[U-Boot] [PATCH 2/2] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board

Alban Bedel alban.bedel at avionic-design.de
Wed Sep 4 15:00:18 CEST 2013


Add support for the new Tamonten™ NG platform from Avionic Design.
Currently only I2C, MMC, USB and ethernet have been tested.

Signed-off-by: Alban Bedel <alban.bedel at avionic-design.de>
---
 .../common/pinmux-config-tamonten-ng.h             | 385 +++++++++++++++++++++
 board/avionic-design/common/tamonten-ng.c          | 129 +++++++
 board/avionic-design/dts/tegra30-tamonten.dtsi     |  74 ++++
 board/avionic-design/dts/tegra30-tec-ng.dts        |   8 +
 board/avionic-design/tec-ng/Makefile               |  32 ++
 boards.cfg                                         |   1 +
 include/configs/tec-ng.h                           |  84 +++++
 7 files changed, 713 insertions(+)
 create mode 100644 board/avionic-design/common/pinmux-config-tamonten-ng.h
 create mode 100644 board/avionic-design/common/tamonten-ng.c
 create mode 100644 board/avionic-design/dts/tegra30-tamonten.dtsi
 create mode 100644 board/avionic-design/dts/tegra30-tec-ng.dts
 create mode 100644 board/avionic-design/tec-ng/Makefile
 create mode 100644 include/configs/tec-ng.h

diff --git a/board/avionic-design/common/pinmux-config-tamonten-ng.h b/board/avionic-design/common/pinmux-config-tamonten-ng.h
new file mode 100644
index 0000000..39df731
--- /dev/null
+++ b/board/avionic-design/common/pinmux-config-tamonten-ng.h
@@ -0,0 +1,385 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _PINMUX_CONFIG_TAMONTEN_NG_H_
+#define _PINMUX_CONFIG_TAMONTEN_NG_H_
+
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io)	\
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_DEFAULT,	\
+		.od		= PMUX_PIN_OD_DEFAULT,		\
+		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
+	}
+
+#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_##_lock,	\
+		.od		= PMUX_PIN_OD_##_od,		\
+		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
+	}
+
+#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_##_lock,	\
+		.od		= PMUX_PIN_OD_DEFAULT,		\
+		.ioreset	= PMUX_PIN_IO_RESET_##_ioreset	\
+	}
+
+#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+	{							\
+		.padgrp		= PDRIVE_PINGROUP_##_padgrp,	\
+		.slwf		= _slwf,			\
+		.slwr		= _slwr,			\
+		.drvup		= _drvup,			\
+		.drvdn		= _drvdn,			\
+		.lpmd		= PGRP_LPMD_##_lpmd,		\
+		.schmt		= PGRP_SCHMT_##_schmt,		\
+		.hsm		= PGRP_HSM_##_hsm,		\
+	}
+
+static struct pingroup_config tamonten_ng_pinmux_common[] = {
+	/* SDMMC1 pinmux */
+	DEFAULT_PINMUX(SDMMC1_CLK,  SDMMC1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_CMD,  SDMMC1, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP,     NORMAL, INPUT),
+
+	/* SDMMC3 pinmux */
+	DEFAULT_PINMUX(SDMMC3_CLK,  SDMMC3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_CMD,  SDMMC3, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT4, SDMMC3, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT5, SDMMC3, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT6, SDMMC3, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT7, SDMMC3, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_IORDY,   RSVD1,  UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_CS6_N,   RSVD1,  UP,     NORMAL, INPUT),
+
+	/* SDMMC4 pinmux */
+	LV_PINMUX(SDMMC4_CLK,   SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_CMD,   SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT0,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT1,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT2,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT3,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT4,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT5,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT6,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT7,  SDMMC4, UP,     NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_RST_N, RSVD1,  DOWN,   NORMAL, INPUT, DISABLE, DISABLE),
+
+	/* I2C1 pinmux */
+	I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	/* I2C2 pinmux */
+	I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	/* I2C3 pinmux */
+	I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	/* I2C4 pinmux */
+	I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	/* Power I2C pinmux */
+	I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	/* UART1 */
+	DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(ULPI_DATA1, UARTA, NORMAL, NORMAL, INPUT),
+
+	/* UART2 */
+	DEFAULT_PINMUX(UART2_RXD,   UARTB, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(UART2_TXD,   UARTB, NORMAL, NORMAL, OUTPUT),
+
+	/* UART3 */
+	DEFAULT_PINMUX(UART3_TXD,   UARTC, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(UART3_RXD,   UARTC, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
+
+	/* UART4 */
+	DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(ULPI_DIR, UARTD, UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT),
+
+	/* DAP */
+	DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+
+	/* I2S1 */
+	DEFAULT_PINMUX(DAP2_FS,   I2S1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP2_DIN,  I2S1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
+
+	/* SPDIF */
+	DEFAULT_PINMUX(SPDIF_IN,  SPDIF, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT),
