush item before head   Troy Kisky
• [U-Boot] [PATCH V4 12/17] usb: gadget: mv_udc: optimize ep_enable   Troy Kisky
• [U-Boot] [PATCH V4 13/17] usb: gadget: mv_udc: zero transfer descriptor memory on probe   Troy Kisky
• [U-Boot] [PATCH V4 14/17] usb: gadget: mv_udc: clear desc upon ep_disable   Troy Kisky
• [U-Boot] [PATCH V4 15/17] mx6: iomux: add GPR1 defines for use with nitrogen6x   Troy Kisky
• [U-Boot] [PATCH V4 16/17] nitrogen6x: add otg usb host/device mode support   Troy Kisky
• [U-Boot] [PATCH V4 17/17] nitrogen6x: add CONFIG_MV_UDC   Troy Kisky
• [U-Boot] [PATCH V4 16/17] nitrogen6x: add otg usb host/device mode support   Troy Kisky
• [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT   Troy Kisky
• [U-Boot] [PATCH V4 02/17] usb: ehci-mx6: add support for host mode otg port   Troy Kisky
• [U-Boot] [PATCH V4 03/17] usb: gadget: ether set wMaxPacketSize   Troy Kisky
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH V4 10/17] usb: gadget: mv_udc: optimize bounce   Troy Kisky
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH V4 10/17] usb: gadget: mv_udc: optimize bounce   Troy Kisky
• [U-Boot] [PATCH V4 03/17] usb: gadget: ether set wMaxPacketSize   Troy Kisky
• [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT   Troy Kisky
• [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT   Troy Kisky
• [U-Boot] [PATCH V5 00/18] Make mv_udc work for i.mx6   Troy Kisky
• [U-Boot] [PATCH V5 01/18] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT   Troy Kisky
• [U-Boot] [PATCH V5 02/18] usb: ehci-mx6: add support for host mode otg port   Troy Kisky
• [U-Boot] [PATCH V5 03/18] usb: echi-hcd: add usb_lowlevel_init_device   Troy Kisky
• [U-Boot] [PATCH V5 04/18] usb: gadget: ether set wMaxPacketSize   Troy Kisky
• [U-Boot] [PATCH V5 05/18] usb: gadget: ether: return error from rx_submit if no request   Troy Kisky
• [U-Boot] [PATCH V5 06/18] usb: gadget: mv_udc: split mv_udc.h file   Troy Kisky
• [U-Boot] [PATCH V5 07/18] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH V5 08/18] usb: gadget: mv_udc: fix typo in error message   Troy Kisky
• [U-Boot] [PATCH V5 09/18] usb: gadget: mv_udc: set is_dualspeed = 1   Troy Kisky
• [U-Boot] [PATCH V5 10/18] usb: gadget: mv_udc: fix full speed connections   Troy Kisky
• [U-Boot] [PATCH V5 11/18] usb: gadget: mv_udc: optimize bounce   Troy Kisky
• [U-Boot] [PATCH V5 12/18] usb: gadget: mv_udc: flush item before head   Troy Kisky
• [U-Boot] [PATCH V5 13/18] usb: gadget: mv_udc: optimize ep_enable   Troy Kisky
• [U-Boot] [PATCH V5 14/18] usb: gadget: mv_udc: zero transfer descriptor memory on probe   Troy Kisky
• [U-Boot] [PATCH V5 15/18] usb: gadget: mv_udc: clear desc upon ep_disable   Troy Kisky
• [U-Boot] [PATCH V5 16/18] mx6: iomux: add GPR1 defines for use with nitrogen6x   Troy Kisky
• [U-Boot] [PATCH V5 17/18] nitrogen6x: add otg usb host/device mode support   Troy Kisky
• [U-Boot] [PATCH V5 18/18] nitrogen6x: add CONFIG_MV_UDC   Troy Kisky
• [U-Boot] [PATCH V5 00/18] Make mv_udc work for i.mx6   Troy Kisky
• [U-Boot] MAKEALL build error on usb/master branch   Troy Kisky
• [U-Boot] MAKEALL build error on usb/master branch   Troy Kisky
• [U-Boot] [PATCH V5 02/18] usb: ehci-mx6: add support for host mode otg port   Troy Kisky
• [U-Boot] [PATCH V5 03/18] usb: echi-hcd: add usb_lowlevel_init_device   Troy Kisky
• [U-Boot] [PATCH V5 07/18] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH V5 10/18] usb: gadget: mv_udc: fix full speed connections   Troy Kisky
• [U-Boot] [PATCH V5 00/18] Make mv_udc work for i.mx6   Troy Kisky
• [U-Boot] [PATCH V5 02/18] usb: ehci-mx6: add support for host mode otg port   Troy Kisky
• [U-Boot] [PATCH v4 5/5] board/ti/am335x/README: update for NAND boot   Peter Korsgaard
• [U-Boot] SPL binary too large for OMAP4460 OCM   Oleg Kosheliev
• [U-Boot] [PATCH] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Sergey Kostanbaev
• [U-Boot] [PATCH] arm: ep9315: Return back Cirrus Logic EDB9315A board support   Sergey Kostanbaev
• [U-Boot] [PATCH 0/6] [U-boot] SMDK5420: Add support for FIMD and DP   Ajay Kumar
• [U-Boot] [PATCH 1/6] exynos_fb: Remove usage of static defines   Ajay Kumar
• [U-Boot] [PATCH 2/6] arm: exynos: Add RPLL for Exynos5420   Ajay Kumar
• [U-Boot] [PATCH 3/6] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Ajay Kumar
• [U-Boot] [PATCH 4/6] video: exynos_fimd: Add framework to disable FIMD sysmmu   Ajay Kumar
• [U-Boot] [PATCH 5/6] smdk5420: Implement callbacks needed by exynos_fb driver   Ajay Kumar
• [U-Boot] [PATCH 6/6] CONFIG: SMDK5420: Enable FIMD and DP   Ajay Kumar
• [U-Boot] u-boot verifiied boot question   Vikas N Kumar
• [U-Boot] [PATCH] drivers/net/designware - respect "bus mode" register contents on SW reset   Vipin Kumar
• [U-Boot] [PATCH v2] drivers/net/designware - fix alignment of buffer descriptors   Vipin Kumar
• [U-Boot] [PATCH][v2] powerpc/mpc85xx:Update processor defines for T1040   Prabhakar Kushwaha
• [U-Boot] [PATCH][v2] powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator   Prabhakar Kushwaha
• [U-Boot] powerpc SPL framework: Avoiding relocate_code   Prabhakar Kushwaha
• [U-Boot] powerpc SPL framework: Avoiding relocate_code   Prabhakar Kushwaha
• [U-Boot] [PATCH] board/bsc9131rdb: Update IFC timings for NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH][v2] board/bsc9131rdb: Update IFC timings for NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/t1040qds: Add T1040QDS board   Prabhakar Kushwaha
• [U-Boot] [PATCH] powerpc/t1040qds: Add T1040QDS board   Prabhakar Kushwaha
• [U-Boot] [PATCH][v2] powerpc/t1040qds: Add T1040QDS board   Prabhakar Kushwaha
• [U-Boot] powerpc SPL framework: Avoiding relocate_code   Prabhakar Kushwaha
• [U-Boot] [RFC 0/5] powerpc: Add support 2 stage boot loader for corenet platform   Prabhakar Kushwaha
• [U-Boot] [RFC 1/5] powerpc:Add support of SPL non-relocation   Prabhakar Kushwaha
• [U-Boot] [RFC 2/5] powerpc/SPL:Allow Parsing of LAW table in both SPL & non SPL   Prabhakar Kushwaha
• [U-Boot] [RFC 3/5] common/env: Point default envirenoment for GD   Prabhakar Kushwaha
• [U-Boot] [RFC 4/5] SPL:Defines function required to env read for IFC & env_nand   Prabhakar Kushwaha
• [U-Boot] [RFC 5/5] B4860QDS: Add support of 2 stage NAND boot loader   Prabhakar Kushwaha
• [U-Boot] [RFC 4/5] SPL:Defines function required to env read for IFC & env_nand   Prabhakar Kushwaha
• [U-Boot] [RFC 5/5] B4860QDS: Add support of 2 stage NAND boot loader   Prabhakar Kushwaha
• [U-Boot] [RFC 5/5] B4860QDS: Add support of 2 stage NAND boot loader   Prabhakar Kushwaha
• [U-Boot] [PATCH] boards/c29xpcie: Update TLB and LAW size for IFC NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3] mtd:Increase ecc bytes to support 8K page size NAND   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3] mtd/ifc: Add support of 8K page size NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/3] board/c29xpcie: Add support of 8K page size NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH][v2] boards/c29xpcie: Update TLB and LAW size for IFC NAND, CPLD   Prabhakar Kushwaha
• [U-Boot] [RFC 4/5] SPL:Defines function required to env read for IFC & env_nand   Prabhakar Kushwaha
• [U-Boot] [u-boot-release] [PATCH 3/3] board/c29xpcie: Add support of 8K page size NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3][v2] mtd: move & update nand_ecclayout structure   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3][v2] mtd/ifc: Add support of 8K page size NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/3][v2] board/c29xpcie: Add support of 8K page size NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3][v3] mtd: move & update nand_ecclayout structure   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3][v3] mtd/ifc: Add support of 8K page size NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/3][v3] board/c29xpcie: Add support of 8K page size NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/6] part_efi: make sure the gpt_pte is freed   Mark Langsdorf
• [U-Boot] ahci: add support for LBA48 data reads   Mark Langsdorf
• [U-Boot] [PATCH 1/3] cmd_scsi: fix formatting before making additional changes   Mark Langsdorf
• [U-Boot] [PATCH 2/3] cmd_scsi: use lbaint_t for LBA values instead of u32   Mark Langsdorf
• [U-Boot] [PATCH 3/3] ahci: support LBA48 data reads for 2+TB drives   Mark Langsdorf
• [U-Boot] [PATCH 1/2] autoboot: add an option to override keyed autoboot   Mark Langsdorf
• [U-Boot] [PATCH 1/2] highbank: set AUTOBOOT_KEYED_CTRLC config option   Mark Langsdorf
• [U-Boot] [PATCH v3 0/3] arm: add support for LaCie CloudBox   Frédéric Leroy
• [U-Boot] [PATCH] Fix loading freeze when netconsole is active   Frédéric Leroy
• [U-Boot] [PATCH v2] Fix loading freeze when netconsole is active   Frédéric Leroy
• [U-Boot] [PATCH RESEND] gpio: spear_gpio: Fix gpio_set_value() implementation   Axel Lin
• [U-Boot] u-boot build error in current git tree   Axel Lin
• [U-Boot] actux2 build error due to commit 4412db46   Axel Lin
• [U-Boot] u-boot build error in current git tree   Axel Lin
• [U-Boot] [PATCH] boards.cfg: Fix the comment for invoking tools/reformat.py from vim   Axel Lin
• [U-Boot] [PATCH RESEND] gpio: spear_gpio: Fix gpio_set_value() implementation   Axel Lin
• [U-Boot] [PATCH v2] gpio: spear_gpio: Fix gpio_set_value() implementation   Axel Lin
• [U-Boot] [PATCH v2] powerpc/c29xpcie: Getting DDR SPD image from 16-bit sub-address EEPROM   Po Liu
• [U-Boot] [PATCH] powerpc/c29xpcie: add DDR ECC on off config setting   Po Liu
• [U-Boot] [PATCH v2] powerpc/c29xpcie: add DDR ECC on off config setting   Po Liu
• [U-Boot] [PATCH] powerpc/p1010rdb: add p1010rdb-pb support with updating p1010rdb-pa   Shengzhou Liu
• [U-Boot] [PATCH] powerpc/p1010rdb: update readme for p1010rdb-pb board   Shengzhou Liu
• [U-Boot] [PATCH v2] powerpc/p1010rdb: update readme for p1010rdb-pb board   Shengzhou Liu
• [U-Boot] [PATCH v3] powerpc/p1010rdb: update readme for p1010rdb-pb board   Shengzhou Liu
• [U-Boot] [PATCH] powerpc/p1010rdb: add p1010rdb-pb support with updating p1010rdb-pa   Shengzhou Liu
• [U-Boot] [PATCH 1/4] powerpc/p1010rdb: remove unused cpld_show   Shengzhou Liu
• [U-Boot] [PATCH 2/4] powerpc/eeprom: update MAX_NUM_PORTS to adapt non-256-bytes EEPROM   Shengzhou Liu
• [U-Boot] [PATCH 3/4] board/p1010rdb: add pin mux and sdhc support in any boot   Shengzhou Liu
• [U-Boot] [PATCH 4/4] powerpc/p1010rdb: add p1010rdb-pb support with updating p1010rdb-pa   Shengzhou Liu
• [U-Boot] question: why write bbt and search bbt use different ops mode in nand_bbt.c in U-boot 2013.04?   Hici Lo
• [U-Boot] [PATCH v3 0/11] Support for the kmp204x reference design   Valentin Longchamp
• [U-Boot] [PATCH v3 01/11] powerpc: cast bi_memsize to ulong for %ld usage   Valentin Longchamp
• [U-Boot] [PATCH v3 02/11] km-powerpc: move SYS_MALLOC_LEN out of keymile-common.h   Valentin Longchamp
• [U-Boot] [PATCH v3 03/11] KM: fix typo in default environment   Valentin Longchamp
• [U-Boot] [PATCH v3 04/11] KM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned board   Valentin Longchamp
• [U-Boot] [PATCH v3 05/11] KM: add CONFIG_KM_COMMON_ETH_INIT for km common eth init   Valentin Longchamp
• [U-Boot] [PATCH v3 06/11] mpc8xxx: call i2c_set_bus_num in __get_spd   Valentin Longchamp
• [U-Boot] [PATCH v3 07/11] mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it   Valentin Longchamp
• [U-Boot] [PATCH v3 08/11] net/fman: add a fm_enable_port function   Valentin Longchamp
• [U-Boot] [PATCH v3 09/11] mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into account   Valentin Longchamp
• [U-Boot] [PATCH v3 10/11] fsl/mpc85xx: define common serdes_clock_to_string function   Valentin Longchamp
• [U-Boot] [PATCH v3 11/11] mpc85xx: introduce the kmp204x reference design support   Valentin Longchamp
• [U-Boot] [PATCH 0/3] Serial Flash: call spi_flash_free more coherently   Valentin Longchamp
• [U-Boot] [PATCH 1/3] env_sf: generalize call to spi_flash_free after accesses   Valentin Longchamp
• [U-Boot] [PATCH 2/3] cmd_sf: add 'release' command   Valentin Longchamp
• [U-Boot] [PATCH 3/3] km_arm: call 'sf release' in the newenv and update scripts   Valentin Longchamp
• [U-Boot] Albert/Tom -- could we get patch applied or some feedback (was Re: [PATCH v6 1/1] socfpga: Adding configuration for development kit)   Pavel Machek
• [U-Boot] [PATCH] socfpga: Adding Freeze Controller driver   Pavel Machek
• [U-Boot] [PATCH v2] socfpga: Adding Freeze Controller driver   Pavel Machek
• [U-Boot] please pull u-boot-samsung master   Lukasz Majewski
• [U-Boot] [PATCH RFC] dfu: ram support   Lukasz Majewski
• [U-Boot] [PATCH 0/9] Consolidate ARM timer code   Lukasz Majewski
• [U-Boot] [PATCH v2 1/3] dfu: unify mmc/nand read/write ops enum   Lukasz Majewski
• [U-Boot] [PATCH v2 2/3] dfu: ram support   Lukasz Majewski
• [U-Boot] [PATCH v2 3/3] am335x_evm: enable DFU RAM   Lukasz Majewski
• [U-Boot] [PATCH 0/4] dfu: Various fixes and code optimizations   Lukasz Majewski
• [U-Boot] [PATCH 1/4] dfu:cosmetic: Fix printf text for buffer overflow condition   Lukasz Majewski
• [U-Boot] [PATCH 2/4] dfu: Make maximum DFU file size equal to default DFU data buffer   Lukasz Majewski
• [U-Boot] [PATCH 3/4] dfu: Find DFU alt setting number by passing its name   Lukasz Majewski
• [U-Boot] [PATCH 4/4] dfu: Extract common DFU code to handle "dfu_alt_info" environment variable   Lukasz Majewski
• [U-Boot] [PATCH 3/4] dfu: Find DFU alt setting number by passing its name   Lukasz Majewski
• [U-Boot] [PATCH 3/4] dfu: Find DFU alt setting number by passing its name   Lukasz Majewski
• [U-Boot] [PATCH 4/4] dfu: Extract common DFU code to handle "dfu_alt_info" environment variable   Lukasz Majewski
• [U-Boot] [PATCH V4 1/3] power:battery: add battery support for Trats2 board   Lukasz Majewski
• [U-Boot] [PATCH 4/4] dfu: Extract common DFU code to handle "dfu_alt_info" environment variable   Lukasz Majewski
• [U-Boot] [PATCH 4/4 v2] dfu: Extract common DFU code to handle "dfu_alt_info" environment variable   Lukasz Majewski
