[U-Boot] [PATCH 1/3] arm/km: add support for km_kirkwood_128m16 board

Holger Brunck holger.brunck at keymile.com
Wed Sep 25 09:19:41 CEST 2013


Hi Prafulla, hi Albert,
we are not so far away from v2013.10 I guess, so could one of you please pick of
these small patch series? Thanks!

Note for this patch there is already a v2 posted which applies cleanly again.

So there were:
http://patchwork.ozlabs.org/patch/275613/
http://patchwork.ozlabs.org/patch/256901/
http://patchwork.ozlabs.org/patch/256900/

Regards
Holger

On 07/04/2013 03:29 PM, Holger Brunck wrote:
> From: Karlheinz Jerg <karlheinz.jerg at keymile.com>
> 
> The board is similar to the standard km_kirkwood board. From a
> u-boot point of view, the only difference is an increased
> 256 MiB DRAM (128M16). A board based on this design is for
> example the SUP12.
> 
> Signed-off-by: Karlheinz Jerg <karlheinz.jerg at keymile.com>
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> ---
>  boards.cfg                    |  1 +
>  include/configs/km_kirkwood.h | 10 ++++++++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/boards.cfg b/boards.cfg
> index c0c4282..2bb493f 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -165,6 +165,7 @@ lschlv2                      arm         arm926ejs   lsxl                buffalo
>  lsxhl                        arm         arm926ejs   lsxl                buffalo        kirkwood    lsxl:LSXHL
>  km_kirkwood                  arm         arm926ejs   km_arm              keymile        kirkwood    km_kirkwood:KM_KIRKWOOD
>  km_kirkwood_pci              arm         arm926ejs   km_arm              keymile        kirkwood    km_kirkwood:KM_KIRKWOOD_PCI
> +km_kirkwood_128m16           arm         arm926ejs   km_arm              keymile        kirkwood    km_kirkwood:KM_KIRKWOOD_128M16
>  kmnusa                       arm         arm926ejs   km_arm              keymile        kirkwood    km_kirkwood:KM_NUSA
>  kmsuv31                      arm         arm926ejs   km_arm              keymile        kirkwood    km_kirkwood:KM_SUV31
>  mgcoge3un                    arm         arm926ejs   km_arm              keymile        kirkwood    km_kirkwood:KM_MGCOGE3UN
> diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
> index 83bb7aa..2b5f389 100644
> --- a/include/configs/km_kirkwood.h
> +++ b/include/configs/km_kirkwood.h
> @@ -51,6 +51,16 @@
>  #define KM_IVM_BUS			"pca9544a:70:9"	/* I2C2 (Mux-Port 1)*/
>  #define CONFIG_KM_FPGA_CONFIG
>  
> +/* KM_KIRKWOOD_128M16 */
> +#elif defined(CONFIG_KM_KIRKWOOD_128M16)
> +#define CONFIG_IDENT_STRING		"\nKeymile Kirkwood 128M16"
> +#define CONFIG_HOSTNAME			km_kirkwood_128m16
> +#undef CONFIG_SYS_KWD_CONFIG
> +#define CONFIG_SYS_KWD_CONFIG \
> +		$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
> +#define CONFIG_KM_DISABLE_PCIE
> +#define KM_IVM_BUS			"pca9544a:70:9"	/* I2C2 (Mux-Port 1)*/
> +
>  /* KM_NUSA */
>  #elif defined(CONFIG_KM_NUSA)
>  #define KM_IVM_BUS			"pca9547:70:9"	/* I2C2 (Mux-Port 1)*/
> 



More information about the U-Boot mailing list