+
+	/* I2S2 */
+	DEFAULT_PINMUX(DAP3_FS,   I2S2, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP3_DIN,  I2S2, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT),
+
+	/* DAP4 */
+	DEFAULT_PINMUX(DAP4_FS,   I2S3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP4_DIN,  I2S3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
+
+	/* Tamonten GPIO */
+	DEFAULT_PINMUX(GPIO_PV2,   RSVD1, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GPIO_PV3,   RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPI2_CS1_N, RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* LCD */
+	DEFAULT_PINMUX(LCD_PWR1,  DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_PWR2,  DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_SDIN,  DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_SDOUT, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_WR_N,  DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_CS0_N, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_DC0,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_SCK,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_PWR0,  DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_PCLK,  DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_DE,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_HSYNC, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_VSYNC, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D0,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D1,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D2,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D3,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D4,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D5,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D6,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D7,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D8,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D9,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D10,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D11,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D12,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D13,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D14,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D15,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D16,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D17,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D18,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D19,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D20,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D21,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D22,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D23,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_CS1_N, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_M1,    DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_DC1,   DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CRT_HSYNC, CRT,   NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(CRT_VSYNC, CRT,   NORMAL, NORMAL, OUTPUT),
+
+	/* BT656 */
+	LV_PINMUX(VI_MCLK,  VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_PCLK,  VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_HSYNC, VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_VSYNC, VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D2,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D3,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D4,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D5,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D6,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D7,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D8,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D9,    VI,    NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D11,   RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+	/* GPIOs */
+	DEFAULT_PINMUX(GPIO_PU5, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_AD12, RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* LCD BL */
+	DEFAULT_PINMUX(GMI_AD8,  PWM0,  NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD10, RSVD4, NORMAL, NORMAL, OUTPUT),
+
+	/* SPI4 */
+	DEFAULT_PINMUX(GMI_A16, SPI4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_A17, SPI4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_A18, SPI4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_A19, SPI4, NORMAL, NORMAL, INPUT),
+
+	/* Video input GPIO */
+	DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB7, RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* Sensor GPIO */
+	DEFAULT_PINMUX(GPIO_PCC2, RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* JTAG */
+	DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT),
+
+	/* Power controls */
+	DEFAULT_PINMUX(GMI_CS2_N, RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* SPI1 */
+	DEFAULT_PINMUX(SPI1_MOSI,  SPI1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPI1_SCK,   SPI1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPI1_MISO,  SPI1, NORMAL, NORMAL, INPUT),
+
+	/* PMU */
+	DEFAULT_PINMUX(GPIO_PV0,    RSVD1,  UP,     NORMAL, INPUT),
+	DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(CLK_32K_IN,  SYSCLK, NORMAL, NORMAL, INPUT),
+
+	/* PCI */