• [U-Boot] [PATCH v3 1/3] arm:samsung:serial Extract common UART code   Lukasz Majewski
• [U-Boot] [PATCH v3 2/3] dfu: ram support   Lukasz Majewski
• [U-Boot] [PATCH v3 2/3] dfu: ram support   Lukasz Majewski
• [U-Boot] [PATCH 1/3] usb:g_dnl:ums: Conditional compilation for mass storage function (f_mass_storage)   Lukasz Majewski
• [U-Boot] [PATCH 2/3] usb:gadget:Remove redundant #includes for USB composite gadget and its functions   Lukasz Majewski
• [U-Boot] [PATCH 3/3] usb:g_dnl:dfu: Download gadget and DFU function code clean up   Lukasz Majewski
• [U-Boot] [PATCH 1/3] usb:g_dnl:ums: Conditional compilation for mass storage function (f_mass_storage)   Lukasz Majewski
• [U-Boot] [PATCH v3 1/3] arm:samsung:serial Extract common UART code   Lukasz Majewski
• [U-Boot] [PATCH 1/3] usb:g_dnl:ums: Conditional compilation for mass storage function (f_mass_storage)   Lukasz Majewski
• [U-Boot] [PATCH 0/3] net: tsec: Fixes for mcast() in the tsec driver   Claudiu Manoil
• [U-Boot] [PATCH 1/3] net: Fix mcast function pointer prototype   Claudiu Manoil
• [U-Boot] [PATCH 2/3] net: tsec: Fix and cleanup tsec_mcast_addr()   Claudiu Manoil
• [U-Boot] [PATCH 3/3] net: tsec: Fix priv pointer in tsec_mcast_addr()   Claudiu Manoil
• [U-Boot] [PATCH 0/9] net: tsec: Driver portability fixes and cleanup   Claudiu Manoil
• [U-Boot] [PATCH 1/9] net: Fix mcast function pointer prototype   Claudiu Manoil
• [U-Boot] [PATCH 2/9] net: tsec: Fix and cleanup tsec_mcast_addr()   Claudiu Manoil
• [U-Boot] [PATCH 3/9] net: tsec: Fix priv pointer in tsec_mcast_addr()   Claudiu Manoil
• [U-Boot] [PATCH 4/9] net: tsec: Cleanup tsec regs init and fix __iomem warns   Claudiu Manoil
• [U-Boot] [PATCH 5/9] net: fsl_mdio: Fix warnings for __iomem pointers   Claudiu Manoil
• [U-Boot] [PATCH 6/9] net: tsec: Fix CamelCase issues around BD code   Claudiu Manoil
• [U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
• [U-Boot] [PATCH 8/9] net: tsec: Use portable regs type (uint->u32)   Claudiu Manoil
• [U-Boot] [PATCH 9/9] net: tsec: Fix mac addr setup portability, cleanup   Claudiu Manoil
• [U-Boot] [PATCH v2] arm:goni:mmc: Add sd card detection and initialization.   Przemyslaw Marczak
• [U-Boot] [PATCH] mmc:sdhci: Fix card ready status timeout.   Przemyslaw Marczak
• [U-Boot] [PATCH] arm:goni:mmc: Add sd card detection and initialization.   Przemyslaw Marczak
• [U-Boot] [PATCH] mmc:sdhci: Fix card ready status timeout.   Przemyslaw Marczak
• [U-Boot] [PATCH] arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.   Przemyslaw Marczak
• [U-Boot] [PATCH] ums: Add "dev num" parameter. Check mmc device before do ums init.   Przemyslaw Marczak
• [U-Boot] [PATCH] ums: Add "dev num" parameter. Check mmc device before do ums init.   Przemyslaw Marczak
• [U-Boot] [PATCH] ums: Add "dev num" parameter. Check mmc device before do ums init.   Przemyslaw Marczak
• [U-Boot] [PATCH] mmc:sdhci: Fix card ready status timeout.   Przemyslaw Marczak
• [U-Boot] [PATCH] arm:goni:mmc: Add sd card detection and initialization.   Przemyslaw Marczak
• [U-Boot] [PATCH] arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.   Przemyslaw Marczak
• [U-Boot] [PATCH] arm:goni:mmc: Add sd card detection and initialization.   Przemyslaw Marczak
• [U-Boot] [PATCH] mmc:sdhci: Fix card ready status timeout.   Przemyslaw Marczak
• [U-Boot] [PATCH v3] arm:goni:mmc: Add sd card detection and initialization.   Przemyslaw Marczak
• [U-Boot] [PATCH] mmc:sdhci: Fix card ready status timeout.   Przemyslaw Marczak
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Peter Maydell
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Peter Maydell
• [U-Boot] [PATCH] powerpc/usb: Mention usb1 before usb2 inside default hwconfig string   Ramneek Mehresh
• [U-Boot] [PATCH 0/2]powerpc/usb:Intergrate multiple USB controller support   Ramneek Mehresh
• [U-Boot] [PATCH 1/2] powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs   Ramneek Mehresh
• [U-Boot] [PATCH 2/2] powerpc/usb:Differentiate USB controller base address   Ramneek Mehresh
• [U-Boot] [PATCH] at91: add defines for reset type   Meier, Roger
• [U-Boot] [PATCH] boards.cfg: show info about boards.cfg instead of MAINTAINERS   Roger Meier
• [U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS   Meier, Roger
• [U-Boot] [PATCH] Makefile: Do not show make debug messages   Nishanth Menon
• [U-Boot] [PATCH] Makefile: Do not show make debug messages   Nishanth Menon
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Oliver Metz
• [U-Boot] U-boot PPC405EX with DDR2 DIMM   Steve Miller
• [U-Boot] U-boot PPC405EX with DDR2 DIMM   Steve Miller
• [U-Boot] [PATCH RFC] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH RFC] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v2 1/3] dfu: unify mmc/nand read/write ops enum   Afzal Mohammed
• [U-Boot] [PATCH v2 2/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v2 3/3] am335x_evm: enable DFU RAM   Afzal Mohammed
• [U-Boot] [PATCH v2 2/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v3 0/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v3 1/3] dfu: unify mmc/nand read/write ops enum   Afzal Mohammed
• [U-Boot] [PATCH v3 2/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v3 3/3] am335x_evm: enable DFU RAM   Afzal Mohammed
• [U-Boot] [PATCH v4 0/3] dfu ram support   Afzal Mohammed
• [U-Boot] [PATCH v4 1/3] dfu: unify mmc/nand read/write ops enum   Afzal Mohammed
• [U-Boot] [PATCH v4 2/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v4 3/3] am335x_evm: enable DFU RAM   Afzal Mohammed
• [U-Boot] [PATCH v3 2/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v3 2/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v3 0/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v5 0/3] dfu ram support   Afzal Mohammed
• [U-Boot] [PATCH v5 1/3] dfu: unify mmc/nand read/write ops enum   Afzal Mohammed
• [U-Boot] [PATCH v5 2/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH v5 3/3] am335x_evm: enable DFU RAM   Afzal Mohammed
• [U-Boot] [PATCH v4 2/3] dfu: ram support   Afzal Mohammed
• [U-Boot] [PATCH V2 3/5] ARM: Added I2S0 clocks for audio   D Krishna Mohan
• [U-Boot] [PATCH V2 0/5] EXYNOS: I2S: Enable I2S0 channel   Dani Krishna Mohan
• [U-Boot] [PATCH V2 1/5] Sound: WM8994: Support I2S0 channel   Dani Krishna Mohan
• [U-Boot] [PATCH V2 2/5] DTS: Addition of I2S0 channel and replacing I2S1   Dani Krishna Mohan
• [U-Boot] [PATCH V2 3/5] ARM: Added I2S0 clocks for audio   Dani Krishna Mohan
• [U-Boot] [PATCH V2 4/5] Sound: I2S: Replacing I2S1 with I2S0 channel.   Dani Krishna Mohan
• [U-Boot] [PATCH V2 5/5] Sound: MAX98095: Support I2S0 channel   Dani Krishna Mohan
• [U-Boot] [PATCH V3 0/5] EXYNOS: I2S: Enable I2S0 channel   Dani Krishna Mohan
• [U-Boot] [PATCH V3 1/5] Sound: WM8994: Support I2S0 channel   Dani Krishna Mohan
• [U-Boot] [PATCH V3 2/5] DTS: Addition of I2S0 channel and replacing I2S1   Dani Krishna Mohan
• [U-Boot] [PATCH V3 3/5] ARM: Added I2S0 clocks for audio   Dani Krishna Mohan
• [U-Boot] [PATCH V3 4/5] Sound: I2S: Replacing I2S1 with I2S0 channel.   Dani Krishna Mohan
• [U-Boot] [PATCH V3 5/5] Sound: MAX98095: Support I2S0 channel   Dani Krishna Mohan
• [U-Boot] [PATCH v2 1/7] USB: xHCI: Add stack support for xHCI   Dan Murphy
• [U-Boot] [PATCH v2 2/7] USB: XHCI: Add xHCI host controller support for Exynos5   Dan Murphy
• [U-Boot] [PATCH 3/5] USB: xHCI: Add header for readl/writel functions   Dan Murphy
• [U-Boot] [PATCH v3 02/10] USB: xHCI: Add stack support for xHCI   Dan Murphy
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Dan Murphy
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Dan Murphy
• [U-Boot] Failing USB devices   Andrew Murray
• [U-Boot] [PATCH RFC] usb: Prevent using reserved registers on DM36x usb   Andrew Murray
• [U-Boot] [PATCH v2] usb: Prevent using reserved registers on DM36x usb   Andrew Murray
• [U-Boot] [PATCH RFC] usb: Prevent using reserved registers on DM36x usb   Andrew Murray
• [U-Boot] [PATCH v2] net, phy, cpsw: fix NULL pointer deference   Mugunthan V N
• [U-Boot] [PATCH v3] net, phy, cpsw: fix NULL pointer deference   Mugunthan V N
• [U-Boot] [PATCH 0/1] Fix ethernet regression on pcm051   Mugunthan V N
• [U-Boot] [PATCH RFC 0/22] i.MX6: Update pad declarations for multiple-arch binaries   Eric Nelson
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Eric Nelson
• [U-Boot] [PATCH v2 2/2] mx6sabresd: Reset counter to prevent error message   Eric Nelson
• [U-Boot] i.MX6DL/S regression in mx6dl_pins.h   Eric Nelson
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Eric Nelson
• [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10   Eric Nelson
• [U-Boot] [PATCH RFC 0/22] i.MX6: Update pad declarations for multiple-arch binaries   Eric Nelson
• [U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected   Eric Nelson
• [U-Boot] [RFC PATCH 0/3] i.MX6 (DQ/DLS): consolidate mux and pad names   Eric Nelson
• [U-Boot] [RFC PATCH 1/3] i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents   Eric Nelson
• [U-Boot] [RFC PATCH 2/3] i.MX6DQ/DLS: remove useless mux/pad declarations   Eric Nelson
• [U-Boot] [RFC PATCH 3/3] i.MX6DQ: Add Pinmux settings that are present in Linux and Dual-Lite/Solo   Eric Nelson
• [U-Boot] [PATCH v3 09/28] sf: probe: Add support for SST25* flash parts   Eric Nelson
• [U-Boot] [PATCH 0/2] i2c: port i2c driver to new subsystem   Eric Nelson
• [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version   Eric Nelson
• [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version   Eric Nelson
• [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version   Eric Nelson
• [U-Boot] i.MX6SL pad declarations (was [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations)   Eric Nelson
• [U-Boot] [PATCH] i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID   Eric Nelson
• [U-Boot] [RFC PATCH 0/3] i.MX6 (DQ/DLS): consolidate mux and pad names   Eric Nelson
• [U-Boot] [PATCH] mx6: Fix use of improper value in enable_ipu_clock   Eric Nelson
• [U-Boot] [RFC PATCH 0/3] i.MX6 (DQ/DLS): consolidate mux and pad names   Eric Nelson
• [U-Boot] [PATCH V2] i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID   Eric Nelson
• [U-Boot] [PATCH v3] socfpga: Adding Freeze Controller driver   Dinh Nguyen
• [U-Boot] [PATCH] ARM: arch-mx6: fix PLL2_PFD2_FREQ   Markus Niebel
• [U-Boot] [PATCH] ARM: i.MX6: add i.MX6D to detected variants   Markus Niebel
• [U-Boot] [PATCH] ARM: arch-mx6: fix PLL2_PFD2_FREQ   Markus Niebel
• [U-Boot] [PATCH] Fix wrong sdhci host control register read and write   Juhyun (Justin) Oh
• [U-Boot] P2041RDB fails to boot with master (and 2013.10-rc1)   Chris Packham
• [U-Boot] P2041RDB fails to boot with master (and 2013.10-rc1)   Chris Packham
• [U-Boot] P2041RDB fails to boot with master (and 2013.10-rc1)   Chris Packham
• [U-Boot] [PATCH] powerpc/p2041: fix I2C controller's offset   Chris Packham
• [U-Boot] [PPC] get_timer without CONFIG_INTERRUPTS   Chris Packham
• [U-Boot] gpmi-nand driver and jffs2 support   Hector Palacios
• [U-Boot] gpmi-nand driver and jffs2 support   Hector Palacios
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Hector Palacios
• [U-Boot] [PATCH] net: fec_mxc: Fix timeouts during tftp transfer   Hector Palacios
• [U-Boot] gpmi-nand driver and jffs2 support   Hector Palacios
• [U-Boot] gpmi-nand driver and jffs2 support   Hector Palacios
• [U-Boot] SPL port for omap l138   Laszlo Papp
• [U-Boot] [PATCH] powerpc/c29xpcie: DDR ECC off since hardware issue   Liu Po-B43644
• [U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller.   Sourav Poddar
• [U-Boot] [UBOOT][PATCHv3 1/7] omap5: add qspi support   Sourav Poddar
• [U-Boot] [UBOOT][PATCHv3 2/7] armv7: hw_data: change clock divider setting.   Sourav Poddar
• [U-Boot] [UBOOT][PATCHv3 3/7] drivers: mtd: :spi: Add quad read support   Sourav Poddar
• [U-Boot] [UBOOT][PATCHv3 4/7] driver: mtd: spi: Add memory mapped read support   Sourav Poddar
• [U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver   Sourav Poddar
• [U-Boot] [UBOOT][PATCHv3 6/7] dra7xx_evm: add SPL API, QSPI, and serial flash support   Sourav Poddar
• [U-Boot] [UBOOT][PATCHv3 7/7] README: qspi usecase and testing documentation.   Sourav Poddar
• [U-Boot] [PATCH 0/1] Fix ethernet regression on pcm051   Lars Poeschel
• [U-Boot] [PATCH 1/1] pcm051: Supply a bd_ram_ofs for the cpsw driver   Lars Poeschel
• [U-Boot] BOOTM_STATE_OS_CMDLINE: corrupt arm bootm?   Lars Poeschel
• [U-Boot] [PATCH v2 0/1] Fix ethernet regression on pcm051 and igep0033   Lars Poeschel
• [U-Boot] [PATCH v2 1/1] pcm051/igep0033: Supply bd_ram_ofs for cpsw driver   Lars Poeschel
• [U-Boot] [PATCH] at91: add support for CDU9G25 board   Jiri Prchal
• [U-Boot] [PATCH] Subject: [PATCH v.2] at91: add support for CDU9G25 board   Jiri Prchal
• [U-Boot] [PATCH v3] at91: add support for CDU9G25 board   Jiri Prchal
• [U-Boot] [PATCH v4] at91: add support for CDU9G25 board   Jiri Prchal
• [U-Boot] [PATCH v5] at91: add support for CDU9G25 board   Jiri Prchal
• [U-Boot] [PATCH] Subject: [PATCH v.2] at91: add support for CDU9G25 board   Jiří Prchal
• [U-Boot] [PATCH] Subject: [PATCH v.2] at91: add support for CDU9G25 board   Jiří Prchal
• [U-Boot] [PATCH v5] at91: add support for CDU9G25 board   Jiří Prchal
• [U-Boot] [PATCH v5] at91: add support for CDU9G25 board   Jiří Prchal
• [U-Boot] [PATCH] powerpc/mpc8xxx: Fix CamelCase for DDR code   Jain Priyanka-B32167
• [U-Boot] [PATCH] sf:eon: Add support for EN25S64   Jain Priyanka-B32167
• [U-Boot] [PATCH v5 0/8] ARMv7: Add HYP mode switching support   Andre Przywara
• [U-Boot] [PATCH v5 1/8] ARM: prepare armv7.h to be included from assembly source   Andre Przywara
• [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH v5 4/8] ARM: add C function to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH v5 5/8] ARM: trigger non-secure state switch during bootm execution   Andre Przywara
• [U-Boot] [PATCH v5 6/8] ARM: add SMP support for non-secure switch   Andre Przywara
• [U-Boot] [PATCH v5 7/8] ARM: extend non-secure switch to also go into HYP mode   Andre Przywara
