[U-Boot] [PATCH v10 3/6] generic board patch of manual reloc and zero gd_t

fenghua at phytium.com.cn fenghua at phytium.com.cn
Mon Sep 16 10:08:52 CEST 2013


From: David Feng <fenghua at phytium.com.cn>

Signed-off-by: David Feng <fenghua at phytium.com.cn>
---
 common/board_f.c |   18 +++++++++++-------
 common/board_r.c |   18 ++++++++++++++++++
 2 files changed, 29 insertions(+), 7 deletions(-)

diff --git a/common/board_f.c b/common/board_f.c
index 0ada1af..f92a39e 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -458,7 +458,7 @@ static int reserve_round_4k(void)
 static int reserve_mmu(void)
 {
 	/* reserve TLB table */
-	gd->arch.tlb_size = 4096 * 4;
+	gd->arch.tlb_size = PGTABLE_SIZE;
 	gd->relocaddr -= gd->arch.tlb_size;
 
 	/* round down to next 64 kB limit */
@@ -610,7 +610,7 @@ static int reserve_stacks(void)
 	 * TODO(sjg at chromium.org): Perhaps create arch_reserve_stack()
 	 * to handle this and put in arch/xxx/lib/stack.c
 	 */
-# ifdef CONFIG_ARM
+# if defined(CONFIG_ARM) && !defined(CONFIG_ARMV8)
 #  ifdef CONFIG_USE_IRQ
 	gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
 	debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
@@ -807,11 +807,6 @@ static int mark_bootstage(void)
 }
 
 static init_fnc_t init_sequence_f[] = {
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
-		!defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
-		!defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
-	zero_global_data,
-#endif
 #ifdef CONFIG_SANDBOX
 	setup_ram_buf,
 #endif
@@ -1005,6 +1000,15 @@ void board_init_f(ulong boot_flags)
 	gd = &data;
 #endif
 
+	/*
+	 * Zero gd_t first, otherwise the debug print(if DEBUG defined)
+	 * in initcall_run_list function before zero_global_data is called
+	 * will go wrong.
+	 */
+#ifndef CONFIG_X86
+	zero_global_data();
+#endif
+
 	gd->flags = boot_flags;
 
 	if (initcall_run_list(init_sequence_f))
diff --git a/common/board_r.c b/common/board_r.c
index 86ca1cb..862f8f6 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -157,6 +157,13 @@ static int initr_reloc_global_data(void)
 	 */
 	gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
 #endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+	/*
+	 * We have to relocate the command table manually
+	 */
+	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+			ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
 	return 0;
 }
 
@@ -899,6 +906,7 @@ init_fnc_t init_sequence_r[] = {
 	initr_modem,
 #endif
 	run_main_loop,
+	NULL,
 };
 
 void board_init_r(gd_t *new_gd, ulong dest_addr)
@@ -906,6 +914,16 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 #ifndef CONFIG_X86
 	gd = new_gd;
 #endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+	/*
+	 * We have to relocate the init_sequence_r table manually
+	 */
+	init_fnc_t	*init_fnc_ptr;
+	for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr)
+		*(unsigned long *)init_fnc_ptr =
+			(unsigned long)(*init_fnc_ptr) + gd->reloc_off;
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
 	if (initcall_run_list(init_sequence_r))
 		hang();
 
-- 
1.7.9.5




More information about the U-Boot mailing list