[U-Boot] [PATCH 1/3] SPL: P1022DS: switch to new multibus/multiadapter support
ying.zhang at freescale.com
ying.zhang at freescale.com
Wed Sep 4 11:03:45 CEST 2013
From: Ying Zhang <b40530 at freescale.com>
- Added section "u_boot_list" in arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
- Use the function i2c_init_all instead of i2c_init
Signed-off-by: Ying Zhang <b40530 at freescale.com>
---
arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 5 +++++
board/freescale/p1022ds/spl.c | 6 +++++-
2 files changed, 10 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index 85ec74b..bc13267 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -44,6 +44,11 @@ SECTIONS
}
_edata = .;
+ . = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c
index b9dbf81..7f151e3 100644
--- a/board/freescale/p1022ds/spl.c
+++ b/board/freescale/p1022ds/spl.c
@@ -102,7 +102,11 @@ void board_init_r(gd_t *gd, ulong dest_addr)
env_relocate();
#endif
- i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C
+ i2c_init_all();
+#else
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
gd->ram_size = initdram(0);
#ifdef CONFIG_SPL_NAND_BOOT
--
1.7.0.4
More information about the U-Boot
mailing list