• [U-Boot] [PATCH v5 8/8] ARM: VExpress: enable ARMv7 virt support for VExpress A15   Andre Przywara
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Andre Przywara
• [U-Boot] [PATCH v5 3/8] ARM: add assembly routine to switch to non-secure state   Andre Przywara
• [U-Boot] [RFD] OMAP5: Working HYP mode   Andre Przywara
• [U-Boot] [PATCH 0/5] ARM: Exynos5250: consolidate configuration files   Andre Przywara
• [U-Boot] [PATCH 1/5] ARM: Exynos5250: rename obsoleted CONFIG_PMIC defines   Andre Przywara
• [U-Boot] [PATCH 2/5] ARM: Exynos5250: remove redundant defines in exynos5250-dt.h   Andre Przywara
• [U-Boot] [PATCH 3/5] ARM: Exynos5250: move feature defines out of generic config file   Andre Przywara
• [U-Boot] [PATCH 4/5] ARM: snow: move defines for Chromebook embedded controller   Andre Przywara
• [U-Boot] [PATCH 5/5] ARM: Arndale: include generic exynos5250-dt.h in arndale.h   Andre Przywara
• [U-Boot] [PATCH 1/2] Corenet/p5040/SGMII:fix the problem for SGMII5/6   Zhao Qiang
• [U-Boot] [PATCH 2/2] SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode   Zhao Qiang
• [U-Boot] [PATCH] PCIe:Add a function to get the address of requested capability structure.   Zhao Qiang
• [U-Boot] [PATCH] PCIe:change the method to get the address of a requested capability in configuration space.   Zhao Qiang
• [U-Boot] [PATCH v3] PCIe:change the method to get the address of a requested capability in configuration space.   Zhao Qiang
• [U-Boot] [PATCH] p1010rdb: enable mtdparts for NAND   Zhao Qiang
• [U-Boot] [PATCH v3] PCIe:change the method to get the address of a requested capability in configuration space.   Zhao Qiang-B45475
• [U-Boot] SPL binary too large for OMAP4460 OCM   Sricharan R
• [U-Boot] SPL binary too large for OMAP4460 OCM   Sricharan R
• [U-Boot] SPL binary too large for OMAP4460 OCM   Sricharan R
• [U-Boot] SPL binary too large for OMAP4460 OCM   Sricharan R
• [U-Boot] - Help with usb3503 hub enumeration   Suriyan Ramasami
• [U-Boot] - Help with usb3503 hub enumeration   Suriyan Ramasami
• [U-Boot] [PATCH] Tegra114: Fix PLLX M, N, P init settings   Thierry Reding
• [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Thierry Reding
• [U-Boot] [PATCH 1/2] image: Don't relocate ramdisk to highmem   Thierry Reding
• [U-Boot] [PATCH 2/2] image: Only relocate ramdisk when necessary   Thierry Reding
• [U-Boot] [PATCH] pci: Properly configure prefetchable memory region   Thierry Reding
• [U-Boot] [PATCH 1/4] net: rtl8169: Fix format string   Thierry Reding
• [U-Boot] [PATCH 2/4] net: rtl8169: Improve cache maintenance   Thierry Reding
• [U-Boot] [PATCH 3/4] net: rtl8169: Add support for RTL8168d/8111d   Thierry Reding
• [U-Boot] [PATCH 4/4] net: rtl8169: Add support for RTL8168evl/8111evl   Thierry Reding
• [U-Boot] [PATCH] Change maintainer for Avionic Design boards   Thierry Reding
• [U-Boot] [PATCH v2 1/2] Tegra114: Fix PLLX M, N, P init settings   Thierry Reding
• [U-Boot] [PATCH v2 2/2] Tegra114: Do not program CPCON field for PLLX   Thierry Reding
• [U-Boot] [PATCH v6 0/3] apf27: add support of armadeus apf27   Philippe Reynes
• [U-Boot] [PATCH v6 1/3] mx27: add missing constant for mx27   Philippe Reynes
• [U-Boot] [PATCH v6 2/3] apf27: add support for the armadeus APF27 board   Philippe Reynes
• [U-Boot] [PATCH v6 3/3] apf27: add FPGA support for the apf27 board   Philippe Reynes
• [U-Boot] mxc_i2c: add new i2c subsystem support   Philippe Reynes
• [U-Boot] [PATCH v7 0/2] apf27: add support of armadeus apf27   Philippe Reynes
• [U-Boot] [PATCH v7 1/2] apf27: add support for the armadeus APF27 board   Philippe Reynes
• [U-Boot] [PATCH v7 2/2] apf27: add FPGA support for the apf27 board   Philippe Reynes
• [U-Boot] [PATCH 0/2] i2c: port i2c driver to new subsystem   Philippe Reynes
• [U-Boot] [PATCH 1/2] i2c: move to new subsystem   Philippe Reynes
• [U-Boot] [PATCH 2/2] i2c: update config using mxc driver to new subsystem   Philippe Reynes
• [U-Boot] [PATCH v2 0/3] i2c, mxc: switch to new multibus/multiadapter framework   Philippe Reynes
• [U-Boot] [PATCH v2 1/3] i2c: fix init on generic board   Philippe Reynes
• [U-Boot] [PATCH v2 2/3] i2c: move to new subsystem   Philippe Reynes
• [U-Boot] [PATCH v2 3/3] i2c: update config using mxc driver to new subsystem   Philippe Reynes
• [U-Boot] [PATCH v3 0/3] i2c, mxc: switch to new multibus/multiadapter framework   Philippe Reynes
• [U-Boot] [PATCH v3 1/3] i2c: fix init on generic board   Philippe Reynes
• [U-Boot] [PATCH v3 2/3] i2c: mxc: move to new subsystem   Philippe Reynes
• [U-Boot] [PATCH v3 3/3] i2c: update config using mxc driver to new subsystem   Philippe Reynes
• [U-Boot] [PATCH v4 0/3] i2c, mxc: switch to new multibus/multiadapter framework   Philippe Reynes
• [U-Boot] [PATCH v4 1/3] i2c: fix init on generic board   Philippe Reynes
• [U-Boot] [PATCH v4 2/3] i2c: mxc: move to new subsystem   Philippe Reynes
• [U-Boot] [PATCH v4 3/3] i2c: update config using mxc driver to new subsystem   Philippe Reynes
• [U-Boot] [ANN] v2013.10-rc1   Tom Rini
• [U-Boot] [PATCH 1/5] ARM: mxs: Sort the mx23evk and mx23_olinuxino   Tom Rini
• [U-Boot] [PATCH v3 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Tom Rini
• [U-Boot] [PATCH] net, phy, cpsw: fix unaligned access if no phy found   Tom Rini
• [U-Boot] SPL binary too large for OMAP4460 OCM   Tom Rini
• [U-Boot] patchwork updated   Tom Rini
• [U-Boot] [PATCH] nios2: change size_t to fix format warning for gcc 4.7.3   Tom Rini
• [U-Boot] Pull request for Kees Cook's compression fixes   Tom Rini
• [U-Boot] [PATCH] Enable serial console only before booting   Tom Rini
• [U-Boot] [PATCH v2] dfu:mmc: raw data write fix   Tom Rini
• [U-Boot] Pull request: u-boot-nios/master   Tom Rini
• [U-Boot] [PATCH] am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF   Tom Rini
• [U-Boot] standalone-examples: support custom GCC lib   Tom Rini
• [U-Boot] fs: fat: don't call disk_write with zero sector num   Tom Rini
• [U-Boot] git-mailrc: Update MMC custodian   Tom Rini
• [U-Boot] [U-Boot, 1/1] compiler_gcc: do not redefine __gnu_attributes   Tom Rini
• [U-Boot] [U-Boot, v2, 1/8] ahci: use ports implemented map instead of num_ports   Tom Rini
• [U-Boot] [U-Boot, v2] Always build u-boot.img when using CONFIG_SPL_FRAMEWORK   Tom Rini
• [U-Boot] mail: Fix email address   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] fw_env: add redundant env support for MTD_ABSENT   Tom Rini
• [U-Boot] [U-Boot,v2,1/2] config.mk: Delete unnecessary code   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] Please pull u-boot-ppc4xx/master   Tom Rini
• [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] [PATCH] am335x_evm.h: Add back the actual load of the kernel image   Tom Rini
• [U-Boot] actux2 build error due to commit 4412db46   Tom Rini
• [U-Boot] standalone-examples: support custom GCC lib   Tom Rini
• [U-Boot] [PATCH] am335x_evm: Re-work eMMC environment   Tom Rini
• [U-Boot] [PATCH v7 1/5] core support of arm64   Tom Rini
• [U-Boot] [PATCH v7 1/5] core support of arm64   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS   Tom Rini
• [U-Boot] [PATCH] am335x_evm: Re-work eMMC environment   Tom Rini
• [U-Boot] Pull request: u-boot-mpc85xx   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [ANN] v2013.10-rc3   Tom Rini
• [U-Boot] [PATCH] doc: README.mxsimage: Use mkimage provided by U-boot   Tom Rini
• [U-Boot] Annoying make debug messages at v2013.10-rc3   Tom Rini
• [U-Boot] [PATCH v1 2/2] ti814x_evm: enable support for NAND   Tom Rini
• [U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition   Tom Rini
• [U-Boot] How do ARM platform initialize DDR?   Tom Rini
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   Tom Rini
• [U-Boot] How do ARM platform initialize DDR?   Tom Rini
• [U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition   Tom Rini
• [U-Boot] [PATCH v6 (cosmetic) 5/5] board/ti/am335x/README: update for NAND boot   Tom Rini
• [U-Boot] Pull request: u-boot-mmc   Tom Rini
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   Tom Rini
• [U-Boot] Pull request: u-boot-mmc #2   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Fix some obvious typos across multiple subsystems.   Tom Rini
• [U-Boot] bootm: use BOOTM_STATE_OS_CMDLINE flag for plain bootm   Tom Rini
• [U-Boot] [U-Boot, v2] Fix loading freeze when netconsole is active   Tom Rini
• [U-Boot] [U-Boot,1/6] part_efi: make sure the gpt_pte is freed   Tom Rini
• [U-Boot] boards.cfg: Fix the comment for invoking tools/reformat.py from vim   Tom Rini
• [U-Boot] boards.cfg: show info about boards.cfg instead of MAINTAINERS   Tom Rini
• [U-Boot] cosmetic: doc: uImage.FIT: fix typos   Tom Rini
• [U-Boot] Cosmetic: Update some info in the README "arch" section.   Tom Rini
• [U-Boot] git-mailrc: Update SPI custodian   Tom Rini
• [U-Boot] [U-Boot, v2] Cosmetic: Fix a number of typos, no functional changes.   Tom Rini
• [U-Boot] arm: omap5: echi: Add GPL-2.0+ SPDX-License-Identifier   Tom Rini
• [U-Boot] SPDX: fix IBM-pibs license identifier   Tom Rini
• [U-Boot] cosmetic: FIT: fix typos in comments   Tom Rini
• [U-Boot] Makefile: Do not show make debug messages   Tom Rini
• [U-Boot] [U-Boot,v2] FIT: delete unnecessary casts   Tom Rini
• [U-Boot] buildman: fix boards.cfg parsing   Tom Rini
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Tom Rini
• [U-Boot] [PATCH] cmd_bootm.c: Only pass BOOTM_STATE_OS_CMDLINE on PowerPC/MIPS   Tom Rini
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Tom Rini
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Tom Rini
• [U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks   Tom Rini
• [U-Boot] [PATCH] cmd_pxe.c: Pass along 'cmdtp' to do_bootm()/do_bootz()   Tom Rini
• [U-Boot] [PATCH] am335x_evm: Switch to zImage as default rather than uImage   Tom Rini
• [U-Boot] [PATCH] cmd_bootm.c: Only pass BOOTM_STATE_OS_CMDLINE on PowerPC/MIPS   Tom Rini
• [U-Boot] [PATCH] cmd_pxe.c: Pass along 'cmdtp' to do_bootm()/do_bootz()   Tom Rini
• [U-Boot] [PATCH V3 0/5] EXYNOS: I2S: Enable I2S0 channel   Tom Rini
• [U-Boot] [PATCH V3 0/5] EXYNOS: I2S: Enable I2S0 channel   Tom Rini
• [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Tom Rini
• [U-Boot] [PATCH 00/11] NAND/MMC environment in SPL, Falcon Mode enhancements   Tom Rini
• [U-Boot] [PATCH 01/11] fw_env.c: Increase max dev path to 32   Tom Rini
• [U-Boot] [PATCH 02/11] env_mmc.c: Make the non-redundant env_relocate_spec use malloc not stack   Tom Rini
• [U-Boot] [PATCH 03/11] env_mmc.c: Allow environment to be used within SPL   Tom Rini
• [U-Boot] [PATCH 04/11] mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPL   Tom Rini
• [U-Boot] [PATCH 05/11] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL   Tom Rini
• [U-Boot] [PATCH 06/11] spl: Make CONFIG_SPL_ENV_SUPPORT have to be set by all users of env in SPL   Tom Rini
• [U-Boot] [PATCH 07/11] am335x_evm: Make SPL_OS also check the boot_os variable for falcon mode   Tom Rini
• [U-Boot] [PATCH 08/11] README: Add CONFIG_SPL_OS_BOOT to README   Tom Rini
• [U-Boot] [PATCH 09/11] README.falcon: Document environment variables for falcon mode   Tom Rini
• [U-Boot] [PATCH 10/11] a3m071: Make spl_start_uboot test like getenv_yesno does   Tom Rini
• [U-Boot] [PATCH 11/11] spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what to boot   Tom Rini
• [U-Boot] [PATCH 05/11] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL   Tom Rini
• [U-Boot] When to create a SoC directory for ARM   Tom Rini
• [U-Boot] When to create a SoC directory for ARM   Tom Rini
• [U-Boot] [PATCH 05/11] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL   Tom Rini
• [U-Boot] When to create a SoC directory for ARM   Tom Rini
• [U-Boot] [PATCH v4 00/36] sf: Add common probe and extended/quad read/write cmds support   Tom Rini
• [U-Boot] [PATCH 0/2] Add bootcount support to SPL   Tom Rini
• [U-Boot] [PATCH 1/2] SPL: Add CONFIG_SPL_BOOTCOUNT_SUPPORT   Tom Rini
• [U-Boot] [PATCH 2/2] am335x: Switch to CONFIG_SPL_BOOTCOUNT_SUPPORT   Tom Rini
• [U-Boot] [PATCH] ppc4xx: Fix GPIO handling in lwmon5 and lcd4_lwmon5 BSP   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH v2 0/4] MTD & UBI fixes   Stefan Roese
• [U-Boot] [PATCH] arm: Remove IXP425 boards pdnb3 and scpu   Stefan Roese
• [U-Boot] [PATCH v2 0/4] MTD & UBI fixes   Stefan Roese
• [U-Boot] [PATCH v2 0/4] MTD & UBI fixes   Stefan Roese
• [U-Boot] U-boot PPC405EX with DDR2 DIMM   Stefan Roese
• [U-Boot] [PATCH v2] arm: Remove IXP425 boards pdnb3 and scpu   Stefan Roese
• [U-Boot] [PATCH 10/11] a3m071: Make spl_start_uboot test like getenv_yesno does   Stefan Roese
• [U-Boot] [PATCH 1/2] SPL: Add CONFIG_SPL_BOOTCOUNT_SUPPORT   Stefan Roese
• [U-Boot] [PATCH] spl: Add bootcount/bootlimit support   Stefan Roese
• [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Stefan Roese
• [U-Boot] [PATCH RFC 0/22] i.MX6: Update pad declarations for multiple-arch binaries   Otavio Salvador
• [U-Boot] [PATCH 1/5] ARM: mxs: Sort the mx23evk and mx23_olinuxino   Otavio Salvador
• [U-Boot] [PATCH 1/2] net: fec_mxc: Add support for mx6 solo-lite   Otavio Salvador
• [U-Boot] [PATCH RFC 0/22] i.MX6: Update pad declarations for multiple-arch binaries   Otavio Salvador
• [U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10   Otavio Salvador
• [U-Boot] [PATCH] doc: README.mxsimage: Use mkimage provided by U-boot   Otavio Salvador
• [U-Boot] [PATCH v2] doc: README.mxs: Add instruction to install 'libssl-dev'   Otavio Salvador
• [U-Boot] [PATCH 01/10] arm: vf610: fix anadig register struct   Otavio Salvador
• [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version   Otavio Salvador
• [U-Boot] [PATCH 3/4] dumpimage: Added a tool to extract "data files" from U-Boot multifile images   Otavio Salvador
• [U-Boot] [PATCH] Prevent a U-Boot crash on Wandboard   Otavio Salvador
• [U-Boot] [PATCH] ARM: mxs: tools: Use mkimage for BootStream generation   Otavio Salvador
• [U-Boot] [PATCH] ARM: mxs: tools: Use mkimage for BootStream generation   Otavio Salvador
• [U-Boot] [PATCH] ARM: mxs: tools: Use mkimage for BootStream generation   Otavio Salvador
