[U-Boot] [PATCH] Subject: [PATCH v.2] at91: add support for CDU9G25 board

Andreas Bießmann andreas.devel at googlemail.com
Tue Sep 10 11:26:53 CEST 2013


Dear Jiří Prchal,

On 09/10/2013 09:58 AM, Jiří Prchal wrote:
> Dne 9.9.2013 17:34, Wolfgang Denk napsal(a):
>> In message <1378736524-30870-1-git-send-email-jiri.prchal at aksignal.cz>
>> you wrote:

<snip>

>>> +#define CONFIG_BOOTARGS        "console=ttyS0,115200 ubi.mtd=root"\
>>> +                "root=ubi0:root rootfstype=ubifs rw"\
>>> +                "g_ether.dev_addr=02:04:25:aa:55:5e"\
>>> +                "g_ether.host_addr=02:04:25:aa:55:5f"
> This is here for linux connection with PC via USB ethernet gadget. I'd
> like static IP for this connection but if there is random MAC addr I
> must set up IP again and again. Is another solution for this?

I have this in my /etc/network/interfaces on host:

---8<---
allow-hotplug usb0
iface usb0 inet static
	address 192.168.50.2
	netmask 255.255.255.0
	broadcast 192.168.50.255
	network 192.168.50.0
--->8---

And something other, hard coded in in embedded firmware config. This
works like a charm with changing MAC for usb gadget.

Best regards

Andreas Bießmann



More information about the U-Boot mailing list