[U-Boot] [PATCH v2 05/10] arm: vf610: add enet1 base address definition

[Marcel Ziswiler]

Add secondary Ethernet MAC RMII1 base address definition in preparation
of potential secondary only board configurations.

Signed-off-by: Marcel Ziswiler <marcel at ziswiler.com>
---
 arch/arm/include/asm/arch-vf610/imx-regs.h |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index b8c877f..c2f9761 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -85,6 +85,7 @@
 #define ESDHC0_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00031000)
 #define ESDHC1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00032000)
 #define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
+#define ENET1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00051000)
 
 /* MUX mode and PAD ctrl are in one register */
 #define CONFIG_IOMUX_SHARE_CONF_REG
-- 
1.7.9.5