[U-Boot] [PATCH] mx28evk: Fix checkpatch warning

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Fix the following checkpatch warning:

$ ./tools/checkpatch.pl -F board/freescale/mx28evk/mx28evk.c 
CHECK: Alignment should match open parenthesis
#109: FILE: freescale/mx28evk/mx28evk.c:109:
+	writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN,
+					&clkctrl_regs->hw_clkctrl_enet);

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/freescale/mx28evk/mx28evk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c
index a307f27..3abf1fd 100644
--- a/board/freescale/mx28evk/mx28evk.c
+++ b/board/freescale/mx28evk/mx28evk.c
@@ -106,7 +106,7 @@ int board_eth_init(bd_t *bis)
 
 	/* MX28EVK uses ENET_CLK PAD to drive FEC clock */
 	writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN,
-					&clkctrl_regs->hw_clkctrl_enet);
+	       &clkctrl_regs->hw_clkctrl_enet);
 
 	/* Power-on FECs */
 	gpio_direction_output(MX28_PAD_SSP1_DATA3__GPIO_2_15, 0);
-- 
1.8.1.2