[U-Boot] Pull request - arm/zynq v3

Albert ARIBAUD albert.u.boot at aribaud.net
Tue Sep 3 14:12:33 CEST 2013


Hi Michal,

On Mon, 19 Aug 2013 09:36:33 +0200, Michal Simek <monstr at monstr.eu>
wrote:

> Hi Albert,
> 
> please pull these 3 zynq patches to your arm tree.
> I have rebased the tree on the 2013.07 to remove that new nds32 patches.
> 
> There is still pending the arm: lds: Remove libgcc eabi exception handling tables
> patch. Have you considered to also add it?
> 
> v3:
> - Rebase on the v2013.07 because Albert didn't want to nds32 stuff
> 
> v2:
> - Changed email address,
> - There was incorrect rebase which I have fixed - correct sha1 now
> 
> Thanks.
> Michal
> 
> 
> The following changes since commit 62c175fbb8a0f9a926c88294ea9f7e88eb898f6c:
> 
>   Prepare v2013.07 (2013-07-23 07:58:13 -0400)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-microblaze.git zynq
> 
> for you to fetch changes up to 037e0d25c6ee6367beca3062759993d10759dff2:
> 
>   zynq: Enable axi ethernet and emaclite driver initialization (2013-08-19 09:32:00 +0200)
> 
> ----------------------------------------------------------------
> Michal Simek (3):
>       zynq: Add new ddrc driver for ECC support
>       zynq: slcr: Wait 100ms till clk is properly setup
>       zynq: Enable axi ethernet and emaclite driver initialization
> 
>  arch/arm/cpu/armv7/zynq/Makefile           |  1 +
>  arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
>  arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
>  arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
>  arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
>  board/xilinx/zynq/board.c                  | 19 ++++++++++++
>  6 files changed, 80 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c
> 
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list