[U-Boot] please pull u-boot-samsung master

[Chander Kashyap]

On 5 September 2013 15:12, Chander Kashyap <chander.kashyap at linaro.org> wrote:
> Hi Albert,
>
> On 5 September 2013 14:43, Albert ARIBAUD <albert.u.boot at aribaud.net> wrote:
>> Hi Minkyu,
>>
>> On Fri, 30 Aug 2013 14:10:19 +0900, Minkyu Kang <mk7.kang at samsung.com>
>> wrote:
>>
>>> Dear Albert,
>>>
>>> The following changes since commit 9ed887caecb9ecb0c68773a1870d143b9f28d3da:
>>>
>>>   Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200)
>>>
>>> are available in the git repository at:
>>>
>>>
>>>   git://git.denx.de/u-boot-samsung master
>>>
>>> for you to fetch changes up to 812d7576cdbecc12d7eec7b533333d3a4a06234b:
>>>
>>>   drivers:power:max77686: add function to set voltage and mode (2013-08-30 12:24:54 +0900)
>>>
>>> ----------------------------------------------------------------
>>> Chander Kashyap (2):
>>>       CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles
>>>       exynos5250: Add arndale board support
>>>
>>> Inderpal Singh (1):
>>>       exynos5250: arndale: Add mmc support
>>>
>>> Minkyu Kang (2):
>>>       arm: smdkc100: remove config.mk file
>>>       arm: goni: remove config.mk file
>>>
>>> Piotr Wilczek (2):
>>>       arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
>>>       drivers:power:max77686: add function to set voltage and mode
>>>
>>>  MAINTAINERS                              |    4 +
>>>  Makefile                                 |    2 +-
>>>  arch/arm/include/asm/arch-exynos/gpio.h  |   17 +-
>>>  board/samsung/arndale/Makefile           |   34 ++++
>>>  board/samsung/arndale/arndale.c          |  101 ++++++++++++
>>>  board/samsung/arndale/arndale_spl.c      |   50 ++++++
>>>  board/samsung/dts/exynos5250-arndale.dts |   39 +++++
>>>  board/samsung/goni/config.mk             |   18 ---
>>>  board/samsung/smdkc100/config.mk         |   16 --
>>>  boards.cfg                               |    1 +
>>>  drivers/power/pmic/pmic_max77686.c       |  192 ++++++++++++++++++++++
>>>  include/configs/arndale.h                |  255 ++++++++++++++++++++++++++++++
>>>  include/configs/exynos5250-dt.h          |    2 +-
>>>  include/configs/s5p_goni.h               |    3 +
>>>  include/configs/smdkc100.h               |    3 +
>>>  include/power/max77686_pmic.h            |   26 +++
>>>  tools/Makefile                           |    4 +-
>>>  17 files changed, 725 insertions(+), 42 deletions(-)
>>>  create mode 100644 board/samsung/arndale/Makefile
>>>  create mode 100644 board/samsung/arndale/arndale.c
>>>  create mode 100644 board/samsung/arndale/arndale_spl.c
>>>  create mode 100644 board/samsung/dts/exynos5250-arndale.dts
>>>  delete mode 100644 board/samsung/goni/config.mk
>>>  delete mode 100644 board/samsung/smdkc100/config.mk
>>>  create mode 100644 include/configs/arndale.h
>>
>> Fails for arndale:
>>
>> Error: /home/albert/src/u-boot-arm/board/samsung/dts/exynos5250-arndale.dts:11.2-9
>> syntax error
>>
>> My dtc -v: "Version: DTC 1.4.0", built from source.
>
> Its working for me.
> But my dtc -v: "Version: DTC 1.3.0"
>

Tested now with dtc -v: "Version: DTC 1.4.0"

It got compiled. properly.  Or I missed something.

>
>>
>> Amicalement,
>> --
>> Albert.
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
>
> --
> with warm regards,
> Chander Kashyap



-- 
with warm regards,
Chander Kashyap