[U-Boot] [PULL] : Please pull u-boot-imx

Stefano Babic sbabic at denx.de
Fri Sep 27 14:11:56 CEST 2013


Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 8386ca8bea7a6a8469c3b6a99313afb642e6cbeb:

  Revert "standalone-examples: support custom GCC lib" (2013-09-12
10:27:29 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to ce7a7f5e6bda35d7d0972be07b6983552d1a2cb2:

  i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID (2013-09-27 13:53:35
+0200)

----------------------------------------------------------------
Andrew Gabbasov (1):
      mx6: Fix calculation of emi_slow clock rate

Elie De Brauwer (1):
      mxs_nand: Fix ECC strength for NAND flash with OOB size of 224

Eric Nelson (2):
      i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
      i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID

Fabio Estevam (17):
      mx6sabresd: Add LVDS splash screen support
      wandboard: Use imx6dl-wandboard.dtb for the solo version
      mx6sabresd: Avoid hang when HDMI cable is not connected
      mx6sabresd: Reset counter to prevent error message
      mmc: fsl_esdhc: Check the result from malloc()
      mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE
      mx6sabresd: Return error if cpu_eth_init() fails
      mx6qsabreauto: Return error if cpu_eth_init() fails
      net: fec_mxc: Add support for mx6 solo-lite
      mx6slevk: Add Ethernet support
      mx28evk: Fix checkpatch warning
      doc: README.mxs: Add instruction to install 'libssl-dev'
      mx6sabresd: Fix the fdt file for the mx6dl version
      net: fec_mxc: Fix timeouts during tftp transfer
      mx28evk: Propagate the error if cpu_eth_init() fails
      mx28evk: Propagate the error if cpu_eth_init() fails
      mx35pdk: Fix error handling in board_late_init()

Marek Vasut (6):
      tools: mxsboot: Mark the FCB pages as valid
      ARM: mxs: Sort the mx23evk and mx23_olinuxino
      ARM: mxs: Document the power block initialization
      ARM: mxs: Receive r0 and r1 passed from BootROM
      ARM: mxs: Add Creative ZEN XFi3 board
      ARM: mxs: Add SanDisk Sansa Fuze+ board

Markus Niebel (1):
      ARM: arch-mx6: fix PLL2_PFD2_FREQ

Pierre Aubert (1):
      mx6: Fix use of improper value in enable_ipu_clock

Robert Winkler (1):
      imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot-arm

York Sun (1):
      tools/imximage.c: Fix compiling warning

trem (3):
      mx27: add missing constant for mx27
      apf27: add support for the armadeus APF27 board
      apf27: add FPGA support for the apf27 board

 arch/arm/cpu/arm926ejs/mx27/asm-offsets.c     |    5 +
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c         |    5 +-
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c   |  209 +++++++++++
 arch/arm/cpu/arm926ejs/mxs/start.S            |   50 ++-
 arch/arm/cpu/armv7/mx6/clock.c                |   40 +-
 arch/arm/include/asm/arch-mx27/imx-regs.h     |    6 +-
 arch/arm/include/asm/arch-mx6/clock.h         |    1 +
 arch/arm/include/asm/arch-mx6/crm_regs.h      |    2 +-
 arch/arm/include/asm/arch-mx6/iomux.h         |    5 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h    |    6 +-
 arch/arm/include/asm/arch-mx6/mx6q_pins.h     |    1 +
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h    |   12 +
 arch/arm/include/asm/arch-mxs/sys_proto.h     |    5 +-
 board/armadeus/apf27/Makefile                 |   33 ++
 board/armadeus/apf27/apf27.c                  |  256 +++++++++++++
 board/armadeus/apf27/apf27.h                  |  489
+++++++++++++++++++++++++
 board/armadeus/apf27/fpga.c                   |  224 +++++++++++
 board/armadeus/apf27/fpga.h                   |   25 ++
 board/armadeus/apf27/lowlevel_init.S          |  168 +++++++++
 board/bluegiga/apx4devkit/spl_boot.c          |    4 +-
 board/boundary/nitrogen6x/nitrogen6x.c        |    4 +-
 board/creative/xfi3/Makefile                  |   31 ++
 board/creative/xfi3/spl_boot.c                |  134 +++++++
 board/creative/xfi3/xfi3.c                    |  224 +++++++++++
 board/denx/m28evk/m28evk.c                    |    2 +
 board/denx/m28evk/spl_boot.c                  |    4 +-
 board/freescale/mx23evk/spl_boot.c            |    4 +-
 board/freescale/mx28evk/iomux.c               |    4 +-
 board/freescale/mx28evk/mx28evk.c             |    4 +-
 board/freescale/mx35pdk/mx35pdk.c             |   10 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |    2 +-
 board/freescale/mx6sabresd/mx6sabresd.c       |  169 +++++++--
 board/freescale/mx6slevk/mx6slevk.c           |   68 ++++
 board/olimex/mx23_olinuxino/spl_boot.c        |    4 +-
 board/sandisk/sansa_fuze_plus/Makefile        |   31 ++
 board/sandisk/sansa_fuze_plus/sfp.c           |  388 ++++++++++++++++++++
 board/sandisk/sansa_fuze_plus/spl_boot.c      |  140 +++++++
 board/schulercontrol/sc_sps_1/spl_boot.c      |    4 +-
 boards.cfg                                    |    3 +
 doc/README.mxs                                |    5 +
 drivers/mmc/fsl_esdhc.c                       |    2 +
 drivers/mtd/nand/mxs_nand.c                   |    3 +
 drivers/net/fec_mxc.c                         |    4 +-
 drivers/net/fec_mxc.h                         |    4 +-
 include/configs/apf27.h                       |  388 ++++++++++++++++++++
 include/configs/mx35pdk.h                     |    1 -
 include/configs/mx6sabresd.h                  |    4 +
 include/configs/mx6slevk.h                    |   14 +
 include/configs/sansa_fuze_plus.h             |   70 ++++
 include/configs/wandboard.h                   |    4 +-
 include/configs/xfi3.h                        |   69 ++++
 tools/imximage.c                              |    8 +-
 tools/mxsboot.c                               |   10 +-
 53 files changed, 3269 insertions(+), 93 deletions(-)
 create mode 100644 board/armadeus/apf27/Makefile
 create mode 100644 board/armadeus/apf27/apf27.c
 create mode 100644 board/armadeus/apf27/apf27.h
 create mode 100644 board/armadeus/apf27/fpga.c
 create mode 100644 board/armadeus/apf27/fpga.h
 create mode 100644 board/armadeus/apf27/lowlevel_init.S
 create mode 100644 board/creative/xfi3/Makefile
 create mode 100644 board/creative/xfi3/spl_boot.c
 create mode 100644 board/creative/xfi3/xfi3.c
 create mode 100644 board/sandisk/sansa_fuze_plus/Makefile
 create mode 100644 board/sandisk/sansa_fuze_plus/sfp.c
 create mode 100644 board/sandisk/sansa_fuze_plus/spl_boot.c
 create mode 100644 include/configs/apf27.h
 create mode 100644 include/configs/sansa_fuze_plus.h
 create mode 100644 include/configs/xfi3.h

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list