[U-Boot] Pull request: u-boot-arm/master

Tom Rini trini at ti.com
Mon Sep 9 16:56:38 CEST 2013


On Sat, Sep 07, 2013 at 12:55:38AM +0200, Albert ARIBAUD wrote:

> Hello Tom,
> 
> The following changes since commit
> fb18fa95a14ae875ef0a5421cd9fecc00c7c3a4c:
> 
>   Prepare v2013.10-rc2 (2013-09-02 14:20:36 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-arm master
> 
> for you to fetch changes up to 68e1747f9c0506159e8ecc9a4feb58e9c65a7b39:
> 
>   socfpga: Creating driver for Reset Manager (2013-09-06 12:09:06 +0200)
> 
> ----------------------------------------------------------------
> Albert ARIBAUD (7):
>       arm: omap3: fix SRAM copy and execution sequence
>       Merge 'u-boot-microblaze/zynq' into (u-boot-arm/master'
>       Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
>       Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
>       Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
>       Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
>       Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'
> 
> Amaury Pouly (1):
>       mmc: mxsmmc: Enable MMC HC support
> 
> Andreas Wass (2):
>       ARM: mxs: Added application UART driver
>       ARM: mxs: Add mx28evk_auart_console target
> 
> Bo Shen (11):
>       net: macb: fix the following building warning
>       arm: atmel: add gmac support for sama5d3xek board
>       arm: atmel: add nand trimffs subcommand for at91sam9n12 and
> at91sam9x5 arm: sama5d3: fix smc cs related registers offset
>       arm: sama5d3: remove unused define
>       arm: atmel: sama5d3: fix typo error for CONFIG_ENV_IS_NOWHERE
>       arm: atmel: remove the config.mk file
>       gpio: atmel: fix code to use pointer for pio port
>       gpio: atmel: add gpio common API support
>       gpio: atmel: add copyright and remove error header info
>       ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTI
> 
> Chin Liang See (2):
>       socfpga: Adding configuration for development kit
>       socfpga: Creating driver for Reset Manager
> 
> Eric Nelson (6):
>       i.MX6: nitrogen6x: force HDMI onto IPU0/DI0
>       fec_mxc: set ethaddr if fuses burned and not previously set
>       i.MX6: Add convenience macros cpu_type(rev) and is_cpu_type(cpu)
>       i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register
> declarations i.MX6: nitrogen6x: Don't bother setting PLL3(480) PFD1
> divisor i.MX6: Set and clear the gating bits for Phase Fractional
> Dividers
> 
> Hector Palacios (1):
>       ARM: mxs: rename function that sets AUTO_RESTART flag
> 
> Heiko Schocher (6):
>       arm, am33xx: add defines for gmii_sel_register bits
>       arm, am335x: add some missing registers and defines for lcd and
> epwm support arm, spl: add watchdog library to SPL
>       arm, am335x: add watchdog support
>       video: add formike lcd panel init
>       arm, am335x: add support for 3 siemens boards
> 
> Javier Martinez Canillas (1):
>       ARM: igep00x0.h: Enable raw initrd support
> 
> Jens Scharsig (BuS Elektronik) (1):
>       arm: atmel: cpux9k2: board update and enhancement
> 
> Lubomir Popov (1):
>       ARM: OMAP4470: Add Elpida EDB8164B3PF memory configuration
> 
> Marek Vasut (3):
>       ARM: mxs: tools: Add mkimage support for MXS bootstream
>       tools: Sort lists of files in Makefile
>       tools: mxsboot: Staticize functions
> 
> Michal Simek (4):
>       zynq: Add new ddrc driver for ECC support
>       zynq: slcr: Wait 100ms till clk is properly setup
>       zynq: Enable axi ethernet and emaclite driver initialization
>       arm: lds: Remove libgcc eabi exception handling tables
> 
> Oleksandr Tyshchenko (1):
>       sdp4430: Initialize board id using CONFIG_MACH_TYPE
> 
> SARTRE Leo (1):
>       ARM: Congatec: README update
> 
> Stefano Babic (7):
>       tools: imx_header should not include flash_offset
>       tools: rename mximage_flash_offset to imximage_ivt_offset
>       tools: dynamically allocate imx_header in imximage
>       tools: add variable padding of data image in mkimage
