[U-Boot] [PATCH][v2] powerpc/t1040qds: Add T1040QDS board

[York Sun]

On 09/11/2013 10:41 PM, Prabhakar Kushwaha wrote:
> T1040QDS is a high-performance computing evaluation, development and
> test platform supporting the T1040 QorIQ Power Architecture™ processor.
> 
>  T1040QDS board Overview
>  -----------------------
>  - Four e5500 cores, each with a private 256 KB L2 cache
>  - 256 KB shared L3 CoreNet platform cache (CPC)
>  - Interconnect CoreNet platform
>  - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
>    support
>  - Data Path Acceleration Architecture (DPAA) incorporating acceleration
>  for the following functions:
>     -  Packet parsing, classification, and distribution
>     -  Queue management for scheduling, packet sequencing, and congestion
>     	management
>     -  Cryptography Acceleration
>     - RegEx Pattern Matching Acceleration
>     - IEEE Std 1588 support
>     - Hardware buffer management for buffer allocation and deallocation
>  - Ethernet interfaces
>     - Integrated 8-port Gigabit Ethernet switch
>     - Four 1 Gbps Ethernet controllers
>  - SERDES Connections, 8 lanes supporting:
>       — PCI Express: supporting Gen 1 and Gen 2;
>       — SGMII
>       — QSGMII
>       — SATA 2.0
>       — Aurora debug with dedicated connectors
>  - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and
>    Interleaving
>  -IFC/Local Bus
>      - NAND flash: 8-bit, async, up to 2GB.
>      - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
>      - GASIC: Simple (minimal) target within Qixis FPGA
>      - PromJET rapid memory download support
>  - Ethernet
>      - Two on-board RGMII 10/100/1G ethernet ports.
>      - PHY #0 remains powered up during deep-sleep
>  - QIXIS System Logic FPGA
>  - Clocks
>      - System and DDR clock (SYSCLK, “DDRCLK”)
>      - SERDES clocks
>  - Power Supplies
>  - Video
>      - DIU supports video at up to 1280x1024x32bpp
>  - USB
>      - Supports two USB 2.0 ports with integrated PHYs
>      — Two type A ports with 5V at 1.5A per port.
>      — Second port can be converted to OTG mini-AB
>  - SDHC
>      - SDHC port connects directly to an adapter card slot, featuring:
>      - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC
>      — Supporting eMMC memory devices
>  - SPI
>     -  On-board support of 3 different devices and sizes
>  - Other IO
>     - Two Serial ports
>     - ProfiBus port
>     - Four I2C ports
> 
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> ---
>  This patch depends upon 
>  powerpc: Fix CamelCase checkpatch warning in DDR related code
>  http://patchwork.ozlabs.org/patch/271670/ 
> 
>  TODO: Add support of ethernet. 
> 
>  Changes for v2: Incorporated Wolfgang Denk's comments
>   - fix checkpatch warning
>   - removed uncalled function 
> 

Applied to u-boot-mpc85xx/next after fixing minor conflict in
boards.cfg, pending merging to u-boot-mpc85xx/master.

York