[U-Boot] [PATCH v3 16/28] sf: probe: Move BAR config to spi_flash_validate_ids

[Jagannadha Sutradharudu Teki]

Moved BAR config to spi_flash_validate_ids, so its
better to have all flash initalization at once.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna at xilinx.com>
---
Changes for v3:
	- none
Changes for v2:
	- none

 drivers/mtd/spi/spi_flash_internal.h |  5 -----
 drivers/mtd/spi/spi_flash_probe.c    | 24 +++++++++++-------------
 include/spi_flash.h                  |  3 +++
 3 files changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index ce34ce0..6227d2e 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -31,11 +31,6 @@
 
 #define SPI_FLASH_16MB_BOUN		0x1000000
 
-/* Manufacture ID's */
-#define SPI_FLASH_SPANSION_IDCODE0	0x01
-#define SPI_FLASH_STMICRO_IDCODE0	0x20
-#define SPI_FLASH_WINBOND_IDCODE0	0xef
-
 #ifdef CONFIG_SPI_FLASH_BAR
 /* Bank addr access commands */
 # define CMD_BANKADDR_BRWR		0x17
diff --git a/drivers/mtd/spi/spi_flash_probe.c b/drivers/mtd/spi/spi_flash_probe.c
index 842b03a..69b41a0 100644
--- a/drivers/mtd/spi/spi_flash_probe.c
+++ b/drivers/mtd/spi/spi_flash_probe.c
@@ -219,6 +219,12 @@ struct spi_flash *spi_flash_validate_ids(struct spi_slave *spi, u8 *idcode)
 	if (params->flags & E_FSR)
 		flash->poll_cmd = CMD_FLAG_STATUS;
 
+#ifdef CONFIG_SPI_FLASH_BAR
+	/* Configure the BAR - discover bank cmds and read current bank  */
+	if (spi_flash_bank_config(flash, idcode[0]) < 0)
+		return NULL;
+#endif
+
 	/* Flash powers up read-only, so clear BP# bits */
 	if (((params->jedec >> 16) == SPI_FLASH_CFI_MFR_ATMEL) ||
 	    ((params->jedec >> 16) == SPI_FLASH_CFI_MFR_MACRONIX) ||
@@ -236,12 +242,12 @@ int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0)
 
 	/* discover bank cmds */
 	switch (idcode0) {
-	case SPI_FLASH_SPANSION_IDCODE0:
+	case SPI_FLASH_CFI_MFR_SPANSION:
 		flash->bank_read_cmd = CMD_BANKADDR_BRRD;
 		flash->bank_write_cmd = CMD_BANKADDR_BRWR;
 		break;
-	case SPI_FLASH_STMICRO_IDCODE0:
-	case SPI_FLASH_WINBOND_IDCODE0:
+	case SPI_FLASH_CFI_MFR_STMICRO:
+	case SPI_FLASH_CFI_MFR_WINBOND:
 		flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
 		flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
 		break;
@@ -299,7 +305,7 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 {
 	struct spi_slave *spi;
 	struct spi_flash *flash = NULL;
-	u8 idcode[5], *idp;
+	u8 idcode[5];
 	int ret;
 
 	/* Setup spi_slave */
@@ -329,18 +335,10 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 #endif
 
 	/* Validate ID's from flash dev table */
-	idp = idcode;
-	flash = spi_flash_validate_ids(spi, idp);
+	flash = spi_flash_validate_ids(spi, idcode);
 	if (!flash)
 		goto err_read_id;
 
-#ifdef CONFIG_SPI_FLASH_BAR
-	/* Configure the BAR - discover bank cmds and read current bank  */
-	ret = spi_flash_bank_config(flash, *idp);
-	if (ret < 0)
-		goto err_read_id;
-#endif
-
 #ifdef CONFIG_OF_CONTROL
 	if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
 		debug("SF: FDT decode error\n");
diff --git a/include/spi_flash.h b/include/spi_flash.h
index 3e60fdc..14e4ae2 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -20,7 +20,10 @@
 /* SPI flash CFI Manufacture ID's */
 #define SPI_FLASH_CFI_MFR_ATMEL			0x1f
 #define SPI_FLASH_CFI_MFR_MACRONIX		0xc2
+#define SPI_FLASH_CFI_MFR_SPANSION		0x01
 #define SPI_FLASH_CFI_MFR_SST			0xbf
+#define SPI_FLASH_CFI_MFR_STMICRO		0x20
+#define SPI_FLASH_CFI_MFR_WINBOND		0xef
 
 /* SECT flags */
 #define SECT_4K			(1 << 0)
-- 
1.8.3