[U-Boot] [PATCH] doc: README.mxsimage: Use mkimage provided by U-boot

[Marek Vasut]

Dear Fabio Estevam,

> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> Fix the text to make clear that the 'mkimage' provided by U-boot should be
> used instead of the one provided by the host PC distribution.
> 
> While at it, also fix the directory location of the configuration files.
> 
> After these changes, it is possible succesfully generate a u-boot.sb image.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  doc/README.mxsimage | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/doc/README.mxsimage b/doc/README.mxsimage
> index 88a2caf..79cd06e 100644
> --- a/doc/README.mxsimage
> +++ b/doc/README.mxsimage
> @@ -9,12 +9,12 @@ Usage -- producing image:
>  The mxsimage tool is targeted to be a simple replacement for the elftosb2
> . To generate an image, write an image configuration file and run:
> 
> - mkimage -A arm -O u-boot -T mxsimage -n <path to configuration file> \
> + ./tools/mkimage -A arm -O u-boot -T mxsimage -n <path to configuration
> file> \ <output bootstream file>
> 
>  The output bootstream file is usually using the .sb file extension. Note
>  that the example configuration files for producing bootable BootStream
> with -the U-Boot bootloader can be found under
> arch/arm/boot/cpu/arm926ejs/mxs/ +the U-Boot bootloader can be found under
> arch/arm/cpu/arm926ejs/mxs/ directory. See the following files:
> 
>   mxsimage.mx23.cfg -- This is an example configuration for i.MX23
> @@ -158,7 +158,7 @@ Usage -- verifying image:
>  The mxsimage can also verify and dump contents of an image. Use the
> following syntax to verify and dump contents of an image:
> 
> - mkimage -l <input bootstream file>
> + ./tools/mkimage -l <input bootstream file>
> 
>  This will output all the information from the SB image header and all the
>  instructions contained in the SB image. It will also check if the various

Tom, are you OK with such a hack (invoking the in-tree mkimage) in the 
documentation?

Best regards,
Marek Vasut