• [U-Boot] [PATCH v3] ARM: mxs: tools: Use mkimage for BootStream generation   Otavio Salvador
• [U-Boot] [PATCH v3] ARM: mxs: tools: Use mkimage for BootStream generation   Otavio Salvador
• [U-Boot] NAND crazy behavior - mtd->size changing without clear reason   Otavio Salvador
• [U-Boot] NAND crazy behavior - mtd->size changing without clear reason   Otavio Salvador
• [U-Boot] NAND crazy behavior - mtd->size changing without clear reason   Otavio Salvador
• [U-Boot] [PATCH 0/2] Add bootcount support to SPL   Otavio Salvador
• [U-Boot] [PATCH 1/7] mtd: Fix function description in part_validate comment   Otavio Salvador
• [U-Boot] [PATCH 2/7] doc: Fix a typo in the description in doc/README.JFFS2_NAND   Otavio Salvador
• [U-Boot] [PATCH 3/7] include/linux/fb.h: Add a missing include for 'list.h'   Otavio Salvador
• [U-Boot] [PATCH 4/7] gpio-led: Use __led_set in __led_init code   Otavio Salvador
• [U-Boot] [PATCH 5/7] gpio-led: Fix __led_toggle support to first set GPIO as input   Otavio Salvador
• [U-Boot] [PATCH 6/7] status_led: Add support for inverted LEDs   Otavio Salvador
• [U-Boot] [PATCH 7/7] cmd_led: Add support for inverted BIT leds   Otavio Salvador
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Otavio Salvador
• [U-Boot] [PATCH 5/7] gpio-led: Fix __led_toggle support to first set GPIO as input   Otavio Salvador
• [U-Boot] [PATCH 6/7] status_led: Add support for inverted LEDs   Otavio Salvador
• [U-Boot] [PATCH v2 1/6] mtd: Fix function description in part_validate comment   Otavio Salvador
• [U-Boot] [PATCH v2 2/6] include/linux/fb.h: Add a missing include for 'list.h'   Otavio Salvador
• [U-Boot] [PATCH v2 3/6] doc: Fix a typo in the description in doc/README.JFFS2_NAND   Otavio Salvador
• [U-Boot] [PATCH v2 4/6] status_led: Print an error when the LED id is out of range   Otavio Salvador
• [U-Boot] [PATCH v2 5/6] status_led: Add support for inverted LEDs   Otavio Salvador
• [U-Boot] [PATCH v2 6/6] cmd_led: Add support for inverted BIT leds   Otavio Salvador
• [U-Boot] i.MX6 based board does not work if watchdog support is enabled   Otavio Salvador
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Otavio Salvador
• [U-Boot] i.MX6 based board does not work if watchdog support is enabled   Otavio Salvador
• [U-Boot] i.MX6 based board does not work if watchdog support is enabled   Otavio Salvador
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Otavio Salvador
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Otavio Salvador
• [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Otavio Salvador
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Otavio Salvador
• [U-Boot] SPL binary too large for OMAP4460 OCM   André Schaller
• [U-Boot] U-Boot 2009.11.1 USB Issue and Building U-Boot 2013.07   Jens Scharsig
• [U-Boot] [PATCH] arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot   Jens Scharsig
• [U-Boot] [RFC] i2c_reloc_fixup fails on m68k   Jens Scharsig
• [U-Boot] [RFC] i2c_reloc_fixup fails on m68k   Jens Scharsig
• [U-Boot] [PATCH v3] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Heiko Schocher
• [U-Boot] [PATCH] Exynos5250: I2C: Fix driver as per new I2C multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH] net, phy, cpsw: fix unaligned access if no phy found   Heiko Schocher
• [U-Boot] [PATCH v1 0/2] arm, da85x: updates for the ipam390 board   Heiko Schocher
• [U-Boot] [PATCH v1 1/2] nand, davinci: add special UBL ecc position   Heiko Schocher
• [U-Boot] [PATCH v1 2/2] arm, da85x: update for the ipam390 board   Heiko Schocher
• [U-Boot] [PATCH] net, phy, cpsw: fix unaligned access if no phy found   Heiko Schocher
• [U-Boot] [PATCH v2] net, phy, cpsw: fix NULL pointer deference   Heiko Schocher
• [U-Boot] [PATCH 2/3] net, phy: fix NULL pointer deference   Heiko Schocher
• [U-Boot] [PATCH v2] net, phy, cpsw: fix NULL pointer deference   Heiko Schocher
• [U-Boot] [PATCH v3] net, phy, cpsw: fix NULL pointer deference   Heiko Schocher
• [U-Boot] [PATCH v2 0/2] arm, da85x: updates for the ipam390 board   Heiko Schocher
• [U-Boot] [PATCH v2 1/2] nand, davinci: add special UBL ecc position   Heiko Schocher
• [U-Boot] [PATCH v2 2/2] arm, da85x: update for the ipam390 board   Heiko Schocher
• [U-Boot] mxc_i2c: add new i2c subsystem support   Heiko Schocher
• [U-Boot] [PATCH] SPL: P1022DS: switch to new multibus/multiadapter support   Heiko Schocher
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix the I2C bus speed error on p1022   Heiko Schocher
• [U-Boot] [i2c] Pull request   Heiko Schocher
• [U-Boot] P2041RDB fails to boot with master (and 2013.10-rc1)   Heiko Schocher
• [U-Boot] [PATCH 1/3] video, cfb_console: make background and foreground color configurable   Heiko Schocher
• [U-Boot] [PATCH 1/4] dfu:cosmetic: Fix printf text for buffer overflow condition   Heiko Schocher
• [U-Boot] [PATCH 2/4] dfu: Make maximum DFU file size equal to default DFU data buffer   Heiko Schocher
• [U-Boot] [PATCH 4/4] dfu: Extract common DFU code to handle "dfu_alt_info" environment variable   Heiko Schocher
• [U-Boot] [PATCH 3/4] dfu: Find DFU alt setting number by passing its name   Heiko Schocher
• [U-Boot] [PATCH] powerpc/p2041: fix I2C controller's offset   Heiko Schocher
• [U-Boot] [PATCH v4 1/3] dfu: unify mmc/nand read/write ops enum   Heiko Schocher
• [U-Boot] [PATCH v4 2/3] dfu: ram support   Heiko Schocher
• [U-Boot] [PATCH 1/2] i2c: move to new subsystem   Heiko Schocher
• [U-Boot] [PATCH 2/2] i2c: update config using mxc driver to new subsystem   Heiko Schocher
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Heiko Schocher
• [U-Boot] i2c:zynq: I2C multi-bus support on Zynq   Heiko Schocher
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Heiko Schocher
• [U-Boot] [PATCH] net, phy: fix AR8031 phy_mask   Heiko Schocher
• [U-Boot] [RFC] i2c_reloc_fixup fails on m68k   Heiko Schocher
• [U-Boot] [PATCH] i2c: Add support for Renesas rcar   Heiko Schocher
• [U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support   Heiko Schocher
• [U-Boot] [PATCH] bootm: use BOOTM_STATE_OS_CMDLINE flag for plain bootm   Daniel Schwierzeck
• [U-Boot] Albert/Tom -- could we get patch applied or some feedback (was Re: [PATCH v6 1/1] socfpga: Adding configuration for development kit)   Chin Liang See
• [U-Boot] [RESEND PATCH v7 1/2] socfpga: Adding System Manager driver   Chin Liang See
• [U-Boot] [RESEND PATCH v6 2/2] socfpga: Adding pin mux handoff files   Chin Liang See
• [U-Boot] [PATCH] socfpga: Adding Freeze Controller driver   Chin Liang See
• [U-Boot] [RESEND PATCH v7 1/2] socfpga: Adding System Manager driver   Chin Liang See
• [U-Boot] [RESEND PATCH v6 2/2] socfpga: Adding pin mux handoff files   Chin Liang See
• [U-Boot] [PATCH] socfpga: Adding Freeze Controller driver   Chin Liang See
• [U-Boot] [PATCH v2] socfpga: Adding Freeze Controller driver   Chin Liang See
• [U-Boot] [PATCH v2] socfpga: Adding Freeze Controller driver   Chin Liang See
• [U-Boot] [PATCH v3] socfpga: Adding Freeze Controller driver   Chin Liang See
• [U-Boot] [PATCH v3] socfpga: Adding Freeze Controller driver   Chin Liang See
• [U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver   Chin Liang See
• [U-Boot] [PATCH] ARM: IGEP0033: Update timing to run DDR at 400MHz.   Enric Balletbo i Serra
• [U-Boot] [PATCH 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h   Enric Balletbo Serra
• [U-Boot] [PATCH 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Enric Balletbo Serra
• [U-Boot] [PATCH v2 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h   Enric Balletbo Serra
• [U-Boot] [PATCH v2 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Enric Balletbo Serra
• [U-Boot] [PATCH 0/1] Fix ethernet regression on pcm051   Enric Balletbo Serra
• [U-Boot] [PATCH 1/1] net/phy: realtek: Fix the PHY ID mask to ensure the correct Realtek PHY is detected   Bhupesh Sharma
• [U-Boot] [PATCH] vexpress/v8: Add support for SMSC91C111 integrated MAC and PHY module   Bhupesh Sharma
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master   Bo Shen
• [U-Boot] [RFC PATCH 0/3] USB: atmel: add atmel usba udc driver support   Bo Shen
• [U-Boot] [RFC PATCH 1/3] USB: gadget: add atmel usba udc driver   Bo Shen
• [U-Boot] [RFC PATCH 2/3] ARM: atmel: correct UDPHS name   Bo Shen
• [U-Boot] [RFC PATCH 3/3] ARM: atmel: add RNDIS gadget support   Bo Shen
• [U-Boot] [RFC PATCH 1/3] USB: gadget: add atmel usba udc driver   Bo Shen
• [U-Boot] [RFC PATCH 3/3] ARM: atmel: add RNDIS gadget support   Bo Shen
• [U-Boot] [RFC PATCH 3/3] ARM: atmel: add RNDIS gadget support   Bo Shen
• [U-Boot] [RFC PATCH 3/3] ARM: atmel: add RNDIS gadget support   Bo Shen
• [U-Boot] [PATCH] MTD: atmel_nand: support for software BCH ECC   Bo Shen
• [U-Boot] [PATCH] MTD: atmel_nand: support for software BCH ECC   Bo Shen
• [U-Boot] [PATCH v3] usb: gadget: Fix data aborts during USB ethernet boot   Bo Shen
• [U-Boot] [PATCH v2 0/3] USB: atmel: add atmel usba udc driver support   Bo Shen
• [U-Boot] [PATCH v2 1/3] USB: gadget: add atmel usba udc driver   Bo Shen
• [U-Boot] [PATCH v2 2/3] ARM: atmel: correct UDPHS name   Bo Shen
• [U-Boot] [PATCH v2 3/3] ARM: atmel: add RNDIS gadget support   Bo Shen
• [U-Boot] [PATCH v2 0/3] USB: atmel: add atmel usba udc driver support   Bo Shen
• [U-Boot] [PATCH v2 3/3] ARM: atmel: add RNDIS gadget support   Bo Shen
• [U-Boot] [PATCH v3 0/4] USB: atmel: add atmel usba udc driver support   Bo Shen
• [U-Boot] [PATCH v3 1/4] usb: gadget: config: fix unaligned access issues   Bo Shen
• [U-Boot] [PATCH v3 2/4] USB: gadget: add atmel usba udc driver   Bo Shen
• [U-Boot] [PATCH v3 3/4] ARM: atmel: correct UDPHS name   Bo Shen
• [U-Boot] [PATCH v3 4/4] ARM: atmel: add RNDIS gadget support   Bo Shen
• [U-Boot] [PATCH v4] at91: add support for CDU9G25 board   Bo Shen
• [U-Boot] [PATCH] net: macb: get DMA bus width from design config register   Bo Shen
• [U-Boot] [PATCH] USB: gadget: atmel: disconnect before unbind   Bo Shen
• [U-Boot] [PATCH] powerpc/eeprom: update MAX_NUM_PORTS to adapt non-256-bytes EEPROM   Liu Shengzhou-B36685
• [U-Boot] [PATCH 2/4] powerpc/eeprom: update MAX_NUM_PORTS to adapt non-256-bytes EEPROM   Liu Shengzhou-B36685
• [U-Boot] [u-boot-release] [PATCH 3/3] board/c29xpcie: Add support of 8K page size NAND flash   Liu Shengzhou-B36685
• [U-Boot] gpmi-nand driver and jffs2 support   Huang Shijie
• [U-Boot] gpmi-nand driver and jffs2 support   Huang Shijie
• [U-Boot] gpmi-nand driver and jffs2 support   Huang Shijie
• [U-Boot] gpmi-nand driver and jffs2 support   Huang Shijie
• [U-Boot] gpmi-nand driver and jffs2 support   Huang Shijie
• [U-Boot] gpmi-nand driver and jffs2 support   Huang Shijie
• [U-Boot] [PATCH 00/10] EXYNOS5420: Add SMDK5420 board support   Rajeshwari S Shinde
• [U-Boot] [PATCH 01/10] EXYNOS5: Create a common board file   Rajeshwari S Shinde
• [U-Boot] [PATCH 02/10] Exynos5420: Add base addresses for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 03/10] Exynos5420: Add clock initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 04/10] Exynos5420: Add DDR3 initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 05/10] Exynos5420: Modify TZPC init to support 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 06/10] Exynos5420: Alter UNCON and UFCON for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 07/10] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari S Shinde
• [U-Boot] [PATCH 08/10] Exynos5420: Add base patch for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 09/10] DTS: Add dts support for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 10/10] Config: Add initial config for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 00/10 V2] EXYNOS5420: Add SMDK5420 board support   Rajeshwari S Shinde
• [U-Boot] [PATCH 01/10 V2] EXYNOS5: Create a common board file   Rajeshwari S Shinde
• [U-Boot] [PATCH 02/10 V2] Exynos5420: Add base addresses for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 03/10 V2] Exynos5420: Add clock initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 04/10 V2] Exynos5420: Add DDR3 initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 05/10 V2] Exynos5420: Modify TZPC init to support 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 06/10 V2] Exynos5420: Alter UNCON and UFCON for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 07/10 V2] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari S Shinde
• [U-Boot] [PATCH 08/10 V2] Exynos5420: Add base patch for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 09/10 V2] DTS: Add dts support for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 10/10 V2] Config: Add initial config for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH] Exynos5250: I2C: Fix driver as per new I2C multibus/multiadapter support   Rajeshwari S Shinde
• [U-Boot] [PATCH 00/12 V3] EXYNOS5420: Add SMDK5420 board support   Rajeshwari S Shinde
• [U-Boot] [PATCH 01/12 V3] EXYNOS5: Create a common board file   Rajeshwari S Shinde
• [U-Boot] [PATCH 02/12 V3] Exynos5420: Add base addresses for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 03/12 V3] Exynos5420: Add clock initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 04/12 V3] Exynos5420: Add DDR3 initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 05/12 V3] Exynos5420: Modify TZPC init to support 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 06/12 V3] Exynos5420: Alter UNCON and UFCON for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 07/12 V3] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari S Shinde
• [U-Boot] [PATCH 08/12 V3] Exynos5420: Add base patch for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 09/12 V3] DTS: Add dts support for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 10/12 V3] Config: Add initial config for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 11/12 V3] SPL: EXYNOS: Prepare for variable size SPL support   Rajeshwari S Shinde
• [U-Boot] [PATCH 12/12 V3] DWMMC: SMDK5420: Disable SMU for eMMC   Rajeshwari S Shinde
• [U-Boot] [PATCH 00/10 V4] EXYNOS5420: Add SMDK5420 board support   Rajeshwari S Shinde
