[U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards

[Igor Grinberg]

Two more adjustments before porting more Compulab boards to mainline U-Boot.
Move the eeprom code which can be used (and is suitable) by multiple Compulab
boards to a common location.
Move the display initialization code which can be used by multiple Compulab
OMAP based boards.

Igor Grinberg (2):
  cm-t35: move the eeprom code to common place
  cm-t35: move the display code to common place

 board/compulab/cm_t35/Makefile                     |  3 --
 board/compulab/cm_t35/cm_t35.c                     |  7 ++-
 board/compulab/common/Makefile                     | 36 +++++++++++++++
 board/compulab/{cm_t35 => common}/eeprom.c         | 51 ++++++++++++----------
 board/compulab/{cm_t35 => common}/eeprom.h         |  8 ++--
 .../{cm_t35/display.c => common/omap3_display.c}   |  0
 6 files changed, 70 insertions(+), 35 deletions(-)
 create mode 100644 board/compulab/common/Makefile
 rename board/compulab/{cm_t35 => common}/eeprom.c (60%)
 rename board/compulab/{cm_t35 => common}/eeprom.h (62%)
 rename board/compulab/{cm_t35/display.c => common/omap3_display.c} (100%)

-- 
1.8.1.5