[U-Boot] [PATCH] arm: lds: Remove libgcc eabi exception handling tables

[Michal Simek]

Hi Albert,

On 09/05/2013 03:03 PM, Albert ARIBAUD wrote:
> Hi Michal,
> 
> On Thu, 25 Jul 2013 16:16:46 +0200, Michal Simek
> <michal.simek at xilinx.com> wrote:
> 
>> Remove ARM eabi exception handling tables (for frame unwinding).
>> AFAICT, u-boot stubs away the frame unwiding routines, so the tables will
>> more or less just consume space. It should be OK to remove them.
>>
>> Signed-off-by: Edgar E. Iglesias <edgar.iglesias at xilinx.com>
>> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
>> ---
>> This patch was sent to ML as RFC (May 9)
>>
>> Here is the origin response in connection to this patch.
>>
>> Ok, so Michal and I just did some fiddling with zynq builds and
>> *exidx* sections.
>>
>> By default the *exidx* sections are between rodata and data, so
>> removing them causes many apparent changes at the binary level.
>> However, builds of zynq based on ARM master with the patch above vs
>> master with a patch mapping *exidx* sections after BSS gives identical
>> binaries. Thus the RFC has no functional effect.
>>
>> Also, ARM EHABI states that [exception] Tables are not required for ABI
>> compliance at the C/Assembler level but are required for C++.
>>
>> http://infocenter.arm.com/help/topic/com.arm.doc.ihi0038a/IHI0038A_ehabi.pdf
>>
>> So as long as we don't put any C++ code in U-Boot (a prospect that I
>> don't see happening any time soon), this RFC is safe and either is a
>> no-op or removes useless bytes from the binary.
>>
>> ---
>>  arch/arm/cpu/u-boot.lds | 2 ++
>>  1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
>> index 3037885..8894c8a 100644
>> --- a/arch/arm/cpu/u-boot.lds
>> +++ b/arch/arm/cpu/u-boot.lds
>> @@ -113,4 +113,6 @@ SECTIONS
>>  	/DISCARD/ : { *(.plt*) }
>>  	/DISCARD/ : { *(.interp*) }
>>  	/DISCARD/ : { *(.gnu*) }
>> +	/DISCARD/ : { *(.ARM.exidx*) }
>> +	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
>>  }
>> --
>> 1.8.2.3
>>
> 
> The good news is, it applies and does not cause any build issues.
> 
> The less good news is, arch/arm/cpu/u-boot.lds is not the only linker
> script file to fix if we want to fix it this way.
> 
> The fact is, I am not sure removing sections from the ELF filein order
> to avoid them being in the binary is actually the right way to go. I
> have recently had to 'un-discard' some sections in order for
> 'offline' debugging tools to properly understand the ELF file.
> 
> So I am wondering if we should not stop using /DISCARD/ and start using
> $(CROSS_COMPILE)objcopy options (-j or --strip-* and --remove-section).
> 
> This way, the ELF file would be as complete as any debug tool might
> expect it (e.g. objdump, especially when debugging relocation issues)
> yet the binary file would remain unchanged.
> 
> But past rc2 is not a time to start such a change.
> 
> Still, I'd like your fix to be consistent across all of ARM. Can you
> change all the linker scripts used for build ARM targets? These are,
> according to an ugly mix of cat LOG/*.MAKELOG, sed, grep and sort -u:
> 
> arch/arm/cpu/arm1136/u-boot-spl.lds
> arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
> arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
> arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
> arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
> arch/arm/cpu/ixp/u-boot.lds
> arch/arm/cpu/u-boot.lds
> arch/arm/cpu/u-boot-spl.lds
> board/actux1/u-boot.lds
> board/actux2/u-boot.lds
> board/actux3/u-boot.lds
> board/ait/cam_enc_4xx/u-boot-spl.lds
> board/davinci/da8xxevm/u-boot-spl-da850evm.lds
> board/davinci/da8xxevm/u-boot-spl-hawk.lds
> board/dvlhost/u-boot.lds
> board/freescale/mx31ads/u-boot.lds
> board/samsung/common/exynos-uboot-spl.lds
> board/ti/am335x/u-boot.lds
> board/vpac270/u-boot-spl.lds

Honestly for me is much easier just fix our timer code not to use this section
instead of trying to fix 3rd party platforms.
Is there any reason why too many linkers scripts are in u-boot for ARM?

Thanks,
Michal


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130905/e6cb68fc/attachment.pgp>