[U-Boot] [PATCH 3/5] mmc: don't call *printf or puts when SPL & !CONFIG_SPL_LIBCOMMON_SUPPORT
Paul Burton
paul.burton at imgtec.com
Fri Sep 6 14:51:41 CEST 2013
On 06/09/13 13:48, Pantelis Antoniou wrote:
> Hi Paul
>
> On Sep 4, 2013, at 6:12 PM, Paul Burton wrote:
>
>> If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio
>> & *printf functions are unavailable & calling them will cause a link
>> failure.
>>
>> Signed-off-by: Paul Burton <paul.burton at imgtec.com>
>> ---
>> drivers/mmc/mmc.c | 36 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 36 insertions(+)
>>
>> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
>> index 5502675..30a985b 100644
>> --- a/drivers/mmc/mmc.c
>> +++ b/drivers/mmc/mmc.c
>> @@ -135,8 +135,10 @@ static int mmc_send_status(struct mmc *mmc, int timeout)
>> MMC_STATE_PRG)
>> break;
>> else if (cmd.response[0] & MMC_STATUS_MASK) {
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("Status Error: 0x%08X\n",
>> cmd.response[0]);
>> +#endif
>> return COMM_ERR;
>> }
>> } else if (--retries < 0)
>> @@ -151,7 +153,9 @@ static int mmc_send_status(struct mmc *mmc, int timeout)
>> printf("CURR STATE:%d\n", status);
>> #endif
>> if (timeout <= 0) {
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("Timeout waiting card ready\n");
>> +#endif
>> return TIMEOUT;
>> }
>>
>> @@ -181,7 +185,9 @@ struct mmc *find_mmc_device(int dev_num)
>> return m;
>> }
>>
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("MMC Device %d not found\n", dev_num);
>> +#endif
>>
>> return NULL;
>> }
>> @@ -233,7 +239,9 @@ static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
>> return 0;
>>
>> err_out:
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> puts("mmc erase failed\n");
>> +#endif
>> return err;
>> }
>>
>> @@ -248,6 +256,7 @@ mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
>> if (!mmc)
>> return -1;
>>
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size))
>> printf("\n\nCaution! Your devices Erase group is 0x%x\n"
>> "The erase range would be change to "
>> @@ -255,6 +264,7 @@ mmc_berase(int dev_num, lbaint_t start, lbaint_t blkcnt)
>> mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1),
>> ((start + blkcnt + mmc->erase_grp_size)
>> & ~(mmc->erase_grp_size - 1)) - 1);
>> +#endif
>>
>> while (blk < blkcnt) {
>> blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ?
>> @@ -281,8 +291,10 @@ mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*sr
>> int timeout = 1000;
>>
>> if ((start + blkcnt) > mmc->block_dev.lba) {
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
>> start + blkcnt, mmc->block_dev.lba);
>> +#endif
>> return 0;
>> }
>>
>> @@ -306,7 +318,9 @@ mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*sr
>> data.flags = MMC_DATA_WRITE;
>>
>> if (mmc_send_cmd(mmc, &cmd, &data)) {
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("mmc write failed\n");
>> +#endif
>> return 0;
>> }
>>
>> @@ -318,7 +332,9 @@ mmc_write_blocks(struct mmc *mmc, lbaint_t start, lbaint_t blkcnt, const void*sr
>> cmd.cmdarg = 0;
>> cmd.resp_type = MMC_RSP_R1b;
>> if (mmc_send_cmd(mmc, &cmd, NULL)) {
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("mmc fail to send stop cmd\n");
>> +#endif
>> return 0;
>> }
>> }
>> @@ -385,7 +401,9 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
>> cmd.cmdarg = 0;
>> cmd.resp_type = MMC_RSP_R1b;
>> if (mmc_send_cmd(mmc, &cmd, NULL)) {
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("mmc fail to send stop cmd\n");
>> +#endif
>> return 0;
>> }
>> }
>> @@ -405,8 +423,10 @@ static ulong mmc_bread(int dev_num, lbaint_t start, lbaint_t blkcnt, void *dst)
>> return 0;
>>
>> if ((start + blkcnt) > mmc->block_dev.lba) {
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
>> start + blkcnt, mmc->block_dev.lba);
>> +#endif
>> return 0;
>> }
> The idea is sound, but I don't like peppering the source with #ifdefs here.
>
> Why not create a varargs orintf macro and use it instead
>
> i.e.
>
>
> #if !defined(CONFIG_SPL_BUILD_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
> #define mmc_printf(...) ...
> #else
> #define mmc_printf(...) /* nothing */
> #endif
That would work too, I'm fine with changing to that if people prefer it.
>> @@ -1268,6 +1288,7 @@ static int mmc_startup(struct mmc *mmc)
>> mmc->block_dev.blksz = mmc->read_bl_len;
>> mmc->block_dev.log2blksz = LOG2(mmc->block_dev.blksz);
>> mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len);
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> sprintf(mmc->block_dev.vendor, "Man %06x Snr %04x%04x",
>> mmc->cid[0] >> 24, (mmc->cid[2] & 0xffff),
>> (mmc->cid[3] >> 16) & 0xffff);
>> @@ -1277,6 +1298,11 @@ static int mmc_startup(struct mmc *mmc)
>> (mmc->cid[2] >> 24) & 0xff);
>> sprintf(mmc->block_dev.revision, "%d.%d", (mmc->cid[2] >> 20) & 0xf,
>> (mmc->cid[2] >> 16) & 0xf);
>> +#else
>> + mmc->block_dev.vendor[0] = 0;
>> + mmc->block_dev.product[0] = 0;
>> + mmc->block_dev.revision[0] = 0;
>> +#endif
> ^^^
> What goes on here?
Thanks for pointing that out, perhaps I should comment on it in the
source. Basically it needs to avoid sprintf, and since there's no
possibility that the information will ever be displayed in this case
(and it has no other uses than display) I figured it would be fine to
just have empty strings.
>> #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)
>> init_part(&mmc->block_dev);
>> #endif
>> @@ -1343,7 +1369,9 @@ int mmc_start_init(struct mmc *mmc)
>>
>> if (mmc_getcd(mmc) == 0) {
>> mmc->has_init = 0;
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("MMC: no card present\n");
>> +#endif
>> return NO_CARD_ERR;
>> }
>>
>> @@ -1378,7 +1406,9 @@ int mmc_start_init(struct mmc *mmc)
>> err = mmc_send_op_cond(mmc);
>>
>> if (err && err != IN_PROGRESS) {
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> printf("Card did not respond to voltage select!\n");
>> +#endif
>> return UNUSABLE_ERR;
>> }
>> }
>> @@ -1434,6 +1464,8 @@ static int __def_mmc_init(bd_t *bis)
>> int cpu_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init")));
>> int board_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init")));
>>
>> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
>> +
>> void print_mmc_devices(char separator)
>> {
>> struct mmc *m;
>> @@ -1451,6 +1483,10 @@ void print_mmc_devices(char separator)
>> printf("\n");
>> }
>>
>> +#else
>> +void print_mmc_devices(char separator) { }
>> +#endif
>> +
>> int get_mmc_num(void)
>> {
>> return cur_dev_num;
>> --
>> 1.8.3.4
>>
>>
> CCing Tom Rini on this.
>
> Regards
>
> -- Pantelis
>
Thanks,
Paul
More information about the U-Boot
mailing list