[U-Boot] [PATCH] doc: README.mxsimage: Use mkimage provided by U-boot

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Fix the text to make clear that the 'mkimage' provided by U-boot should be used
instead of the one provided by the host PC distribution.

While at it, also fix the directory location of the configuration files.

After these changes, it is possible succesfully generate a u-boot.sb image.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 doc/README.mxsimage | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/README.mxsimage b/doc/README.mxsimage
index 88a2caf..79cd06e 100644
--- a/doc/README.mxsimage
+++ b/doc/README.mxsimage
@@ -9,12 +9,12 @@ Usage -- producing image:
 The mxsimage tool is targeted to be a simple replacement for the elftosb2 .
 To generate an image, write an image configuration file and run:
 
- mkimage -A arm -O u-boot -T mxsimage -n <path to configuration file> \
+ ./tools/mkimage -A arm -O u-boot -T mxsimage -n <path to configuration file> \
          <output bootstream file>
 
 The output bootstream file is usually using the .sb file extension. Note
 that the example configuration files for producing bootable BootStream with
-the U-Boot bootloader can be found under arch/arm/boot/cpu/arm926ejs/mxs/
+the U-Boot bootloader can be found under arch/arm/cpu/arm926ejs/mxs/
 directory. See the following files:
 
  mxsimage.mx23.cfg -- This is an example configuration for i.MX23
@@ -158,7 +158,7 @@ Usage -- verifying image:
 The mxsimage can also verify and dump contents of an image. Use the following
 syntax to verify and dump contents of an image:
 
- mkimage -l <input bootstream file>
+ ./tools/mkimage -l <input bootstream file>
 
 This will output all the information from the SB image header and all the
 instructions contained in the SB image. It will also check if the various
-- 
1.8.1.2