[U-Boot] [PATCH 1/2] i2c: move to new subsystem
Philippe Reynes
tremyfr at yahoo.fr
Sun Sep 15 21:09:41 CEST 2013
Signed-off-by: Philippe Reynes <tremyfr at yahoo.fr>
---
README | 3 +
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/cpu/armv7/mx6/clock.c | 2 +-
arch/arm/imx-common/Makefile | 2 +-
drivers/i2c/Makefile | 2 +-
drivers/i2c/mxc_i2c.c | 109 ++++++++++++++++++---------------------
6 files changed, 57 insertions(+), 63 deletions(-)
diff --git a/README b/README
index 63706be..7c734ba 100644
--- a/README
+++ b/README
@@ -1995,6 +1995,9 @@ CBFS (Coreboot Filesystem) support
- CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0
- CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1
+ - drivers/i2c/i2c_mxc.c
+ - activate this driver with CONFIG_SYS_I2C_MXC
+
additional defines:
CONFIG_SYS_NUM_I2C_BUSES
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index 6bef254..fb3b128 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -94,7 +94,7 @@ void enable_usboh3_clk(bool enable)
MXC_CCM_CCGR2_USBOH3_60M(cg));
}
-#ifdef CONFIG_I2C_MXC
+#ifdef CONFIG_SYS_I2C_MXC
/* i2c_num can be from 0, to 1 for i.MX51 and 2 for i.MX53 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 7efb0d2..8130827 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -48,7 +48,7 @@ void enable_usboh3_clk(unsigned char enable)
}
-#ifdef CONFIG_I2C_MXC
+#ifdef CONFIG_SYS_I2C_MXC
/* i2c_num can be from 0 - 2 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 727a052..6c78dd9 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -16,7 +16,7 @@ COBJS-y = iomux-v3.o
endif
ifeq ($(SOC),$(filter $(SOC),mx5 mx6))
COBJS-y += timer.o cpu.o speed.o
-COBJS-$(CONFIG_I2C_MXC) += i2c-mxv7.o
+COBJS-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
endif
ifeq ($(SOC),$(filter $(SOC),mx6 mxs))
COBJS-y += misc.o
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 37ccbd1..f9fcebe 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -14,7 +14,7 @@ COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
COBJS-$(CONFIG_DW_I2C) += designware_i2c.o
COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
-COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
+COBJS-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
COBJS-$(CONFIG_I2C_MXS) += mxs_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 06ba4e3..3ac1865 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -153,21 +153,6 @@ static int bus_i2c_set_bus_speed(void *base, int speed)
return 0;
}
-/*
- * Get I2C Speed
- */
-static unsigned int bus_i2c_get_bus_speed(void *base)
-{
- struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
- u8 clk_idx = readb(&i2c_regs->ifdr);
- u8 clk_div;
-
- for (clk_div = 0; i2c_clk_div[clk_div][1] != clk_idx; clk_div++)
- ;
-
- return mxc_get_clock(MXC_I2C_CLK) / i2c_clk_div[clk_div][0];
-}
-
#define ST_BUS_IDLE (0 | (I2SR_IBB << 8))
#define ST_BUS_BUSY (I2SR_IBB | (I2SR_IBB << 8))
#define ST_IIF (I2SR_IIF | (I2SR_IIF << 8))
@@ -410,20 +395,30 @@ struct sram_data {
*/
static struct sram_data __attribute__((section(".data"))) srdata;
-void *get_base(void)
-{
-#ifdef CONFIG_SYS_I2C_BASE
-#ifdef CONFIG_I2C_MULTI_BUS
- void *ret = srdata.i2c_data[srdata.curr_i2c_bus].base;
- if (ret)
- return ret;
-#endif
- return (void *)CONFIG_SYS_I2C_BASE;
-#elif defined(CONFIG_I2C_MULTI_BUS)
