[U-Boot] [PATCH 04/11] mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPL

[Scott Wood]

On Thu, 2013-09-26 at 16:28 -0400, Tom Rini wrote:
> This mainly converts the am335x_spl_bch driver to the "normal" format
> which means a slight change to nand_info within the driver.
> 
> Cc: Scott Wood <scottwood at freescale.com>
> Signed-off-by: Tom Rini <trini at ti.com>
> ---
>  drivers/mtd/nand/am335x_spl_bch.c |   54 ++++++++++++++++++-------------------
>  include/configs/ti_armv7_common.h |    1 +
>  spl/Makefile                      |    1 +
>  3 files changed, 29 insertions(+), 27 deletions(-)

Acked-by: Scott Wood <scottwood at freescale.com>

with one caveat:

> diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
> index e89e874..32110f6 100644
> --- a/include/configs/ti_armv7_common.h
> +++ b/include/configs/ti_armv7_common.h
> @@ -244,6 +244,7 @@
>  #define CONFIG_SPL_NAND_BASE
>  #define CONFIG_SPL_NAND_DRIVERS
>  #define CONFIG_SPL_NAND_ECC
> +#define CONFIG_SPL_MTD_SUPPORT
>  #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
>  #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
>  #endif
> diff --git a/spl/Makefile b/spl/Makefile
> index 174d0a7..fa642ec 100644
> --- a/spl/Makefile
> +++ b/spl/Makefile
> @@ -89,6 +89,7 @@ LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o
>  LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o
>  LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o
>  LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o
> +LIBS-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/libmtd.o
>  LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/libonenand.o
>  LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/libdma.o
>  LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o

This needs to be documented in the README.

-Scott