+	DEFAULT_PINMUX(PEX_L0_PRSNT_N,  PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L0_RST_N,    PCIE, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(PEX_L0_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_WAKE_N,      PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L1_PRSNT_N,  PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L1_RST_N,    PCIE, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(PEX_L1_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L2_PRSNT_N,  PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L2_RST_N,    PCIE, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(PEX_L2_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+
+	/* HDMI */
+	DEFAULT_PINMUX(HDMI_CEC, CEC,   NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT),
+};
+
+static struct pingroup_config unused_pins_lowpower[] = {
+	/* UART1 - NC */
+	DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA3, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, INPUT),
+
+	/* UART2 - NC */
+	DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT),
+
+	/* DAP - NC */
+	DEFAULT_PINMUX(CLK1_REQ,  RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CLK3_OUT,  RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CLK3_REQ,  RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* DAP4 - NC */
+	DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
+
+	/* Tamonten GPIO - NC */
+	DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CLK2_REQ, DAP,        NORMAL, NORMAL, INPUT),
+
+	/* BT656 - NC */
+	LV_PINMUX(VI_D0,  RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D1,  RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D10, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+	/* GPIO - NC */
+	DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PU4, RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* Video input - NC */
+	DEFAULT_PINMUX(CAM_MCLK,  RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB3, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB5, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB6, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW11,  RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* KBC keys - NC */
+	DEFAULT_PINMUX(KB_ROW0,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW1,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW2,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW3,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW4,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW5,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW6,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW7,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW8,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW9,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW12, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW13, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW14, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW15, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL0,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL1,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL2,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL3,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL4,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL5,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL6,  KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL7,  KBC, UP, NORMAL, INPUT),
+
+	/* PMU - NC */
+	DEFAULT_PINMUX(CLK_32K_OUT, RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* Power rails GPIO - NC */
+	DEFAULT_PINMUX(SPI2_SCK,  RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB4, RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* Others - NC */
+	DEFAULT_PINMUX(GMI_WP_N,   RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PV1,   RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_WAIT,   NAND, UP,     TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_ADV_N,  NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_CLK,    NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_CS3_N,  NAND, NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(GMI_CS7_N,  NAND, UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(GMI_AD0,    NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD1,    NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD2,    NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD3,    NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD4,    NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD5,    NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD6,    NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD7,    NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD9,    PWM1, NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(GMI_AD11,   NAND, NORMAL, NORMAL,   OUTPUT),
+	DEFAULT_PINMUX(GMI_AD13,   NAND, UP,     NORMAL,   INPUT),
+	DEFAULT_PINMUX(GMI_WR_N,   NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_OE_N,   NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_DQS,    NAND, NORMAL, TRISTATE, OUTPUT),
+};
+
+static struct padctrl_config tamonten_ng_padctrl[] = {
+	/* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+	DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR,
+		SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE),
