[U-Boot] [PATCH 1/2] net: fec_mxc: Add support for mx6 solo-lite
Fabio Estevam
festevam at gmail.com
Fri Sep 13 00:41:17 CEST 2013
From: Fabio Estevam <fabio.estevam at freescale.com>
Similarly as mx25 and mx53, mx6solo-lite needs to setup the MII gasket for RMII
mode.
Add support for mx6solo-lite.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Based on FSL BSP, which uses U-boot 2013.04.
drivers/net/fec_mxc.c | 2 +-
drivers/net/fec_mxc.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index e14a359..f4a0c5d 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -453,7 +453,7 @@ static int fec_open(struct eth_device *edev)
*/
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
&fec->eth->ecntrl);
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
+#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
udelay(100);
/*
* setup the MII gasket for RMII mode
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 4b4f8b7..0717cc6 100644
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -135,7 +135,7 @@ struct ethernet_regs {
uint32_t res14[7]; /* MBAR_ETH + 0x2E4-2FC */
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
+#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
uint16_t miigsk_cfgr; /* MBAR_ETH + 0x300 */
uint16_t res15[3]; /* MBAR_ETH + 0x302-306 */
uint16_t miigsk_enr; /* MBAR_ETH + 0x308 */
@@ -202,7 +202,7 @@ struct ethernet_regs {
#define FEC_X_DES_ACTIVE_TDAR 0x01000000
#define FEC_R_DES_ACTIVE_RDAR 0x01000000
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
+#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
/* defines for MIIGSK */
/* RMII frequency control: 0=50MHz, 1=5MHz */
#define MIIGSK_CFGR_FRCONT (1 << 6)
--
1.8.1.2
More information about the U-Boot
mailing list