• [U-Boot] [PATCH 01/10 V4] EXYNOS5: Create a common board file   Rajeshwari S Shinde
• [U-Boot] [PATCH 02/10 V4] Exynos5420: Add base addresses for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 03/10 V4] Exynos5420: Add clock initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 04/10 V4] Exynos5420: Add DDR3 initialization for 5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 05/10 V4] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari S Shinde
• [U-Boot] [PATCH 06/10 V4] Exynos5420: Add base patch for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 07/10 V4] DTS: Add dts support for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 08/10 V4] Config: Add initial config for SMDK5420   Rajeshwari S Shinde
• [U-Boot] [PATCH 09/10 V4] SPL: EXYNOS: Prepare for variable size SPL support   Rajeshwari S Shinde
• [U-Boot] [PATCH 10/10 V4] DWMMC: SMDK5420: Disable SMU for eMMC   Rajeshwari S Shinde
• [U-Boot] [PATCH v3 02/28] sf: probe: Add new spi_flash_probe support   Sascha Silbe
• [U-Boot] [PATCH v3 07/28] sf: probe: Add support for W25* flash parts   Sascha Silbe
• [U-Boot] [PATCH v3 14/28] sf: probe: Add support for erase sector selection flag   Sascha Silbe
• [U-Boot] Pull request - arm/zynq v3   Michal Simek
• [U-Boot] [PATCH] arm: lds: Remove libgcc eabi exception handling tables   Michal Simek
• [U-Boot] [PATCH] arm: lds: Remove libgcc eabi exception handling tables   Michal Simek
• [U-Boot] [PATCH] arm: lds: Remove libgcc eabi exception handling tables   Michal Simek
• [U-Boot] i2c:zynq: I2C multi-bus support on Zynq   Michal Simek
• [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Michal Simek
• [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Michal Simek
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Michal Simek
• [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Michal Simek
• [U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq   Michal Simek
• [U-Boot] [PATCH] I2C: Zynq: Support for 0-length register address   Michal Simek
• [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Michal Simek
• [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Michal Simek
• [U-Boot] [PATCH 00/19] First step towards Kbuild: Use Kbuild style makefiles   Gerhard Sittig
• [U-Boot] [PATCH v3 2/3] dfu: ram support   Gerhard Sittig
• [U-Boot] [PATCH 00/19] First step towards Kbuild: Use Kbuild style makefiles   Gerhard Sittig
• [U-Boot] [PATCH] powerpc/eeprom: update MAX_NUM_PORTS to adapt non-256-bytes EEPROM   York Sun
• [U-Boot] [PATCH v2 09/11] fsl/mpc85xx: introduce fsl_print_rcw function   York Sun
• [U-Boot] [PATCH v2 06/11] mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it   York Sun
• [U-Boot] [PATCH v2 11/11] mpc85xx: introduce the kmp204x reference design support   York Sun
• [U-Boot] [PATCH] powerpc/mpc8xxx: Fix CamelCase for DDR code   York Sun
• [U-Boot] [PATCH] powerpc/p2041: fix I2C controller's offset   York Sun
• [U-Boot] [PATCH v4 5/7] tools: add padding of data image file for imximage   York Sun
• [U-Boot] [PATCH v4 5/7] tools: add padding of data image file for imximage   York Sun
• [U-Boot] Pull request: u-boot-mpc85xx   York Sun
• [U-Boot] [PATCH 2/4] powerpc/eeprom: update MAX_NUM_PORTS to adapt non-256-bytes EEPROM   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx: Add workaround for erratum A006379   York Sun
• [U-Boot] [Patch v2] powerpc/mpc85xx: Add workaround for erratum A006379   York Sun
• [U-Boot] [Patch v3] powerpc/mpc85xx: Add workaround for erratum A006379   York Sun
• [U-Boot] How do ARM platform initialize DDR?   York Sun
• [U-Boot] How do ARM platform initialize DDR?   York Sun
• [U-Boot] How the ORx in MPC8641d soc Registers are filled?   York Sun
• [U-Boot] How do ARM platform initialize DDR?   York Sun
• [U-Boot] How do ARM platform initialize DDR?   York Sun
• [U-Boot] How do ARM platform initialize DDR?   York Sun
• [U-Boot] [PATCH v3] powerpc/p1010rdb: update readme for p1010rdb-pb board   York Sun
• [U-Boot] [PATCH] powerpc/c29xpcie: Getting DDR SPD image from 16-bit sub-address EEPROM   York Sun
• [U-Boot] [PATCH] tools/imximage.c: Fix compiling warning   York Sun
• [U-Boot] [PATCH] powerpc/tool/pbl: fix pbl image compiling process   York Sun
• [U-Boot] When to create a SoC directory for ARM   York Sun
• [U-Boot] When to create a SoC directory for ARM   York Sun
• [U-Boot] When to create a SoC directory for ARM   York Sun
• [U-Boot] When to create a SoC directory for ARM   York Sun
• [U-Boot] When to create a SoC directory for ARM   York Sun
• [U-Boot] When to create a SoC directory for ARM   York Sun
• [U-Boot] When to create a SoC directory for ARM   York Sun
• [U-Boot] When to create a SoC directory for ARM   York Sun
• [U-Boot] [PATCH 2/2] SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode   York Sun
• [U-Boot] [PATCH] powerpc: add CONFIG_SECURE_BOOT condition into fsl_secure_boot.h   York Sun
• [U-Boot] [PATCH] powerpc:c29xpcie: make ifc timing parameter flexible   York Sun
• [U-Boot] [PATCH] powerpc/c29xpcie: modify DDR parameter to make DDR more stable   York Sun
• [U-Boot] [PATCH] powerpc/mpc85xx:Make L2 cache type independent of CHASSIS2   York Sun
• [U-Boot] [PATCH][v3] powerpc: Fix CamelCase warnings in DDR related code   York Sun
• [U-Boot] [PATCH][v2] powerpc/mpc85xx:Update processor defines for T1040   York Sun
• [U-Boot] [PATCH][v2] powerpc/mpc85xx:Avoid fix clk groups for Cluster & HW accelerator   York Sun
• [U-Boot] [PATCH 1/2] Corenet/p5040/SGMII:fix the problem for SGMII5/6   York Sun
• [U-Boot] [PATCH 1/3] powerpc: p1_p2_rdb_pc: Enable p1_p2_rdb_pc to boot from SD Card with SPL   York Sun
• [U-Boot] [PATCH 2/3] powerpc : p1_p2_rdb_pc : Enable p1_p2_rdb_pc to start from eSPI with SPL   York Sun
• [U-Boot] [PATCH 3/3] powerpc: p1_p2_rdb_pc: add TPL for p1_p2_rdb_pc nand boot   York Sun
• [U-Boot] [U-Boot, v2] board/bsc9131rdb: Update IFC timings for NAND flash   York Sun
• [U-Boot] [PATCH] powerpc/usb: Mention usb1 before usb2 inside default hwconfig string   York Sun
• [U-Boot] [PATCH] powerpc/t4240: updated rcw_cfg to align with default hardware configuration   York Sun
• [U-Boot] [PATCH] powerpc/B4860: enable PBL tool for B4860   York Sun
• [U-Boot] [PATCH] powerpc/tool/pbl: fix pbl image compiling process   York Sun
• [U-Boot] [PATCH][v2] powerpc/t1040qds: Add T1040QDS board   York Sun
• [U-Boot] [PATCH 1/2] powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs   York Sun
• [U-Boot] [PATCH][v2] powerpc/t1040qds: Add T1040QDS board   York Sun
• [U-Boot] [PATCH] Enable the DIU for P1022DS board.   Timur Tabi
• [U-Boot] [PATCH v2] powerpc/c29xpcie: Getting DDR SPD image from 16-bit sub-address EEPROM   Timur Tabi
• [U-Boot] How do ARM platform initialize DDR?   Timur Tabi
• [U-Boot] How do ARM platform initialize DDR?   Timur Tabi
• [U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM   Tapani
• [U-Boot] [RFD] OMAP5: Working HYP mode   Alexander Tarasikov
• [U-Boot] [PATCH] HACK: enable HYP mode on OMAP5   Alexander Tarasikov
• [U-Boot] U-Boot mini-summit at ELCE 2013 in Edinburgh - call for participation!   Jagan Teki
• [U-Boot] [PATCH] sf:eon: Add support for EN25S64   Jagan Teki
• [U-Boot] [PATCH] sf:eon: Add support for EN25S64   Jagan Teki
• [U-Boot] [PATCH v3 00/28] sf: Add common probe support   Jagan Teki
• [U-Boot] (Intro) i2c:zynq: I2C multi-bus support on Zynq   Jagan Teki
• [U-Boot] [PATCH v3 00/28] sf: Add common probe support   Jagan Teki
• [U-Boot] [PATCH v3 02/28] sf: probe: Add new spi_flash_probe support   Jagan Teki
• [U-Boot] [PATCH v3 07/28] sf: probe: Add support for W25* flash parts   Jagan Teki
• [U-Boot] [PATCH v3 14/28] sf: probe: Add support for erase sector selection flag   Jagan Teki
• [U-Boot] [PATCH v3 02/28] sf: probe: Add new spi_flash_probe support   Jagan Teki
• [U-Boot] [PATCH v4 00/36] sf: Add common probe and extended/quad read/write cmds support   Jagan Teki
• [U-Boot] [PATCH v4 31/36] sf: Add extended read commands support   Jagan Teki
• [U-Boot] [PATCH v4 31/36] sf: Add extended read commands support   Jagan Teki
• [U-Boot] [PATCH v4 31/36] sf: Add extended read commands support   Jagan Teki
• [U-Boot] [PATCH v4 00/36] sf: Add common probe and extended/quad read/write cmds support   Jagan Teki
• [U-Boot] [PATCH v4 00/36] sf: Add common probe and extended/quad read/write cmds support   Jagan Teki
• [U-Boot] : buildman error   Jagan Teki
• [U-Boot] : buildman error   Jagan Teki
• [U-Boot] : buildman error   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 00/28] sf: Add common probe support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 01/28] sf: Divide spi_flash into multiple parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 02/28] sf: probe: Add new spi_flash_probe support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 03/28] sf: probe: Add support for M25P* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 04/28] sf: probe: Add support for EN25Q* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 05/28] sf: probe: Add support for GD25* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 06/28] sf: probe: Add support for MX25L* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 07/28] sf: probe: Add support for W25* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 08/28] sf: probe: Add support for S25FL* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 09/28] sf: probe: Add support for SST25* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 10/28] sf: probe: Add support for AT45DB* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 11/28] sf: probe: Give proper spacing on flash table params   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 12/28] sf: probe: Add support for SST_WP   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 13/28] sf: probe: Add support to clear flash BP# bits   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 14/28] sf: probe: Add support for erase sector selection flag   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 15/28] sf: probe: Add support for flag status polling   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 16/28] sf: probe: Move BAR config to spi_flash_validate_ids   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 17/28] sf: Add proper comment style on spi_flash structure   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 18/28] sf: ramtron: Add support for separate flash driver   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 19/28] sf: Remove unneeded flash drivers files   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 20/28] sf: probe: Add support for EN25Q64   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 21/28] sf: probe: Add support for S25FL256S_256K   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 22/28] sf: probe: Add support for S25FL512S_256K   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 23/28] sf: probe: Use print_size arg as page_size   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 24/28] sf: probe: Print erase_size while printing flash details   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 25/28] sf: probe: Simply the BAR configuration logic   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 26/28] sf: ops: Add static qualifier to spi_flash_cmd_bankaddr_write   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 27/28] sf: probe: Add support for MX25L25635F   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v3 28/28] sf: probe: Add support for MX25L51235F   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] git-mailrc: Update SPI custodian   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 00/36] sf: Add common probe and extended/quad read/write cmds support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 01/36] sf: Divide spi_flash into multiple parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 02/36] sf: probe: Add new spi_flash_probe support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 03/36] sf: probe: Add support for M25P* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 04/36] sf: probe: Add support for EN25Q* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 05/36] sf: probe: Add support for GD25* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 06/36] sf: probe: Add support for MX25L* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 07/36] sf: probe: Add support for W25* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4] sf: probe: Add support for S25FL* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 09/36] sf: probe: Add support for SST25* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 10/36] sf: probe: Add support for AT45DB* flash parts   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 11/36] sf: probe: Give proper spacing on flash table params   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 12/36] sf: probe: Add support for SST_WP   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 13/36] sf: probe: Add support to clear flash BP# bits   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 14/36] sf: probe: Add support for erase sector selection flag   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 15/36] sf: probe: Add support for flag status polling   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 16/36] sf: probe: Move BAR config to spi_flash_validate_ids   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 17/36] sf: Add proper comment style on spi_flash structure   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 18/36] sf: ramtron: Add support for separate flash driver   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 19/36] sf: Remove unneeded flash drivers files   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 20/36] sf: probe: Add support for EN25Q64   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 21/36] sf: probe: Add support for S25FL256S_256K   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 22/36] sf: probe: Add support for S25FL512S_256K   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 23/36] sf: probe: Use print_size arg as page_size   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 24/36] sf: probe: Print erase_size while printing flash details   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 25/36] sf: probe: Simply the BAR configuration logic   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 26/36] sf: ops: Add static qualifier to spi_flash_cmd_bankaddr_write   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 27/36] sf: probe: Add support for MX25L25635F   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 28/36] sf: probe: Add support for MX25L51235F   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 29/36] sf: Remove spi_flash_do_alloc references   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 30/36] doc: SPI: Add status.txt for tracking SPI subsys status   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 31/36] sf: Add extended read commands support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 32/36] sf: Add quad read/write commands support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 33/36] sf: ops: Add configuration register writing support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 34/36] sf: Set quad enable bit support   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 35/36] sf: spi_flash cleanups   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH v4 36/36] spi: spi cleanups   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH] buildman: Use env to pick the python from $PATH   Jagannadha Sutradharudu Teki