>       tools: add padding of data image file for imximage
>       tools: add support for setting the CSF into imximage
>       imx: add status reporting for HAB status
> 
> Stephen Warren (1):
>       ARM: tegra: support raw ramdisks
> 
> Taras Kondratiuk (3):
>       ARM: OMAP4470: Add OMAP4470 identification
>       ARM: OMAP4470: Add voltage and dpll data
>       ARM: OMAP4460: sdp: Limit TPS mux config to 4460
> 
> Thierry Reding (2):
>       ARM: tegra: Make cache line size SoC specific
>       ARM: tegra: Enable data cache on Dalmore
> 
> Tom Rini (13):
>       am33xx: Correct and expand comments on CONFIG_SPL_MAX_SIZE
>       TI:armv7: Move CONFIG_SPL_LIBDISK_SUPPORT to MMC section
>       omap5: Expand CONFIG_SPL_MAX_SIZE and comment upon
> SRAM_SCRATCH_SPACE_ADDR TI:am335x: Better comment and organize the
> networking related options am335x_evm: Add comment by SPL SPI support
>       am335x_evm: Regroup USB options
>       TI:armv7: Re-order slightly the generic CONFIG options, expand
> related comments am335x_evm: Update README for customization
>       TI:am33xx: Move SPL YMODEM support to the per-board config
>       TI:omap5: Clarify comments about SPL and DDR timings in common
> config omap5_uevm: Better comment why we have TCA642X and the reset time
>       dra7xx_evm: Re-order and comment the networking related config
> options siemens-am33x-common.h: Always build CONFIG_OMAP_GPIO support
> 
> Wu, Josh (6):
>       ARM: at91: atmel_nand: pmecc driver will select the galois table
> by sector size ARM: at91: sama5d3: remove unused definition about PMECC
> alpha table offset linux/compat.h: move dev_err, dev_info and dev_dbg
> from usb driver to compat.h mtd: atmel_nand: alloc memory instead of
> use static array for pmecc data ARM: at91: atmel_nand: add code to
> check the ONFI parameter ECC requirement mtd: atmel_nand: pmecc: fix
> bug fail to correct bit error in 1024-bytes sector
> 
>  MAINTAINERS                                        |    5 +
>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg       |    6 +
>  arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg       |    8 +
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |    9 +-
>  arch/arm/cpu/armv7/at91/sama5d3_devices.c          |   24 ++
>  arch/arm/cpu/armv7/mx6/Makefile                    |    7 +-
>  arch/arm/cpu/armv7/mx6/hab.c                       |  104 ++++++
>  arch/arm/cpu/armv7/mx6/soc.c                       |   28 ++
>  arch/arm/cpu/armv7/omap3/clock.c                   |    6 +-
>  arch/arm/cpu/armv7/omap3/lowlevel_init.S           |    8 +-
>  arch/arm/cpu/armv7/omap4/hw_data.c                 |   36 ++
>  arch/arm/cpu/armv7/omap4/hwinit.c                  |    3 +
>  arch/arm/cpu/armv7/omap4/sdram_elpida.c            |   41 ++-
>  arch/arm/cpu/armv7/socfpga/Makefile                |    2 +-
>  arch/arm/cpu/armv7/socfpga/misc.c                  |   27 --
>  arch/arm/cpu/armv7/socfpga/reset_manager.c         |   39 +++
>  arch/arm/cpu/armv7/zynq/Makefile                   |    1 +
>  arch/arm/cpu/armv7/zynq/ddrc.c                     |   50 +++
>  arch/arm/cpu/armv7/zynq/slcr.c                     |    2 +-
>  arch/arm/cpu/u-boot.lds                            |    2 +
>  arch/arm/include/asm/arch-am33xx/cpu.h             |   74 ++++-
>  arch/arm/include/asm/arch-am33xx/hardware_am33xx.h |    7 +
>  arch/arm/include/asm/arch-am33xx/omap.h            |    2 +-
>  arch/arm/include/asm/arch-at91/at91_common.h       |    1 +
>  arch/arm/include/asm/arch-at91/at91sam9x5.h        |    6 +
>  arch/arm/include/asm/arch-at91/sama5d3.h           |    2 -
>  arch/arm/include/asm/arch-at91/sama5d3_smc.h       |    2 +-
>  arch/arm/include/asm/arch-mx6/hab.h                |   67 ++++
>  arch/arm/include/asm/arch-mx6/imx-regs.h           |   37 +--
>  arch/arm/include/asm/arch-mx6/sys_proto.h          |    7 +
>  arch/arm/include/asm/arch-mxs/regs-uartapp.h       |  220 +++++++++++++
>  arch/arm/include/asm/arch-omap3/clock.h            |    2 -
>  arch/arm/include/asm/arch-omap4/clock.h            |    7 +-
