[U-Boot] [PATCH 2/2] SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode

[York Sun]

On 09/03/2013 07:11 PM, Zhao Qiang wrote:
> Fix PHY addresses for QSGMII Riser Card working in
> SGMII mode on board P3041/P5020/P4080/P5040/B4860.
> 
> QSGMII Riser Card can work in SGMII mode, but
> having the different PHY addresses.
> So the following steps should be done:
> 	1. Confirm whether QSGMII Riser Card is used.
> 	2. If yes, set the proper PHY address.
> Generally, the function is_qsgmii_riser_card() is
> for step 1, and set_sgmii_phy() for step 2.
> 
> However, there are still some special situations,
> take P5040 and B4860 as examples, the PHY addresses
> need to be changed when serdes protocol is changed,
> so it is necessary to confirm the protocol before
> setting PHY addresses.
> 
> Signed-off-by: Zhao Qiang <B45475 at freescale.com>
> ---

Applied to u-boot-mpc85xx/next, pending merging to u-boot-mpc85xx/master
branch.

York