[U-Boot] [PATCH v4 0/3] i2c, mxc: switch to new multibus/multiadapter framework

[Philippe Reynes]

This serie is composed of three patches:
- one to fix the i2c init on the generic board
- one to port the i2c mxc driver to new subsystem
- one to update all configurations with i2c mxc driver

This serie was tested with success on armadeus apf27.

Difference between v4 and v3:
- add a comment on patch 1

Difference between v3 and v2:
- change title of patch 2 (specify mxc)

Difference between v2 and v1:
- change title of the serie
- use define for speed and slave for each i2c bus
- sort i2c driver list
- define mxc function as static
- remove CONFIG_I2C_MULTI_BUS in config using i2c mxc

Philippe Reynes (3):
  i2c: fix init on generic board
  i2c: mxc: move to new subsystem
  i2c: update config using mxc driver to new subsystem

 README                            |   11 +++
 arch/arm/cpu/armv7/mx5/clock.c    |    2 +-
 arch/arm/cpu/armv7/mx6/clock.c    |    2 +-
 arch/arm/imx-common/Makefile      |    2 +-
 common/board_f.c                  |    4 +
 drivers/i2c/Makefile              |    2 +-
 drivers/i2c/mxc_i2c.c             |  137 +++++++++++++++++++++----------------
 include/configs/apf27.h           |   11 ++--
 include/configs/flea3.h           |    9 +--
 include/configs/imx31_phycore.h   |    7 +-
 include/configs/m53evk.h          |    7 +-
 include/configs/mx25pdk.h         |    7 +-
 include/configs/mx35pdk.h         |    7 +-
 include/configs/mx53ard.h         |    7 +-
 include/configs/mx53evk.h         |    7 +-
 include/configs/mx53loco.h        |    7 +-
 include/configs/mx53smd.h         |    7 +-
 include/configs/mx6qsabreauto.h   |    4 +-
 include/configs/nitrogen6x.h      |    4 +-
 include/configs/titanium.h        |    4 +-
 include/configs/vf610twr.h        |    7 +-
 include/configs/woodburn_common.h |    7 +-
 22 files changed, 143 insertions(+), 119 deletions(-)

-- 
1.7.4.4