[U-Boot] [PATCH V4 10/17] usb: gadget: mv_udc: optimize bounce

[Troy Kisky]

On 9/20/2013 3:58 AM, Marek Vasut wrote:
> Dear Troy Kisky,
>
>> Only perform one copy, either in the bounce
>> routine for IN transfers, or the debounce
>> rtn for OUT transfer.
>>
>> On out transfers, only copy the number
>> of bytes received from the bounce buffer
>>
>> Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
>>
>> ---
>> v4: no change
> Just a question here. Are you sure we never Send AND Reserve the data in one
> turn? Because that would need two copyings.

  ???   s/Reserve/Receive/

As far as I'm aware, a single buffer is only ever used to capture or 
provide data not both.
But, if 2 transfers were queued, an OUT and then an IN using the same 
buffer, if it worked before
this patch, it should work after as well.
>
> Best regards,
> Marek Vasut
>