[U-Boot] [PATCH v2 0/2] arm, da85x: updates for the ipam390 board

[Heiko Schocher]

enable the RBL/UBL ECC layout through
CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC define

see for more info:
http://processors.wiki.ti.com/index.php/DM365_Nand_ECC_layout

and use this on the ipam390 board. Also do some minor changes
for this board:

- update default environment
- change A2CR to correct value for UART boot mode
- adapt cs3cfg timings for nand
- change LED bootmode signalization

- changes for v2:
  - patch: nand, davinci: add special UBL ecc position
    - add comment from Scott Wood:
      - move  if/else/end to a more readable place

Heiko Schocher (2):
  nand, davinci: add special UBL ecc position
  arm, da85x: update for the ipam390 board

 board/Barix/ipam390/ipam390-ais-uart.cfg |  2 +-
 board/Barix/ipam390/ipam390.c            | 29 ++++++++------------------
 drivers/mtd/nand/davinci_nand.c          | 12 +++++++++++
 include/configs/ipam390.h                | 35 ++++++++++++++++++++------------
 4 Dateien geändert, 44 Zeilen hinzugefügt(+), 34 Zeilen entfernt(-)

Signed-off-by: Heiko Schocher <hs at denx.de>
Cc: Tom Rini <trini at ti.com>
Cc: Scott Wood <scottwood at freescale.com>
-- 
1.7.11.7