[U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards

[Igor Grinberg]

ping!

On 09/16/13 21:49, Igor Grinberg wrote:
> Two more adjustments before porting more Compulab boards to mainline U-Boot.
> Move the eeprom code which can be used (and is suitable) by multiple Compulab
> boards to a common location.
> Move the display initialization code which can be used by multiple Compulab
> OMAP based boards.
> 
> Igor Grinberg (2):
>   cm-t35: move the eeprom code to common place
>   cm-t35: move the display code to common place
> 
>  board/compulab/cm_t35/Makefile                     |  3 --
>  board/compulab/cm_t35/cm_t35.c                     |  7 ++-
>  board/compulab/common/Makefile                     | 36 +++++++++++++++
>  board/compulab/{cm_t35 => common}/eeprom.c         | 51 ++++++++++++----------
>  board/compulab/{cm_t35 => common}/eeprom.h         |  8 ++--
>  .../{cm_t35/display.c => common/omap3_display.c}   |  0
>  6 files changed, 70 insertions(+), 35 deletions(-)
>  create mode 100644 board/compulab/common/Makefile
>  rename board/compulab/{cm_t35 => common}/eeprom.c (60%)
>  rename board/compulab/{cm_t35 => common}/eeprom.h (62%)
>  rename board/compulab/{cm_t35/display.c => common/omap3_display.c} (100%)
> 

-- 
Regards,
Igor.