• [U-Boot] [PATCH 5/9] ARM: mx25: convert to common timer code   Benoît Thébaudeau
• [U-Boot] [PATCH 5/9] ARM: mx25: convert to common timer code   Benoît Thébaudeau
• [U-Boot] [PATCH] net: fec_mxc: Fix timeouts during tftp transfer   Benoît Thébaudeau
• [U-Boot] [PATCH] net: fec_mxc: Fix timeouts during tftp transfer   Benoît Thébaudeau
• [U-Boot] [PATCH 6/7] status_led: Add support for inverted LEDs   Benoît Thébaudeau
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Benoît Thébaudeau
• [U-Boot] [PATCH 6/7] status_led: Add support for inverted LEDs   Benoît Thébaudeau
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Benoît Thébaudeau
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Benoît Thébaudeau
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Benoît Thébaudeau
• [U-Boot] [PATCH] gpio: mxc_gpio: Fix gpio_get_value() when the GPIO is an output   Benoît Thébaudeau
• [U-Boot] SPL binary too large for OMAP4460 OCM   Michael Trimarchi
• [U-Boot] AES: Encryption of u-boot.img   Michael Trimarchi
• [U-Boot] [PATCH RESEND] gpio: spear_gpio: Fix gpio_set_value() implementation   Michael Trimarchi
• [U-Boot] [PATCH RESEND] gpio: spear_gpio: Fix gpio_set_value() implementation   Michael Trimarchi
• [U-Boot] [PATCH RESEND] gpio: spear_gpio: Fix gpio_set_value() implementation   Michael Trimarchi
• [U-Boot] i.MX6 based board does not work if watchdog support is enabled   Michael Trimarchi
• [U-Boot] *** [u-boot] Error 139 when config NAND relative setting   Hsin-Hsiang Tseng
• [U-Boot] [RFC PATCH 0/3] i.MX6 (DQ/DLS): consolidate mux and pad names   Tapani Utriainen
• [U-Boot] gpmi-nand driver and jffs2 support   Marek Vasut
• [U-Boot] gpmi-nand driver and jffs2 support   Marek Vasut
• [U-Boot] [PATCH] ums: Add "dev num" parameter. Check mmc device before do ums init.   Marek Vasut
• [U-Boot] [RFC PATCH 1/3] USB: gadget: add atmel usba udc driver   Marek Vasut
• [U-Boot] [RFC PATCH 3/3] ARM: atmel: add RNDIS gadget support   Marek Vasut
• [U-Boot] [RFC PATCH 1/3] USB: gadget: add atmel usba udc driver   Marek Vasut
• [U-Boot] [RFC PATCH 3/3] ARM: atmel: add RNDIS gadget support   Marek Vasut
• [U-Boot] [RFC PATCH 3/3] ARM: atmel: add RNDIS gadget support   Marek Vasut
• [U-Boot] [PATCH] ums: Add "dev num" parameter. Check mmc device before do ums init.   Marek Vasut
• [U-Boot] gpmi-nand driver and jffs2 support   Marek Vasut
• [U-Boot] [PATCH v2 6/7] config: arm: exynos5250: Define CONFIG_SYS_CACHELINE_SIZE   Marek Vasut
• [U-Boot] [PATCH v2 1/7] USB: xHCI: Add stack support for xHCI   Marek Vasut
• [U-Boot] [PATCH 3/5] USB: xHCI: Add header for readl/writel functions   Marek Vasut
• [U-Boot] gpmi-nand driver and jffs2 support   Marek Vasut
• [U-Boot] [PATCH] usb: gadget: Fix data aborts during USB ethernet boot   Marek Vasut
• [U-Boot] [PATCH] usb: gadget: Fix data aborts during USB ethernet boot   Marek Vasut
• [U-Boot] [PATCH v3] usb: gadget: Fix data aborts during USB ethernet boot   Marek Vasut
• [U-Boot] [PATCH v3] usb: gadget: Fix data aborts during USB ethernet boot   Marek Vasut
• [U-Boot] Failing USB devices   Marek Vasut
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH 0/1] m28evk board config   Marek Vasut
• [U-Boot] [PATCH 1/1] m28evk board config   Marek Vasut
• [U-Boot] [PATCH v2 0/3] USB: atmel: add atmel usba udc driver support   Marek Vasut
• [U-Boot] [PATCH v2 3/3] ARM: atmel: add RNDIS gadget support   Marek Vasut
• [U-Boot] [PATCH v2 2/3] ARM: atmel: correct UDPHS name   Marek Vasut
• [U-Boot] [PATCH v2 1/3] USB: gadget: add atmel usba udc driver   Marek Vasut
• [U-Boot] [PATCH 3/4] dfu: Find DFU alt setting number by passing its name   Marek Vasut
• [U-Boot] [PATCH 3/4] dfu: Find DFU alt setting number by passing its name   Marek Vasut
• [U-Boot] [PATCH 2/3] tools: mxsboot: Mark the FCB pages as valid   Marek Vasut
• [U-Boot] [PATCH 4/4] dfu: Extract common DFU code to handle "dfu_alt_info" environment variable   Marek Vasut
• [U-Boot] [PATCH 4/4] dfu: Extract common DFU code to handle "dfu_alt_info" environment variable   Marek Vasut
• [U-Boot] [PATCH 4/4] dfu: Extract common DFU code to handle "dfu_alt_info" environment variable   Marek Vasut
• [U-Boot] [PATCH v3 0/4] USB: atmel: add atmel usba udc driver support   Marek Vasut
• [U-Boot] [PATCH 4/4 v2] dfu: Extract common DFU code to handle "dfu_alt_info" environment variable   Marek Vasut
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH v3 0/3] dfu: ram support   Marek Vasut
• [U-Boot] [PATCH v3 1/3] dfu: unify mmc/nand read/write ops enum   Marek Vasut
• [U-Boot] [PATCH v3 2/3] dfu: ram support   Marek Vasut
• [U-Boot] [PATCH RFC] usb: Prevent using reserved registers on DM36x usb   Marek Vasut
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH v3 2/3] dfu: ram support   Marek Vasut
• [U-Boot] [PATCH] net: fec: Avoid MX28 bus sync issue   Marek Vasut
• [U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'   Marek Vasut
• [U-Boot] gpmi-nand driver and jffs2 support   Marek Vasut
• [U-Boot] gpmi-nand driver and jffs2 support   Marek Vasut
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH v4 0/3] dfu ram support   Marek Vasut
• [U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'   Marek Vasut
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH 2/3] tools: mxsboot: Mark the FCB pages as valid   Marek Vasut
• [U-Boot] [PATCH] doc: README.mxsimage: Use mkimage provided by U-boot   Marek Vasut
• [U-Boot] [PATCH v2] doc: README.mxs: Add instruction to install 'libssl-dev'   Marek Vasut
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH v3] doc: README.mxs: Add instruction to install 'libssl-dev'   Marek Vasut
• [U-Boot] [PATCH v2] doc: README.mxs: Add instruction to install 'libssl-dev'   Marek Vasut
• [U-Boot] [PATCH v2] doc: README.mxs: Add instruction to install 'libssl-dev'   Marek Vasut
• [U-Boot] [PATCH] net: fec_mxc: Fix timeouts during tftp transfer   Marek Vasut
• [U-Boot] [PATCH v3 01/10] usb: Move 'bmRequestType' USB device request macros from EHCI header   Marek Vasut
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Marek Vasut
• [U-Boot] [PATCH v3 01/10] usb: Move 'bmRequestType' USB device request macros from EHCI header   Marek Vasut
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Marek Vasut
• [U-Boot] [PATCH v5 0/3] dfu ram support   Marek Vasut
• [U-Boot] [PATCH v2] net: fec_mxc: Fix timeouts during tftp transfer   Marek Vasut
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] gpmi-nand driver and jffs2 support   Marek Vasut
• [U-Boot] gpmi-nand driver and jffs2 support   Marek Vasut
• [U-Boot] gpmi-nand driver and jffs2 support   Marek Vasut
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: Setup stack in JTAG mode   Marek Vasut
• [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT   Marek Vasut
• [U-Boot] [PATCH V4 02/17] usb: ehci-mx6: add support for host mode otg port   Marek Vasut
• [U-Boot] [PATCH V4 04/17] usb: gadget: ether: return error from rx_submit if no request   Marek Vasut
• [U-Boot] [PATCH V4 03/17] usb: gadget: ether set wMaxPacketSize   Marek Vasut
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Marek Vasut
• [U-Boot] [PATCH V4 10/17] usb: gadget: mv_udc: optimize bounce   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: Add PPC-AG BG0900 board   Marek Vasut
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Marek Vasut
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Marek Vasut
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Marek Vasut
• [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file   Marek Vasut
• [U-Boot] About patch "S3C24XX: Add support to MINI2416 board"   Marek Vasut
• [U-Boot] [PATCH 2/3] mx28evk: Propagate the error if cpu_eth_init() fails   Marek Vasut
• [U-Boot] [PATCH V4 10/17] usb: gadget: mv_udc: optimize bounce   Marek Vasut
• [U-Boot] [PATCH V4 03/17] usb: gadget: ether set wMaxPacketSize   Marek Vasut
• [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT   Marek Vasut
• [U-Boot] [PATCH v3 02/10] USB: xHCI: Add stack support for xHCI   Marek Vasut
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Marek Vasut
• [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT   Marek Vasut
• [U-Boot] [PATCH V4 03/17] usb: gadget: ether set wMaxPacketSize   Marek Vasut
• [U-Boot] [PATCH V4 10/17] usb: gadget: mv_udc: optimize bounce   Marek Vasut
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Marek Vasut
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Marek Vasut
• [U-Boot] [PATCH 1/3] usb:g_dnl:ums: Conditional compilation for mass storage function (f_mass_storage)   Marek Vasut
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH v2] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH v3] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH] USB: gadget: atmel: disconnect before unbind   Marek Vasut
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Marek Vasut
• [U-Boot] [PATCH v3] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH v3] ARM: mxs: tools: Use mkimage for BootStream generation   Marek Vasut
• [U-Boot] [PATCH V2] i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID   Marek Vasut
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Marek Vasut
• [U-Boot] MAKEALL build error on usb/master branch   Marek Vasut
• [U-Boot] [PATCH V5 00/18] Make mv_udc work for i.mx6   Marek Vasut
• [U-Boot] [PATCH 1/3] usb:g_dnl:ums: Conditional compilation for mass storage function (f_mass_storage)   Marek Vasut
• [U-Boot] [PATCH v3 00/10] USB: XHCI: Add xHCI host controller stack driver   Marek Vasut
• [U-Boot] [PATCH v2] usb: ehci: Fix test mode for connected ports   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH V5 02/18] usb: ehci-mx6: add support for host mode otg port   Marek Vasut
• [U-Boot] [PATCH V5 03/18] usb: echi-hcd: add usb_lowlevel_init_device   Marek Vasut
• [U-Boot] [PATCH V5 04/18] usb: gadget: ether set wMaxPacketSize   Marek Vasut
• [U-Boot] [PATCH V5 05/18] usb: gadget: ether: return error from rx_submit if no request   Marek Vasut
• [U-Boot] [PATCH V5 07/18] usb: udc: add udc.h include file   Marek Vasut
• [U-Boot] [PATCH V5 08/18] usb: gadget: mv_udc: fix typo in error message   Marek Vasut
• [U-Boot] [PATCH V5 09/18] usb: gadget: mv_udc: set is_dualspeed = 1   Marek Vasut
• [U-Boot] [PATCH V5 10/18] usb: gadget: mv_udc: fix full speed connections   Marek Vasut
• [U-Boot] [PATCH V5 12/18] usb: gadget: mv_udc: flush item before head   Marek Vasut
• [U-Boot] [PATCH V5 14/18] usb: gadget: mv_udc: zero transfer descriptor memory on probe   Marek Vasut
• [U-Boot] [PATCH V5 15/18] usb: gadget: mv_udc: clear desc upon ep_disable   Marek Vasut
• [U-Boot] [PATCH V5 00/18] Make mv_udc work for i.mx6   Marek Vasut
• [U-Boot] [PATCH RFC] usb: Prevent using reserved registers on DM36x usb   Marek Vasut
• [U-Boot] [PATCH V5 10/18] usb: gadget: mv_udc: fix full speed connections   Marek Vasut
• [U-Boot] [PATCH V5 03/18] usb: echi-hcd: add usb_lowlevel_init_device   Marek Vasut
• [U-Boot] [PATCH V5 02/18] usb: ehci-mx6: add support for host mode otg port   Marek Vasut
• [U-Boot] [PATCH V5 02/18] usb: ehci-mx6: add support for host mode otg port   Marek Vasut
• [U-Boot] [PATCH v2] usb: Prevent using reserved registers on DM36x usb   Marek Vasut
• [U-Boot] [PATCH] am33xx: Enable D-CACHE on !CONFIG_SYS_DCACHE_OFF   Lokesh Vutla
• [U-Boot] [RFC PATCH] armv7:omap4-common: Correct check of the SPL image size   Lokesh Vutla
• [U-Boot] [PATCH] ARM: OMAP4: Convert to ti_armv7_common.h   Lokesh Vutla
• [U-Boot] SPL binary too large for OMAP4460 OCM   Lokesh Vutla
• [U-Boot] [PATCH 1/3] arm/km: add support for km_kirkwood_128m16 board   Prafulla Wadaskar
• [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Stephen Warren
• [U-Boot] [PATCH] Tegra114: Fix PLLX M, N, P init settings   Stephen Warren
• [U-Boot] [PATCH v2 1/2] Tegra114: Fix PLLX M, N, P init settings   Stephen Warren
• [U-Boot] [PATCH v2 4/6] ARM: tegra: delete Tegra specific code from toplevel Makefile   Stephen Warren
• [U-Boot] [PATCH] Tegra114: Fix PLLX M, N, P init settings   Tom Warren
• [U-Boot] [PATCH] Tegra114: Fix PLLX M, N, P init settings   Tom Warren
• [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Tom Warren
• [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Tom Warren
• [U-Boot] [PATCH] Change maintainer for Avionic Design boards   Tom Warren
• [U-Boot] [PATCH v2 2/2] Tegra114: Do not program CPCON field for PLLX   Tom Warren
• [U-Boot] BUG: fastmap and u-boot's ubi write command   Richard Weinberger
• [U-Boot] BUG: fastmap and u-boot's ubi write command   Richard Weinberger
