[U-Boot] [PATCH 05/12 V3] Exynos5420: Modify TZPC init to support 5420

Rajeshwari Birje rajeshwari.birje at gmail.com
Mon Sep 23 07:11:31 CEST 2013


Hi Simon,

On Fri, Sep 20, 2013 at 8:31 PM, Simon Glass <sjg at chromium.org> wrote:

> Hi Rajeshwari,
>
> On Fri, Sep 20, 2013 at 3:32 AM, Rajeshwari Birje <
> rajeshwari.birje at gmail.com> wrote:
>
>> Hi Simon
>>
>> Thank you for coments.
>>
>> Regards,
>> Rajeshwari Shinde
>>
>> On Thu, Sep 19, 2013 at 11:27 AM, Simon Glass <sjg at chromium.org> wrote:
>>
>>> Hi Rajeshwari,
>>>
>>> On Wed, Sep 11, 2013 at 4:01 AM, Rajeshwari S Shinde <
>>> rajeshwari.s at samsung.com> wrote:
>>>
>>> > From: Akshay Saraswat <akshay.s at samsung.com>
>>> >
>>> > Currently, part of TZPC init code for Exynos5 starts setting DECPROT
>>> > from the base address 0x10100000 upto 0x10190000 but in case of
>>> > Exynos5420 we need it to start from 0x0100E0000 and keep end address
>>> > same as 0x10190000.
>>> >
>>> > Signed-off-by: Rajeshwari S Shinde <rajeshwari.s at samsung.com>
>>> > Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
>>> > ---
>>> > Changes in V2:
>>> >         - None
>>> > Changes in V3:
>>> >         - None
>>> >  arch/arm/cpu/armv7/exynos/tzpc.c | 7 ++++++-
>>> >  1 file changed, 6 insertions(+), 1 deletion(-)
>>> >
>>> > diff --git a/arch/arm/cpu/armv7/exynos/tzpc.c
>>> > b/arch/arm/cpu/armv7/exynos/tzpc.c
>>> > index 395077c..1102596 100644
>>> > --- a/arch/arm/cpu/armv7/exynos/tzpc.c
>>> > +++ b/arch/arm/cpu/armv7/exynos/tzpc.c
>>> > @@ -23,7 +23,12 @@ void tzpc_init(void)
>>> >         else if (cpu_is_exynos4())
>>> >                 end = start + ((EXYNOS4_NR_TZPC_BANKS - 1) *
>>> > TZPC_BASE_OFFSET);
>>> >
>>> > -       for (addr = start; addr <= end; addr += TZPC_BASE_OFFSET) {
>>> > +       if (proid_is_exynos5420())
>>> > +               addr = start - 0x20000;
>>> >
>>>
>>> Shouldn't this be in a #define somewhere?
>>>
>> Instead of having a  #define  we get the start address via
>> samsung_get_base_tzpc, since there exception in case of 5420 where we need
>> to start from 0x100E0000 we put a if condition.
>>
>
> Does that mean that the address returned by  samsung_get_base_tzpc()
> should be different for 5250 and 5420?
>
Yes they can be different, depends on the value you have mentioned in the
cpu.h file for that SOC.

>
>
>>>
>>> > +       else
>>> > +               addr = start;
>>> > +
>>> > +       for (; addr <= end; addr += TZPC_BASE_OFFSET) {
>>> >                 tzpc = (struct exynos_tzpc *)addr;
>>> >
>>> >                 if (addr == start)
>>> > --
>>> > 1.7.12.4
>>> >
>>> >
>>>
>>> Regards,
> Simon
>
>
> --
Regards,
Rajeshwari Shinde


More information about the U-Boot mailing list