[U-Boot] [PATCH] Subject: [PATCH v.2] at91: add support for CDU9G25 board

[Jiří Prchal]

Hi Wolfgang,

Dne 9.9.2013 17:34, Wolfgang Denk napsal(a):
> Dear Jiri Prchal,
>
> In message <1378736524-30870-1-git-send-email-jiri.prchal at aksignal.cz> you wrote:
>> This patch adds support for our companies board CDU9G25 with Atmel AT91SAM9G25, 128MB DDR2, 256MB NAND.
>
> Please keep the line length of the commit message < 70 characters.
>
>> v.2
>> Fixed static IP and MAC addr cofiguration by random MAC and DHCP.
>> Added entry to MAINTAINERS.
>> Fixed line lenght, trailing spaces and other cosmetics.
>
> This comment does not belong into the commit message - please move it
> to the comment section, i. e. below the "---" line.
I'm not sure if I even should number versions of this patch?

>
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -939,6 +939,9 @@ Bo Shen <voice.shen at atmel.com>
>>   	at91sam9x5ek		ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
>>   	sama5d3xek		ARMV7 (SAMA5D31, D33, D34, D35 SoC)
>>
>> +Jiri Prchal <jiri.prchal at aksignal.cz>
>> +	cdu9g25			ARM926EJS (AT91SAM9G25 SoC)
>> +
>>   Rajeshwari Shinde <rajeshwari.s at samsung.com>
>
> Please keep the list sorted.
>
>
>> +#define CONFIG_BOOTARGS		"console=ttyS0,115200 ubi.mtd=root"\
>> +				"root=ubi0:root rootfstype=ubifs rw"\
>> +				"g_ether.dev_addr=02:04:25:aa:55:5e"\
>> +				"g_ether.host_addr=02:04:25:aa:55:5f"
This is here for linux connection with PC via USB ethernet gadget. I'd like static IP for this connection but if there 
is random MAC addr I must set up IP again and again. Is another solution for this?

>> +#define CONFIG_SERVERIP		10.0.1.1
Please help me with this:
I'd like to have board prepared for download images from TFTP server on address 10.0.1.1.
Is there other way how to do it? Even with MAC addr, I solved it with random MAC, is that OK? I keep in mind that would 
be nice read unique serial number from F-RAM (is on boart too) on SPI and use it as MAC addr. Will be this way better?

>
> We do not allow static network configuration in board config files!
> Please get rid of these MAC and IP addresses here.
>
> Best regards,
>
> Wolfgang Denk
>
With many thanks,
Jiri