• [U-Boot] BUG: fastmap and u-boot's ubi write command   Richard Weinberger
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Julius Werner
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Julius Werner
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Julius Werner
• [U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports   Julius Werner
• [U-Boot] [PATCH v2] usb: ehci: Fix test mode for connected ports   Julius Werner
• [U-Boot] U-Boot 2009.11.1 USB Issue and Building U-Boot 2013.07   Chuck Wical
• [U-Boot] U-Boot 2009.11.1 USB Issue and Building U-Boot 2013.07   Chuck Wical
• [U-Boot] U-Boot 2009.11.1 USB Issue and Building U-Boot 2013.07   Chuck Wical
• [U-Boot] [PATCH V4 1/3] power:battery: add battery support for Trats2 board   Piotr Wilczek
• [U-Boot] [PATCH V5 0/3] Introduce Samsung's new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH V5 1/3] power:battery: add battery support for Trats2 board   Piotr Wilczek
• [U-Boot] [PATCH V5 2/3] samsung:common:i2c: add definions for third soft I2C adapter for Trats2 board   Piotr Wilczek
• [U-Boot] [PATCH V5 3/3] samsung: trats2: add support for new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH V6 0/3] Introduce Samsung's new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH V6 1/3] power:battery: add battery support for Trats2 board   Piotr Wilczek
• [U-Boot] [PATCH V6 2/3] samsung:common:i2c: add definions for third soft I2C adapter for Trats2 board   Piotr Wilczek
• [U-Boot] [PATCH V6 3/3] samsung: trats2: add support for new board Trats2   Piotr Wilczek
• [U-Boot] [PATCH V2] drivers:power:max77693: add support for new multi function pmic max77693   Piotr Wilczek
• [U-Boot] [PATCH] power:pmic: prevent data abort for pmic bat command   Piotr Wilczek
• [U-Boot] [PATCH] powerpc/p1010rdb-pb: add support for p1010rdb-pb board   Scott Wood
• [U-Boot] [PATCH] MTD: atmel_nand: support for software BCH ECC   Scott Wood
• [U-Boot] [PATCH] MTD: atmel_nand: support for software BCH ECC   Scott Wood
• [U-Boot] [PATCH v1 1/2] nand, davinci: add special UBL ecc position   Scott Wood
• [U-Boot] [PATCH v5 1/4] core support of arm64   Scott Wood
• [U-Boot] [PATCH v5 1/4] core support of arm64   Scott Wood
• [U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t   Scott Wood
• [U-Boot] [PATCH] mxs_nand: Fix ECC strength for NAND flash with OOB size of 224   Scott Wood
• [U-Boot] [PATCH v2 0/4] MTD & UBI fixes   Scott Wood
• [U-Boot] [PATCH] mxs_nand: Fix ECC strength for NAND flash with OOB size of 224   Scott Wood
• [U-Boot] [PATCH v5 1/4] core support of arm64   Scott Wood
• [U-Boot] [PATCH] powerpc/p1010rdb-pb: add support for p1010rdb-pb board   Scott Wood
• [U-Boot] [PATCH] powerpc/p1010rdb-pb: add support for p1010rdb-pb board   Scott Wood
• [U-Boot] [PATCH v2 0/4] MTD & UBI fixes   Scott Wood
• [U-Boot] [PATCH v7 1/5] core support of arm64   Scott Wood
• [U-Boot] powerpc SPL framework: Avoiding relocate_code   Scott Wood
• [U-Boot] [PATCH v4 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
• [U-Boot] powerpc SPL framework: Avoiding relocate_code   Scott Wood
• [U-Boot] [PATCH v4 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
• [U-Boot] [PATCH v4 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
• [U-Boot] [PATCH v10 1/6] core support of arm64   Scott Wood
• [U-Boot] [RFC 4/5] SPL:Defines function required to env read for IFC & env_nand   Scott Wood
• [U-Boot] [RFC 4/5] SPL:Defines function required to env read for IFC & env_nand   Scott Wood
• [U-Boot] [U-boot] OOB-Layout question in NAND Flash chip   Scott Wood
• [U-Boot] [U-boot]question: why write bbt and search bbt use different ops mode in nand_bbt.c in U-boot 2013.04?   Scott Wood
• [U-Boot] [PATCH 1/3] mtd:Increase ecc bytes to support 8K page size NAND   Scott Wood
• [U-Boot] [PATCH] powerpc/c29xpcie: add DDR ECC on off config setting   Scott Wood
• [U-Boot] [PATCH] powerpc/c29xpcie: add DDR ECC on off config setting   Scott Wood
• [U-Boot] [RFC 4/5] SPL:Defines function required to env read for IFC & env_nand   Scott Wood
• [U-Boot] [u-boot-release] [PATCH 3/3] board/c29xpcie: Add support of 8K page size NAND flash   Scott Wood
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Scott Wood
• [U-Boot] NAND crazy behavior - mtd->size changing without clear reason   Scott Wood
• [U-Boot] [PATCH v10 1/6] core support of arm64   Scott Wood
• [U-Boot] When to create a SoC directory for ARM   Scott Wood
• [U-Boot] NAND crazy behavior - mtd->size changing without clear reason   Scott Wood
• [U-Boot] When to create a SoC directory for ARM   Scott Wood
• [U-Boot] When to create a SoC directory for ARM   Scott Wood
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Scott Wood
• [U-Boot] [PATCH v10 1/6] core support of arm64   Scott Wood
• [U-Boot] When to create a SoC directory for ARM   Scott Wood
• [U-Boot] [PATCH 04/11] mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPL   Scott Wood
• [U-Boot] [PATCH 05/11] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL   Scott Wood
• [U-Boot] When to create a SoC directory for ARM   Scott Wood
• [U-Boot] When to create a SoC directory for ARM   Scott Wood
• [U-Boot] [PATCH 05/11] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL   Scott Wood
• [U-Boot] When to create a SoC directory for ARM   Scott Wood
• [U-Boot] When to create a SoC directory for ARM   Scott Wood
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Scott Wood
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Woodruff, Richard
• [U-Boot] [PATCH] powerpc/p2041: fix I2C controller's offset   Shaohui Xie
• [U-Boot] [PATCH v2 0/2] config.mk: Delete unnecessary code   Masahiro Yamada
• [U-Boot] [PATCH v2 1/2] config.mk: Delete unnecessary code   Masahiro Yamada
• [U-Boot] [PATCH v2 2/2] cam_enc_4xx: Move CONFIG_SPL_PAD_TO to a config header   Masahiro Yamada
• [U-Boot] [PATCH] config.mk: Delete unnecessary code   Masahiro Yamada
• [U-Boot] [PATCH] ARM: refactor compiler options in config.mk   Masahiro Yamada
• [U-Boot] [PATCH 00/19] First step towards Kbuild: Use Kbuild style makefiles   Masahiro Yamada
• [U-Boot] [PATCH 01/19] Makefile: prepare for using Kbuild-style Makefile   Masahiro Yamada
• [U-Boot] [PATCH 02/19] armv7: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 03/19] arm926ejs: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 04/19] arm920t: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 05/19] arm720t: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 06/19] ARM: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 07/19] ARM: imx-common: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 08/19] drivers: net: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 09/19] drivers: mtd: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 10/19] drivers: usb: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 11/19] drivers: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 12/19] fs: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 13/19] common: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 14/19] net: convert a makefile to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 15/19] lib: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 16/19] disk: convert a makefile to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 17/19] sandbox: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 18/19] powerpc: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 19/19] board: ti: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 0/6] Second step towards Kbuild: Descend down like Kbuild   Masahiro Yamada
• [U-Boot] [PATCH 1/6] Makefile: support descending down to subdirectories   Masahiro Yamada
• [U-Boot] [PATCH 2/6] drivers: move some drivers to drivers/Makefile   Masahiro Yamada
• [U-Boot] [PATCH 3/6] fs: move some file system to fs/Makefile   Masahiro Yamada
• [U-Boot] [PATCH 4/6] ARM: tegra: delete Tegra specific code from toplevel Makefile   Masahiro Yamada
• [U-Boot] [PATCH 5/6] ARM: omap: delete OMAP specific code from toplevel Makefile   Masahiro Yamada
• [U-Boot] [PATCH 6/6] ARM: s5pc, exynos: delete Samsung ARM SoC specific code from toplevel Makefile   Masahiro Yamada
• [U-Boot] [PATCH 00/19] First step towards Kbuild: Use Kbuild style makefiles   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: doc: uImage.FIT: fix typos   Masahiro Yamada
• [U-Boot] [PATCH 00/19] First step towards Kbuild: Use Kbuild style makefiles   Masahiro Yamada
• [U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS   Masahiro Yamada
• [U-Boot] [PATCH] cosmetic: FIT: fix typos in comments   Masahiro Yamada
• [U-Boot] [PATCH] FIT: delete unnecessary casts   Masahiro Yamada
• [U-Boot] [PATCH] Makefile: Do not show make debug messages   Masahiro Yamada
• [U-Boot] Annoying make debug messages at v2013.10-rc3   Masahiro Yamada
• [U-Boot] [PATCH v2] FIT: delete unnecessary casts   Masahiro Yamada
• [U-Boot] [PATCH] FIT: delete unnecessary casts   Masahiro Yamada
• [U-Boot] Annoying make debug messages at v2013.10-rc3   Masahiro Yamada
• [U-Boot] [PATCH 0/5] cleanup docs and remove remainders of dead board   Masahiro Yamada
• [U-Boot] [PATCH 1/5] cosmetic: doc: driver-model: Do not number driver lists   Masahiro Yamada
• [U-Boot] [PATCH 2/5] cosmetic: UDM-serial: clean up the remainders of dead driver   Masahiro Yamada
• [U-Boot] [PATCH 3/5] cosmetic: UDM-net: clean up the remainders of dead driver   Masahiro Yamada
• [U-Boot] [PATCH 4/5] ep93xx: remove remainders of dead board   Masahiro Yamada
• [U-Boot] [PATCH 5/5] net: ep93xx_eth: remove a dead driver.   Masahiro Yamada
• [U-Boot] [PATCH 4/5] ep93xx: remove remainders of dead board   Masahiro Yamada
• [U-Boot] [PATCH 5/5] net: ep93xx_eth: remove a dead driver.   Masahiro Yamada
• [U-Boot] [PATCH 0/5] cleanup docs and remove remainders of dead board   Masahiro Yamada
• [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Masahiro Yamada
• [U-Boot] [PATCH v2 00/19] First step towards Kbuild: Use Kbuild style makefiles   Masahiro Yamada
• [U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile   Masahiro Yamada
• [U-Boot] [PATCH v2 02/19] armv7: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 03/19] arm926ejs: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 04/19] arm920t: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 05/19] arm720t: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 06/19] ARM: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 07/19] ARM: imx-common: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 08/19] drivers: net: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 09/19] drivers: mtd: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 10/19] drivers: usb: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 11/19] drivers: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 12/19] fs: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 13/19] common: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 14/19] net: convert a makefile to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 15/19] lib: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 16/19] disk: convert a makefile to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 17/19] sandbox: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 18/19] powerpc: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH v2 19/19] board: ti: convert makefiles to Kbuild style   Masahiro Yamada
• [U-Boot] [PATCH 00/19] First step towards Kbuild: Use Kbuild style makefiles   Masahiro Yamada
• [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Masahiro Yamada
• [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Masahiro Yamada
• [U-Boot] [PATCH v2 0/6] Second step towards Kbuild: Descend down like Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v2 1/6] Makefile: support descending down to subdirectories   Masahiro Yamada
• [U-Boot] [PATCH v2 2/6] drivers: move some drivers to drivers/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v2 3/6] fs: move some file system to fs/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v2 4/6] ARM: tegra: delete Tegra specific code from toplevel Makefile   Masahiro Yamada
• [U-Boot] [PATCH v2 5/6] ARM: omap: delete OMAP specific code from toplevel Makefile   Masahiro Yamada
• [U-Boot] [PATCH v2 6/6] ARM: s5pc, exynos: delete Samsung ARM SoC specific code from toplevel Makefile   Masahiro Yamada
• [U-Boot] [PATCH 0/6] Second step towards Kbuild: Descend down like Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS   Masahiro Yamada
• [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Masahiro Yamada
• [U-Boot] [PATCH v3 0/6] Second step towards Kbuild: Descend down like Kbuild   Masahiro Yamada
• [U-Boot] [PATCH v3 1/6] Makefile: support descending down to subdirectories   Masahiro Yamada
• [U-Boot] [PATCH v3 2/6] drivers: move some drivers to drivers/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v3 3/6] fs: move some file system to fs/Makefile   Masahiro Yamada
• [U-Boot] [PATCH v3 4/6] ARM: tegra: move Tegra specific code under arch/arm/   Masahiro Yamada
• [U-Boot] [PATCH v3 5/6] ARM: omap: move OMAP specific code under arch/arm/   Masahiro Yamada
• [U-Boot] [PATCH v3 6/6] ARM: s5pc, exynos: move Samsung ARM SoC specific code under arch/arm/   Masahiro Yamada
• [U-Boot] [PATCH v2 4/6] ARM: tegra: delete Tegra specific code from toplevel Makefile   Masahiro Yamada
• [U-Boot] [PATCH 0/5] Add device tree support for VxWorks   Miao Yan
• [U-Boot] [PATCH 1/5] common/cmd_bootm.c: seperate do_bootm_vxworks related code from CONFIG_CMD_ELF.   Miao Yan
• [U-Boot] [PATCH 2/5] common/config_defaults.h: make CONFIG_BOOTM_VXWORKS default configuration   Miao Yan
• [U-Boot] [PATCH 3/5] common/cmd_bootm: extend do_bootm_vxworks to support the new VxWorks boot interface.   Miao Yan
• [U-Boot] [PATCH 4/5] common/fdt_support.c: avoid unintended return from fdt_fixup_memory_banks()   Miao Yan
• [U-Boot] [PATCH 5/5] doc/README.vxworks: add a document describing the new VxWorks boot interface   Miao Yan
• [U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks   Miao Yan
