[U-Boot] [PATCH v4 3/3] i2c: update config using mxc driver to new subsystem
Philippe Reynes
tremyfr at yahoo.fr
Sat Sep 21 18:13:36 CEST 2013
Signed-off-by: Philippe Reynes <tremyfr at yahoo.fr>
---
include/configs/apf27.h | 11 ++++++-----
include/configs/flea3.h | 9 ++++-----
include/configs/imx31_phycore.h | 7 +++----
include/configs/m53evk.h | 7 +++----
include/configs/mx25pdk.h | 7 +++----
include/configs/mx35pdk.h | 7 +++----
include/configs/mx53ard.h | 7 +++----
include/configs/mx53evk.h | 7 +++----
include/configs/mx53loco.h | 7 +++----
include/configs/mx53smd.h | 7 +++----
include/configs/mx6qsabreauto.h | 4 ++--
include/configs/nitrogen6x.h | 4 ++--
include/configs/titanium.h | 4 ++--
include/configs/vf610twr.h | 7 +++----
include/configs/woodburn_common.h | 7 +++----
15 files changed, 46 insertions(+), 56 deletions(-)
diff --git a/include/configs/apf27.h b/include/configs/apf27.h
index e7e258f..1193013 100644
--- a/include/configs/apf27.h
+++ b/include/configs/apf27.h
@@ -321,11 +321,12 @@
*/
#ifdef CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE IMX_I2C1_BASE
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */
+#define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F
+#define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */
+#define CONFIG_SYS_MXC_I2C2_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES { }
#ifdef CONFIG_CMD_EEPROM
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index cfcaf1b..a330d39 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -50,11 +50,10 @@
/*
* Hardware drivers
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C3_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */
+#define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 720e1bf..db43f19 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -35,11 +35,10 @@
* Hardware drivers
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
#define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index ccb07e3..1fd8b72 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -161,10 +161,9 @@
* I2C
*/
#ifdef CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
#endif
/*
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 543c415..256b3c1 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -111,10 +111,9 @@
/* I2C Configs */
#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE IMX_I2C_BASE
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
/* RTC */
#define CONFIG_RTC_IMXDI
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 68b225a..8966581 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -41,10 +41,9 @@
/*
* Hardware drivers
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C1_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 122ffd0..f0cc483 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -44,10 +44,9 @@
/* I2C Configs */
#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
/* MMC Configs */
#define CONFIG_FSL_ESDHC
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index d39ce7b..2beb433 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -37,10 +37,9 @@
/* I2C Configs */
#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
/* PMIC Configs */
#define CONFIG_POWER
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 7237da5..a936fb4 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -71,10 +71,9 @@
#define CONFIG_MXC_USB_FLAGS 0
/* I2C Configs */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C1_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
/* PMIC Controller */
#define CONFIG_POWER
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 7e4e1c9..72c21f9 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -34,10 +34,9 @@
/* I2C Configs */
#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
/* MMC Configs */
#define CONFIG_FSL_ESDHC
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index 5530fc6..e0200c7 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -36,8 +36,8 @@
/* I2C Configs */
#define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
#endif /* __MX6QSABREAUTO_CONFIG_H */
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 3454b86..d515e49 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -52,8 +52,8 @@
/* I2C Configs */
#define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
/* OCOTP Configs */
diff --git a/include/configs/titanium.h b/include/configs/titanium.h
index 077e25e..0769f07 100644
--- a/include/configs/titanium.h
+++ b/include/configs/titanium.h
@@ -41,8 +41,8 @@
/* I2C Configs */
#define CONFIG_CMD_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
/* MMC Configs */
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 5a7a066..34861f6 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -70,10 +70,9 @@
/* I2C Configs */
#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C0_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 0
#define CONFIG_BOOTDELAY 3
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 6b7e81f..24f331a 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -45,10 +45,9 @@
/*
* Hardware drivers
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE I2C1_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_SPD_BUS_NUM 0
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO
--
1.7.4.4
More information about the U-Boot
mailing list