>  arch/arm/include/asm/arch-omap4/omap.h             |    1 +
>  arch/arm/include/asm/arch-omap5/omap.h             |   11 +-
>  arch/arm/include/asm/arch-socfpga/reset_manager.h  |   10 +-
>  arch/arm/include/asm/arch-zynq/hardware.h          |    8 +
>  arch/arm/include/asm/arch-zynq/sys_proto.h         |    1 +
>  arch/arm/include/asm/omap_common.h                 |    1 +
>  board/atmel/at91sam9m10g45ek/config.mk             |    1 -
>  board/atmel/at91sam9x5ek/config.mk                 |    1 -
>  board/atmel/sama5d3xek/sama5d3xek.c                |   20 ++
>  board/boundary/nitrogen6x/nitrogen6x.c             |    8 +-
>  board/congatec/cgtqmx6eval/README                  |    3 +-
>  board/isee/igep0033/board.c                        |    6 +-
>  board/phytec/pcm051/board.c                        |    2 -
>  board/siemens/common/board.c                       |  171 ++++++++++
>  board/siemens/common/factoryset.c                  |  284
>  ++++++++++++++++ board/siemens/common/factoryset.h
>  |   27 ++ board/siemens/dxr2/Makefile                        |   49 +++
>  board/siemens/dxr2/board.c                         |  241
>  ++++++++++++++ board/siemens/dxr2/board.h                         |
>  69 ++++ board/siemens/dxr2/mux.c                           |  112
>  +++++++ board/siemens/pxm2/Makefile                        |   49 +++
>  board/siemens/pxm2/board.c                         |  429
>  ++++++++++++++++++++++++
>  board/siemens/pxm2/board.h                         |   22 ++
>  board/siemens/pxm2/mux.c                           |  186 +++++++++++
>  board/siemens/pxm2/pmic.h                          |   71 ++++
>  board/siemens/rut/Makefile                         |   49 +++
>  board/siemens/rut/board.c                          |  432
>  ++++++++++++++++++++++++
>  board/siemens/rut/board.h                          |   22 ++
>  board/siemens/rut/mux.c                            |  347
>  ++++++++++++++++++++
>  board/ti/am335x/README                             |   28 +-
>  board/ti/am335x/board.c                            |    6 +-
>  board/ti/sdp4430/sdp.c                             |    4 +-
>  board/xilinx/zynq/board.c                          |   19 ++
>  boards.cfg                                         |    4 +
>  common/image.c                                     |    1 +
>  config.mk                                          |    9 +
>  doc/README.SPL                                     |    2 +-
>  doc/README.atmel_pmecc                             |   14 -
>  doc/README.imximage                                |   30 +-
>  doc/README.mxc_hab                                 |   48 +++
>  doc/README.mxsimage                                |  165 ++++++++++
>  drivers/gpio/at91_gpio.c                           |  295
>  ++++++++++------- drivers/mmc/mxsmmc.c
>  |    3 +- drivers/mtd/nand/atmel_nand.c                      |  201
>  +++++++++++- drivers/net/fec_mxc.c                              |    2
>  + drivers/net/macb.c                                 |   12 +-
>  drivers/serial/Makefile                            |    1 +
>  drivers/serial/mxs_auart.c                         |  151 +++++++++
>  drivers/serial/serial.c                            |    2 +
>  drivers/usb/musb-new/linux-compat.h                |   16 -
>  drivers/video/Makefile                             |    1 +
>  drivers/video/formike.c                            |  511
>  +++++++++++++++++++++++++++++
>  drivers/watchdog/Makefile                          |    1 +
>  drivers/watchdog/omap_wdt.c                        |  121 +++++++
>  include/configs/am335x_evm.h                       |   93 +++---
>  include/configs/at91sam9m10g45ek.h                 |    2 +
>  include/configs/at91sam9n12ek.h                    |    3 +
>  include/configs/at91sam9x5ek.h                     |    5 +-
>  include/configs/dalmore.h                          |    3 -
>  include/configs/dra7xx_evm.h                       |   18 +-
>  include/configs/dxr2.h                             |   94 ++++++
