[U-Boot] [PATCH V3 0/5] EXYNOS: I2S: Enable I2S0 channel
Dani Krishna Mohan
krishna.md at samsung.com
Wed Sep 11 13:08:45 CEST 2013
This patch set adds I2S-0 support and retains I2S-1 support.
The default i2s channel can be selected through DT.
Changes in V3:
- Followed proper indentations
Changes in V2:
- Enabled I2S-0 support through DT
- Retained I2S-1 support
Changes in V1:
- Added I2S-0 support
- Removed I2S-1 support
Dani Krishna Mohan (5):
Sound: WM8994: Support I2S0 channel
DTS: Addition of I2S0 channel and replacing I2S1
ARM: Added I2S0 clocks for audio
Sound: I2S: Replacing I2S1 with I2S0 channel.
Sound: MAX98095: Support I2S0 channel
arch/arm/cpu/armv7/exynos/clock.c | 61 +++++++---
arch/arm/cpu/armv7/exynos/pinmux.c | 23 +++-
arch/arm/dts/exynos5250.dtsi | 19 +++
arch/arm/include/asm/arch-exynos/clk.h | 5 +-
arch/arm/include/asm/arch-exynos/clock.h | 4 +
arch/arm/include/asm/arch-exynos/cpu.h | 4 +
arch/arm/include/asm/arch-exynos/i2s-regs.h | 6 +
arch/arm/include/asm/arch-exynos/periph.h | 1 +
board/samsung/dts/exynos5250-smdk5250.dts | 13 +--
board/samsung/dts/exynos5250-snow.dts | 14 +--
drivers/sound/max98095.c | 155 ++++++++++++++++---------
drivers/sound/max98095.h | 10 +-
drivers/sound/samsung-i2s.c | 65 ++++++++---
drivers/sound/sound.c | 28 +++--
drivers/sound/wm8994.c | 167 +++++++++++++++++++--------
drivers/sound/wm8994_registers.h | 39 ++++++-
include/i2s.h | 1 +
17 files changed, 437 insertions(+), 178 deletions(-)
--
1.7.9.5
More information about the U-Boot
mailing list