• [U-Boot] [PATCH v2 1/5] common/cmd_bootm.c: seperate do_bootm_vxworks related code from CONFIG_CMD_ELF.   Miao Yan
• [U-Boot] [PATCH v2 2/5] common/config_defaults.h: make CONFIG_BOOTM_VXWORKS default configuration   Miao Yan
• [U-Boot] [PATCH v2 3/5] common/cmd_bootm: extend do_bootm_vxworks to support the new VxWorks boot interface.   Miao Yan
• [U-Boot] [PATCH v2 4/5] common/fdt_support.c: avoid unintended return from fdt_fixup_memory_banks()   Miao Yan
• [U-Boot] [PATCH v2 5/5] doc/README.vxworks: add a document describing the new VxWorks boot interface   Miao Yan
• [U-Boot] [PATCH] mpc85xx: Fix the offset of register address error   Tang Yuantian
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v3] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH v4] usb: new board-specific USB init interface   Mateusz Zalega
• [U-Boot] [PATCH 00/10] arm: vf610/vf610twr: vybrid tower fixes and enhancements   Marcel Ziswiler
• [U-Boot] [PATCH 01/10] arm: vf610: fix anadig register struct   Marcel Ziswiler
• [U-Boot] [PATCH 02/10] arm: vf610: clean-up anadig register struct   Marcel Ziswiler
• [U-Boot] [PATCH 03/10] arm: vf610: add uart0 clock definition   Marcel Ziswiler
• [U-Boot] [PATCH 04/10] arm: vf610: add anadig pll5 definitions   Marcel Ziswiler
• [U-Boot] [PATCH 05/10] arm: vf610: add enet1 base address definition   Marcel Ziswiler
• [U-Boot] [PATCH 06/10] arm: vf610: add rmii clkout iomux definition   Marcel Ziswiler
• [U-Boot] [PATCH 07/10] arm: vf610: add uart0 tx/rx iomux definitions   Marcel Ziswiler
• [U-Boot] [PATCH 08/10] arm: vf610: add rmii1 iomux definitions   Marcel Ziswiler
• [U-Boot] [PATCH 09/10] arm: vf610: fix double iomux configuration for vf610twr board   Marcel Ziswiler
• [U-Boot] [PATCH 10/10] arm: vf610: remove obsolete uart port configuration   Marcel Ziswiler
• [U-Boot] [PATCH] arm: vf610: initial integration for colibri vf50   Marcel Ziswiler
• [U-Boot] [PATCH 01/10] arm: vf610: fix anadig register struct   Marcel Ziswiler
• [U-Boot] [PATCH 08/10] arm: vf610: add rmii1 iomux definitions   Marcel Ziswiler
• [U-Boot] [PATCH v2 00/10] arm: vf610/vf610twr: vybrid tower fixes and enhancements   Marcel Ziswiler
• [U-Boot] [PATCH v2 01/10] arm: vf610: fix anadig register struct   Marcel Ziswiler
• [U-Boot] [PATCH v2 02/10] arm: vf610: clean-up anadig register struct   Marcel Ziswiler
• [U-Boot] [PATCH v2 03/10] arm: vf610: add uart0 clock definition   Marcel Ziswiler
• [U-Boot] [PATCH v2 04/10] arm: vf610: add anadig pll5 definitions   Marcel Ziswiler
• [U-Boot] [PATCH v2 05/10] arm: vf610: add enet1 base address definition   Marcel Ziswiler
• [U-Boot] [PATCH v2 06/10] arm: vf610: add rmii clkout iomux definition   Marcel Ziswiler
• [U-Boot] [PATCH v2 07/10] arm: vf610: add uart0 tx/rx iomux definitions   Marcel Ziswiler
• [U-Boot] [PATCH v2 08/10] arm: vf610: add rmii1 iomux definitions   Marcel Ziswiler
• [U-Boot] [PATCH v2 09/10] arm: vf610: fix double iomux configuration for vf610twr board   Marcel Ziswiler
• [U-Boot] [PATCH v2 10/10] arm: vf610: remove obsolete uart port configuration   Marcel Ziswiler
• [U-Boot] [PATCH v2] arm: vf610: initial integration for colibri vf50   Marcel Ziswiler
• [U-Boot] U-Boot mini-summit at ELCE 2013 in Edinburgh - call for participation!   Detlev Zundel
• [U-Boot] U-Boot mini-summit at ELCE 2013 in Edinburgh - call for participation!   Detlev Zundel
• [U-Boot] uboot: PCI resource allocation   Sasikanth babu
• [U-Boot] SPL binary too large for OMAP4460 OCM   bin4ry
• [U-Boot] SPL binary too large for OMAP4460 OCM   bin4ry
• [U-Boot] SPL binary too large for OMAP4460 OCM   bin4ry
• [U-Boot] AES: Encryption of u-boot.img   bin4ry
• [U-Boot] AES: Encryption of u-boot.img   bin4ry
• [U-Boot] AES: Encryption of u-boot.img   bin4ry
• [U-Boot] [PATCH 0/1] m28evk board config   lothar at denx.de
• [U-Boot] [PATCH 1/1] m28evk board config   lothar at denx.de
• [U-Boot] [PATCH 0/1] m53evk board config   lothar at denx.de
• [U-Boot] [PATCH 1/1] m53evk board config   lothar at denx.de
• [U-Boot] [PATCH 1/1] m28evk board config   lothar at denx.de
• [U-Boot] [Exynos 5250 Query] Smp Boot   MJ embd
• [U-Boot] Understanding uboot child Makefiles   MJ embd
• [U-Boot] Understanding uboot child makefiles   MJ embd
• [U-Boot] [Exynos 5250 Query] Smp Boot   MJ embd
• [U-Boot] How do ARM platform initialize DDR?   MJ embd
• [U-Boot] How do ARM platform initialize DDR?   MJ embd
• [U-Boot] [PATCH] HACK: enable HYP mode on OMAP5   MJ embd
• [U-Boot] [RFC 0/5] powerpc: Add support 2 stage boot loader for corenet platform   MJ embd
• [U-Boot] [Exynos 5250 Query] Smp Boot   MJ embd
• [U-Boot] Understanding uboot child makefiles   MJ embd
• [U-Boot] [Exynos 5250 Query] Smp Boot   MJ embd
• [U-Boot] [PATCH 01/12 V3] EXYNOS5: Create a common board file   MJ embd
• [U-Boot] [PATCH] powerpc/mpc85xx: Fix the I2C bus speed error on p1022   Yuantian.Tang at freescale.com
• [U-Boot] [PATCH 1/3] SPL: P1022DS: switch to new multibus/multiadapter support   ying.zhang at freescale.com
• [U-Boot] [PATCH] SPL: P1022DS: switch to new multibus/multiadapter support   ying.zhang at freescale.com
• [U-Boot] [PATCH 1/3] powerpc: p1_p2_rdb_pc: Enable p1_p2_rdb_pc to boot from SD Card with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 2/3] powerpc : p1_p2_rdb_pc : Enable p1_p2_rdb_pc to start from eSPI with SPL   ying.zhang at freescale.com
• [U-Boot] [PATCH 3/3] powerpc: p1_p2_rdb_pc: add TPL for p1_p2_rdb_pc nand boot   ying.zhang at freescale.com
• [U-Boot] [PATCH 1/4] mkimage: added 'static' specifier to match function's prototype.   guilherme.maciel.ferreira at gmail.com
• [U-Boot] [PATCH 2/4] tools: moved code common to all image tools to a separated module.   guilherme.maciel.ferreira at gmail.com
• [U-Boot] [PATCH 3/4] dumpimage: Added a tool to extract "data files" from U-Boot multifile images   guilherme.maciel.ferreira at gmail.com
• [U-Boot] [PATCH 4/4] sandbox: dumpimage: Test dumpimage   guilherme.maciel.ferreira at gmail.com
• [U-Boot] [PATCH] powerpc/t4240: updated rcw_cfg to align with default hardware configuration   shh.xie at gmail.com
• [U-Boot] [PATCH] powerpc/tool/pbl: fix pbl image compiling process   shh.xie at gmail.com
• [U-Boot] [PATCH] powerpc/B4860: enable PBL tool for B4860   shh.xie at gmail.com
• [U-Boot] [PATCH 4/5] ep93xx: remove remainders of dead board   sergey kostanbaev
• [U-Boot] [PATCH 5/5] net: ep93xx_eth: remove a dead driver.   sergey kostanbaev
• [U-Boot] [PATCH v1 0/5]   thomas.langer at lantiq.com
• [U-Boot] [PATCH v4 00/36] sf: Add common probe and extended/quad read/write cmds support   thomas.langer at lantiq.com
• [U-Boot] [PATCH v4 31/36] sf: Add extended read commands support   thomas.langer at lantiq.com
• [U-Boot] [PATCH v4 31/36] sf: Add extended read commands support   thomas.langer at lantiq.com
• [U-Boot] [PATCH v4 31/36] sf: Add extended read commands support   thomas.langer at lantiq.com
• [U-Boot] [PATCH v4 00/36] sf: Add common probe and extended/quad read/write cmds support   thomas.langer at lantiq.com
• [U-Boot] [PATCH v4 31/36] sf: Add extended read commands support   thomas.langer at lantiq.com
• [U-Boot] [PATCH v4 31/36] sf: Add extended read commands support   thomas.langer at lantiq.com
• [U-Boot] [PATCH 0/5] Add device tree support for VxWorks   myan
• [U-Boot] [PATCH 0/5] Add device tree support for VxWorks   myan
• [U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks   myan
• [U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks   myan
• [U-Boot] [PATCH v6 0/5] arm64 patch   fenghua at phytium.com.cn
• [U-Boot] [PATCH v6 1/5] core support of arm64   fenghua at phytium.com.cn
• [U-Boot] [PATCH v6 2/5] board support of arm64   fenghua at phytium.com.cn
• [U-Boot] [PATCH v6 3/5] generic board patch of manual reloc and zero gd_t   fenghua at phytium.com.cn
• [U-Boot] [PATCH v6 4/5] 64bit initrd start address support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v6 5/5] remove compiling warnings   fenghua at phytium.com.cn
• [U-Boot] [PATCH v7 0/5] arm64 patch   fenghua at phytium.com.cn
• [U-Boot] [PATCH v7 1/5] core support of arm64   fenghua at phytium.com.cn
• [U-Boot] [PATCH v7 2/5] board support of vexpress_aemv8a   fenghua at phytium.com.cn
• [U-Boot] [PATCH v7 3/5] generic board patch of manual reloc and zero gd_t   fenghua at phytium.com.cn
• [U-Boot] [PATCH v7 4/5] 64bit initrd start address support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v7 5/5] remove compiling warnings   fenghua at phytium.com.cn
• [U-Boot] [PATCH v8 0/5] arm64 patch   fenghua at phytium.com.cn
• [U-Boot] [PATCH v8 1/5] core support of arm64   fenghua at phytium.com.cn
• [U-Boot] [PATCH v8 2/5] board support of vexpress_aemv8a   fenghua at phytium.com.cn
• [U-Boot] [PATCH v8 3/5] generic board patch of manual reloc and zero gd_t   fenghua at phytium.com.cn
• [U-Boot] [PATCH v8 4/5] 64bit initrd start address support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v8 5/5] remove compiling warnings   fenghua at phytium.com.cn
• [U-Boot] [PATCH v9 0/5] arm64 patch   fenghua at phytium.com.cn
• [U-Boot] [PATCH v9 1/5] core support of arm64   fenghua at phytium.com.cn
• [U-Boot] [PATCH v9 2/5] board support of vexpress_aemv8a   fenghua at phytium.com.cn
• [U-Boot] [PATCH v9 3/5] generic board patch of manual reloc and zero gd_t   fenghua at phytium.com.cn
• [U-Boot] [PATCH v9 4/5] 64bit initrd start address support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v9 5/5] remove compiling warnings   fenghua at phytium.com.cn
• [U-Boot] [PATCH v10 0/6] arm64 patch   fenghua at phytium.com.cn
• [U-Boot] [PATCH v10 1/6] core support of arm64   fenghua at phytium.com.cn
• [U-Boot] [PATCH v10 2/6] board support of vexpress_aemv8a   fenghua at phytium.com.cn
• [U-Boot] [PATCH v10 3/6] generic board patch of manual reloc and zero gd_t   fenghua at phytium.com.cn
• [U-Boot] [PATCH v10 4/6] 64bit initrd start address support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v10 5/6] remove compiling warnings   fenghua at phytium.com.cn
• [U-Boot] [PATCH v10 6/6] add weak entry definition   fenghua at phytium.com.cn
• [U-Boot] [PATCH v11 0/6] arm64 patch   fenghua at phytium.com.cn
• [U-Boot] [PATCH v11 1/6] core support of arm64   fenghua at phytium.com.cn
• [U-Boot] [PATCH v11 2/6] board support of vexpress_aemv8a   fenghua at phytium.com.cn
• [U-Boot] [PATCH v11 3/6] generic board patch of manual reloc and zero gd_t   fenghua at phytium.com.cn
• [U-Boot] [PATCH v11 4/6] 64bit initrd start address support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v11 5/6] remove compiling warnings   fenghua at phytium.com.cn
• [U-Boot] [PATCH v11 6/6] add weak entry definition   fenghua at phytium.com.cn
• [U-Boot] [PATCH v12 0/6] arm64 patch   fenghua at phytium.com.cn
• [U-Boot] [PATCH v12 1/6] core support of arm64   fenghua at phytium.com.cn
• [U-Boot] [PATCH v12 2/6] board support of vexpress_aemv8a   fenghua at phytium.com.cn
• [U-Boot] [PATCH v12 3/6] generic board patch of manual reloc and zero gd_t   fenghua at phytium.com.cn
• [U-Boot] [PATCH v12 4/6] 64bit initrd start address support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v12 5/6] remove compiling warnings   fenghua at phytium.com.cn
• [U-Boot] [PATCH v12 6/6] add weak entry definition   fenghua at phytium.com.cn
• [U-Boot] [PATCH v13 0/6] arm64 patch   fenghua at phytium.com.cn
• [U-Boot] [PATCH v13 1/6] core support of arm64   fenghua at phytium.com.cn
• [U-Boot] [PATCH v13 2/6] board support of vexpress_aemv8a   fenghua at phytium.com.cn
• [U-Boot] [PATCH v13 3/6] generic board patch of manual reloc and zero gd_t   fenghua at phytium.com.cn
• [U-Boot] [PATCH v13 4/6] 64bit initrd start address support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v13 5/6] remove compiling warnings   fenghua at phytium.com.cn
• [U-Boot] [PATCH v13 6/6] add weak entry definition   fenghua at phytium.com.cn
• [U-Boot] Dual boot Images in Flash   pshambhu
• [U-Boot] is it possible to map 2GB memory space to PCIe2 controller in u-boot for P1020 reference board   jdwang at qicetech.com
• [U-Boot] How can commit code to mailing list?   richie_wang
• [PATCH 3/3] This commit solve mmc_write_blocks with async cmd12 hidden bug   richie_wang
• [U-Boot] Patch about mmc and sdhci, Please look it, i can not pull the patch. I copy it here.   richie_wang
• [U-Boot] CONFIG_BAUDRATE doesn't match   txcotrader
• [U-Boot] Help with a PPCXXX port   txcotrader
• [U-Boot] [Uboot] Question about MMC driver   DongboZhang at viatech.com.cn
• [U-Boot] [Uboot] Question about MMC driver   DongboZhang at viatech.com.cn
• [U-Boot] [U-boot] IRQ_STACK_START alignment question   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] "-mno-unaligned-access" question   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] Some questions about BootStage functions   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   TigerLiu at viatech.com.cn
• [U-Boot] [PATCH] arm: prevent using movt/movw address loads   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] Some questions about BootStage functions   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] OOB-Layout question in NAND Flash chip   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] OOB-Layout question in NAND Flash chip   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot] OOB-Layout question in NAND Flash chip   TigerLiu at viatech.com.cn
• [U-Boot] [U-boot]question: why write bbt and search bbt use different ops mode in nand_bbt.c in U-boot 2013.04?   TigerLiu at viatech.com.cn
• [U-Boot] Not able to get the prints in the do_irq handler   TigerLiu at viatech.com.cn
• [U-Boot] P2041RDB fails to boot with master (and 2013.10-rc1)   sun york-R58495
• [U-Boot] P2041RDB fails to boot with master (and 2013.10-rc1)   sun york-R58495
• [U-Boot] [PATCH] powerpc/mpc8xxx: Fix CamelCase for DDR code   sun york-R58495
• [U-Boot] When to create a SoC directory for ARM   sun york-R58495
• [U-Boot] When to create a SoC directory for ARM   sun york-R58495