[U-Boot] [PATCH V2 4/5] Sound: I2S: Replacing I2S1 with I2S0 channel.

[Dani Krishna Mohan]

This patch makes required changes to make use
of I2S0 channel instead of I2S1 channel on exynos5250.

Signed-off-by: Dani Krishna Mohan <krishna.md at samsung.com>
---
 arch/arm/include/asm/arch-exynos/i2s-regs.h |    6 ++++
 drivers/sound/samsung-i2s.c                 |   42 +++++++++++++++++++--------
 2 files changed, 36 insertions(+), 12 deletions(-)

diff --git a/arch/arm/include/asm/arch-exynos/i2s-regs.h b/arch/arm/include/asm/arch-exynos/i2s-regs.h
index 613b9b7..4a4a7a0 100644
--- a/arch/arm/include/asm/arch-exynos/i2s-regs.h
+++ b/arch/arm/include/asm/arch-exynos/i2s-regs.h
@@ -8,10 +8,12 @@
 #ifndef __I2S_REGS_H__
 #define __I2S_REGS_H__
 
+#define CON_RESET		(1 << 31)
 #define CON_TXFIFO_FULL		(1 << 8)
 #define CON_TXCH_PAUSE		(1 << 4)
 #define CON_ACTIVE		(1 << 0)
 
+#define MOD_OP_CLK		(3 << 30)
 #define MOD_BLCP_SHIFT		24
 #define MOD_BLCP_16BIT		(0 << MOD_BLCP_SHIFT)
 #define MOD_BLCP_8BIT		(1 << MOD_BLCP_SHIFT)
@@ -24,6 +26,7 @@
 #define MOD_BLC_MASK		(3 << 13)
 
 #define MOD_SLAVE		(1 << 11)
+#define MOD_RCLKSRC		(0 << 10)
 #define MOD_MASK		(3 << 8)
 #define MOD_LR_LLOW		(0 << 7)
 #define MOD_LR_RLOW		(1 << 7)
@@ -47,4 +50,7 @@
 #define FIC_TXFLUSH		(1 << 15)
 #define FIC_RXFLUSH		(1 << 7)
 
+#define PSREN			(1 << 15)
+#define PSVAL			(3 << 8)
+
 #endif /* __I2S_REGS_H__ */
diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c
index 9caa4d2..66db9a8 100644
--- a/drivers/sound/samsung-i2s.c
+++ b/drivers/sound/samsung-i2s.c
@@ -65,7 +65,6 @@ static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
 	if (on) {
 		con |= CON_ACTIVE;
 		con &= ~CON_TXCH_PAUSE;
-
 	} else {
 		con |=  CON_TXCH_PAUSE;
 		con &= ~CON_ACTIVE;
@@ -300,28 +299,47 @@ int i2s_tx_init(struct i2stx_info *pi2s_tx)
 	int ret;
 	struct i2s_reg *i2s_reg =
 				(struct i2s_reg *)pi2s_tx->base_address;
+	if (pi2s_tx->id == 0) {
+		/* Initialize GPIO for I2S-0 */
+		exynos_pinmux_config(PERIPH_ID_I2S0, 0);
+
+		/* Set EPLL Clock */
+		ret = set_epll_clk(pi2s_tx->samplingrate * pi2s_tx->rfs * 4);
+	} else if (pi2s_tx->id == 1) {
+		/* Initialize GPIO for I2S-1 */
+		exynos_pinmux_config(PERIPH_ID_I2S1, 0);
+
+		/* Set EPLL Clock */
+		ret = set_epll_clk(pi2s_tx->audio_pll_clk);
+	} else {
+		debug("%s: unsupported i2s-%d bus\n", __func__, pi2s_tx->id);
+		return -1;
+	}
 
-	/* Initialize GPIO for I2s */
-	exynos_pinmux_config(PERIPH_ID_I2S1, 0);
-
-	/* Set EPLL Clock */
-	ret = set_epll_clk(pi2s_tx->audio_pll_clk);
 	if (ret != 0) {
 		debug("%s: epll clock set rate falied\n", __func__);
 		return -1;
 	}
 
-	/* Select Clk Source for Audio1 */
+	/* Select Clk Source for Audio 0 or 1 */
 	set_i2s_clk_source(pi2s_tx->id);
 
-	/* Set Prescaler to get MCLK */
-	set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
-			      (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
-			      pi2s_tx->id);
+	if (pi2s_tx->id == 0) {
+		/*Reset the i2s module */
+		writel(CON_RESET, &i2s_reg->con);
 
+		writel(MOD_OP_CLK | MOD_RCLKSRC, &i2s_reg->mod);
+		/* set i2s prescaler */
+		writel(PSREN | PSVAL, &i2s_reg->psr);
+	} else {
+		/* Set Prescaler to get MCLK */
+		set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
+				      (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+				      pi2s_tx->id);
+	}
 	/* Configure I2s format */
 	ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-				SND_SOC_DAIFMT_CBM_CFM));
+			  SND_SOC_DAIFMT_CBM_CFM));
 	if (ret == 0) {
 		i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs);
 		ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample);
-- 
1.7.9.5