- return srdata.i2c_data[srdata.curr_i2c_bus].base;
+static void * const i2c_bases[] = {
+#if defined(CONFIG_MX25)
+ (void *)IMX_I2C_BASE,
+ (void *)IMX_I2C2_BASE,
+ (void *)IMX_I2C3_BASE
+#elif defined(CONFIG_MX27)
+ (void *)IMX_I2C1_BASE,
+ (void *)IMX_I2C2_BASE
+#elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \
+ defined(CONFIG_MX51) || defined(CONFIG_MX53) || \
+ defined(CONFIG_MX6)
+ (void *)I2C1_BASE_ADDR,
+ (void *)I2C2_BASE_ADDR,
+ (void *)I2C3_BASE_ADDR
+#elif defined(CONFIG_VF610)
+ (void *)I2C0_BASE_ADDR
#else
- return srdata.i2c_data[0].base;
+#error "architecture not supported"
#endif
+};
+
+void *i2c_get_base(struct i2c_adapter *adap)
+{
+ return i2c_bases[adap->hwadapnr];
}
static struct i2c_parms *i2c_get_parms(void *base)
@@ -448,39 +443,26 @@ static int i2c_idle_bus(void *base)
return 0;
}
-#ifdef CONFIG_I2C_MULTI_BUS
-unsigned int i2c_get_bus_num(void)
+int mxc_i2c_read(struct i2c_adapter *adap, uint8_t chip,
+ uint addr, int alen, uint8_t *buffer,
+ int len)
{
- return srdata.curr_i2c_bus;
+ return bus_i2c_read(i2c_get_base(adap), chip, addr, alen, buffer, len);
}
-int i2c_set_bus_num(unsigned bus_idx)
-{
- if (bus_idx >= ARRAY_SIZE(srdata.i2c_data))
- return -1;
- if (!srdata.i2c_data[bus_idx].base)
- return -1;
- srdata.curr_i2c_bus = bus_idx;
- return 0;
-}
-#endif
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+int mxc_i2c_write(struct i2c_adapter *adap, uint8_t chip,
+ uint addr, int alen, uint8_t *buffer,
+ int len)
{
- return bus_i2c_read(get_base(), chip, addr, alen, buf, len);
-}
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- return bus_i2c_write(get_base(), chip, addr, alen, buf, len);
+ return bus_i2c_write(i2c_get_base(adap), chip, addr, alen, buffer, len);
}
/*
* Test if a chip at a given address responds (probe the chip)
*/
-int i2c_probe(uchar chip)
+int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
{
- return bus_i2c_write(get_base(), chip, 0, 0, NULL, 0);
+ return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0);
}
void bus_i2c_init(void *base, int speed, int unused,
@@ -510,23 +492,32 @@ void bus_i2c_init(void *base, int speed, int unused,
/*
* Init I2C Bus
*/
-void i2c_init(int speed, int unused)
+void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
{
- bus_i2c_init(get_base(), speed, unused, NULL, NULL);
+ bus_i2c_init(i2c_get_base(adap), speed, slaveaddr, NULL, NULL);
}
/*
* Set I2C Speed
*/
-int i2c_set_bus_speed(unsigned int speed)
+uint mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
{
- return bus_i2c_set_bus_speed(get_base(), speed);
+ return bus_i2c_set_bus_speed(i2c_get_base(adap), speed);
}
/*
- * Get I2C Speed
+ * Register mxc i2c adapters
*/
-unsigned int i2c_get_bus_speed(void)
-{
- return bus_i2c_get_bus_speed(get_base());
-}
+U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe,
+ mxc_i2c_read, mxc_i2c_write,
+ mxc_i2c_set_bus_speed, 100000, 0, 0)
+U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
+ mxc_i2c_read, mxc_i2c_write,
+ mxc_i2c_set_bus_speed, 100000, 0, 1)
+#if defined(CONFIG_MX31) || defined(CONFIG_MX35) ||\
+ defined(CONFIG_MX51) || defined(CONFIG_MX53) ||\
+ defined(CONFIG_MX6)
+U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
+ mxc_i2c_read, mxc_i2c_write,
+ mxc_i2c_set_bus_speed, 100000, 0, 2)
+#endif
--
1.7.4.4
More information about the U-Boot
mailing list