[U-Boot] [PATCH] arm: zynq: Fix timer loadaddress

[Albert ARIBAUD]

Hi Michal,

On Wed, 28 Aug 2013 07:36:31 +0200, Michal Simek
<michal.simek at xilinx.com> wrote:

> Reload address was written to the counter register
> instead of load register.
> The problem happens when timer expires but never
> reload to ~0UL (it is downcount timer).
> 
> Reported-by: Stephen MacMahon <stephenm at xilinx.com>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> 
> ---
>  arch/arm/cpu/armv7/zynq/timer.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c
> index 0133565..3b8d949 100644
> --- a/arch/arm/cpu/armv7/zynq/timer.c
> +++ b/arch/arm/cpu/armv7/zynq/timer.c
> @@ -57,7 +57,7 @@ int timer_init(void)
>  			SCUTIMER_CONTROL_ENABLE_MASK;
> 
>  	/* Load the timer counter register */
> -	writel(0xFFFFFFFF, &timer_base->counter);
> +	writel(0xFFFFFFFF, &timer_base->load);
> 
>  	/*
>  	 * Start the A9Timer device
> --
> 1.8.2.3
> 

Applied bugfix to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.