>  include/configs/eb_cpux9k2.h                       |   62 ++--
>  include/configs/igep00x0.h                         |    1 +
>  include/configs/mxs.h                              |    7 +-
>  include/configs/omap4_sdp4430.h                    |    1 +
>  include/configs/omap5_common.h                     |   19 +-
>  include/configs/omap5_uevm.h                       |    3 +
>  include/configs/pxm2.h                             |  153 +++++++++
>  include/configs/rut.h                              |  156 +++++++++
>  include/configs/sama5d3xek.h                       |   11 +-
>  include/configs/siemens-am33x-common.h             |  461
>  ++++++++++++++++++++++++++
>  include/configs/socfpga_cyclone5.h                 |   28 +-
>  include/configs/tegra-common.h                     |    3 +-
>  include/configs/tegra114-common.h                  |    3 +
>  include/configs/tegra20-common.h                   |    3 +
>  include/configs/tegra30-common.h                   |    3 +
>  include/configs/ti_am335x_common.h                 |   22 +-
>  include/configs/ti_armv7_common.h                  |   26 +-
>  include/image.h                                    |    1 +
>  include/linux/compat.h                             |    8 +
>  include/video.h                                    |    4 +
>  spl/Makefile                                       |    1 +
>  tools/Makefile                                     |   42 +--
>  tools/imximage.c                                   |  180 +++++++++-
>  tools/imximage.h                                   |   20 +-
>  tools/logos/siemens.bmp                            |  Bin 0 -> 25766
>  bytes tools/mkimage.c                                    |   26 +-
>  tools/mkimage.h                                    |    6 +-
>  tools/mxsboot.c                                    |   12 +-
>  tools/mxsimage.c                                   | 2347
>  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tools/mxsimage.h                                   |  230
>  +++++++++++++ 124 files changed, 8726 insertions(+), 453 deletions(-)
>  create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg create
>  mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg create mode
>  100644 arch/arm/cpu/armv7/mx6/hab.c create mode 100644
>  arch/arm/cpu/armv7/socfpga/reset_manager.c create mode 100644
>  arch/arm/cpu/armv7/zynq/ddrc.c create mode 100644
>  arch/arm/include/asm/arch-mx6/hab.h create mode 100644
>  arch/arm/include/asm/arch-mxs/regs-uartapp.h delete mode 100644
>  board/atmel/at91sam9m10g45ek/config.mk delete mode 100644
>  board/atmel/at91sam9x5ek/config.mk create mode 100644
>  board/siemens/common/board.c create mode 100644
>  board/siemens/common/factoryset.c create mode 100644
>  board/siemens/common/factoryset.h create mode 100644
>  board/siemens/dxr2/Makefile create mode 100644
>  board/siemens/dxr2/board.c create mode 100644
>  board/siemens/dxr2/board.h create mode 100644 board/siemens/dxr2/mux.c
>  create mode 100644 board/siemens/pxm2/Makefile create mode 100644
>  board/siemens/pxm2/board.c create mode 100644
>  board/siemens/pxm2/board.h create mode 100644 board/siemens/pxm2/mux.c
>  create mode 100644 board/siemens/pxm2/pmic.h create mode 100644
>  board/siemens/rut/Makefile create mode 100644
>  board/siemens/rut/board.c create mode 100644 board/siemens/rut/board.h
>  create mode 100644 board/siemens/rut/mux.c create mode 100644
>  doc/README.mxc_hab create mode 100644 doc/README.mxsimage create mode
>  100644 drivers/serial/mxs_auart.c create mode 100644
>  drivers/video/formike.c create mode 100644 drivers/watchdog/omap_wdt.c
>  create mode 100644 include/configs/dxr2.h create mode 100644
>  include/configs/pxm2.h create mode 100644 include/configs/rut.h
>  create mode 100644 include/configs/siemens-am33x-common.h
>  create mode 100644 tools/logos/siemens.bmp
>  create mode 100644 tools/mxsimage.c
>  create mode 100644 tools/mxsimage.h

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130909/546f1dd6/attachment.pgp>


More information about the U-Boot mailing list