+};
+#endif	/* _PINMUX_CONFIG_TAMONTEN_NG_H_ */
diff --git a/board/avionic-design/common/tamonten-ng.c b/board/avionic-design/common/tamonten-ng.c
new file mode 100644
index 0000000..7a17839
--- /dev/null
+++ b/board/avionic-design/common/tamonten-ng.c
@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
+#include "pinmux-config-tamonten-ng.h"
+#include <i2c.h>
+
+#define PMU_I2C_ADDRESS		0x2D
+#define MAX_I2C_RETRY		3
+
+#define PMU_REG_LDO1		0x30
+#define PMU_REG_LDO2		0x31
+#define PMU_REG_LDO5		0x32
+#define PMU_REG_LDO8		0x33
+#define PMU_REG_LDO7		0x34
+#define PMU_REG_LDO6		0x35
+#define PMU_REG_LDO4		0x36
+#define PMU_REG_LDO3		0x37
+
+#define PMU_REG_LDO_OFF		0
+#define PMU_REG_LDO_HIGH_POWER	1
+#define PMU_REG_LDO_LOW_POWER	3
+
+/* Voltage selection for the LDOs with 50mV resolution */
+#define PMU_REG_LDO_SEL_50(mV)	((((mV - 1000) / 50) + 4) << 2)
+/* Voltage selection for the LDOs with 100mV resolution */
+#define PMU_REG_LDO_SEL_100(mV)	((((mV - 1000) / 100) + 2) << 2)
+
+#define PMU_REG_LDO_50(st, mV)	(PMU_REG_LDO_##st | PMU_REG_LDO_SEL_50(mV))
+#define PMU_REG_LDO_100(st, mV)	(PMU_REG_LDO_##st | PMU_REG_LDO_SEL_50(mV))
+
+#define PMU_LDO1(st, mV)	PMU_REG_LDO_50(st, mV)
+#define PMU_LDO2(st, mV)	PMU_REG_LDO_50(st, mV)
+#define PMU_LDO5(st, mV)	PMU_REG_LDO_100(st, mV)
+#define PMU_LDO8(st, mV)	PMU_REG_LDO_100(st, mV)
+#define PMU_LDO7(st, mV)	PMU_REG_LDO_100(st, mV)
+#define PMU_LDO6(st, mV)	PMU_REG_LDO_100(st, mV)
+#define PMU_LDO4(st, mV)	PMU_REG_LDO_50(st, mV)
+#define PMU_LDO3(st, mV)	PMU_REG_LDO_100(st, mV)
+
+void pinmux_init(void)
+{
+	pinmux_config_table(tamonten_ng_pinmux_common,
+			    ARRAY_SIZE(tamonten_ng_pinmux_common));
+	pinmux_config_table(unused_pins_lowpower,
+			    ARRAY_SIZE(unused_pins_lowpower));
+
+	/* Initialize any non-default pad configs (APB_MISC_GP regs) */
+	padgrp_config_table(tamonten_ng_padctrl,
+			    ARRAY_SIZE(tamonten_ng_padctrl));
+}
+
+
+void pmu_write(uchar reg, uchar data)
+{
+	int i;
+	i2c_set_bus_num(0);	/* PMU is on bus 0 */
+	for (i = 0; i < MAX_I2C_RETRY; ++i) {
+		if (i2c_write(PMU_I2C_ADDRESS, reg, 1, &data, 1))
+			udelay(100);
+		else
+			break;
+	}
+}
+
+void power_init_board(void)
+{
+	/* Set the periphs in reset */
+	gpio_request(GPIO_PI4, "nRST_PERIPH");
+	gpio_direction_output(GPIO_PI4, 0);
+
+	/* Disable the PCIe power */
+	gpio_request(GPIO_PT3, "EN_3V3_PEX_HVDD");
+	gpio_direction_output(GPIO_PT3, 0);
+
+	/* Disable the SATA power */
+	gpio_request(GPIO_PK3, "EN_3V3_SATA_HVDD");
+	gpio_direction_output(GPIO_PK3, 0);
+
+	/* Disable LDO1 for PCIe and SATA */
+	pmu_write(PMU_REG_LDO1, PMU_LDO1(OFF, 1050));
+
+	/* Turn on the alive signal */
+	gpio_request(GPIO_PV2, "ALIVE");
+	gpio_direction_output(GPIO_PV2, 1);
+
+	/* Wait for the periph to finish their reset */
+	udelay(1000);
+	gpio_direction_output(GPIO_PI4, 1);
+}
+
+#if defined(CONFIG_TEGRA_MMC)
+/*
+ * Do I2C/PMU writes to bring up SD card bus power
+ *
+ */
+void board_sdmmc_voltage_init(void)
+{
+	/* Enable LDO5 with 3.3v for SDMMC3 */
+	pmu_write(PMU_REG_LDO5, PMU_LDO5(HIGH_POWER, 3300));
+
+	/* Switch the power on */
+	gpio_request(GPIO_PJ2, "EN_3V3_EMMC");
+	gpio_direction_output(GPIO_PJ2, 1);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+	/*
+	 * NOTE: We don't do mmc-specific pin muxes here.
+	 * They were done globally in pinmux_init().
+	 */
+
+	/* Bring up the SDIO1 power rail */
+	board_sdmmc_voltage_init();
+}
+#endif	/* MMC */
diff --git a/board/avionic-design/dts/tegra30-tamonten.dtsi b/board/avionic-design/dts/tegra30-tamonten.dtsi
new file mode 100644
index 0000000..d80b177
--- /dev/null
+++ b/board/avionic-design/dts/tegra30-tamonten.dtsi
@@ -0,0 +1,74 @@
+#include "tegra30.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten NG";
+	compatible = "ad,tamonten-ng", "nvidia,tegra30";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	aliases {
+		i2c0 = "/i2c at 7000d000";
+		i2c1 = "/i2c at 7000c000";
+		i2c2 = "/i2c at 7000c400";
+		i2c3 = "/i2c at 7000c500";
+		i2c4 = "/i2c at 7000c700";
+		sdhci0 = "/sdhci at 78000600";
+		sdhci1 = "/sdhci at 78000400";
+		sdhci2 = "/sdhci at 78000000";
+		usb0 = "/usb at 7d008000";
+	};
+
+	i2c at 7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c at 7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c at 7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c at 7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c at 7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	spi at 7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	sdhci at 78000000 {
+		status = "okay";
+		bus-width = <4>;
+	};
+
+	sdhci at 78000400 {
+		status = "okay";
+		cd-gpios = <&gpio 69 1>; /* gpio PI5 */
+		wp-gpios = <&gpio 67 0>; /* gpio PI3 */
+		bus-width = <4>;
+	};
+
+	sdhci at 78000600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	usb at 7d008000 {
+		status = "okay";
+	};
+
+};
diff --git a/board/avionic-design/dts/tegra30-tec-ng.dts b/board/avionic-design/dts/tegra30-tec-ng.dts
new file mode 100644
index 0000000..244b99d
--- /dev/null
+++ b/board/avionic-design/dts/tegra30-tec-ng.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "tegra30-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten™ NG Evaluation Carrier";
+	compatible = "ad,tec-ng", "nvidia,tegra30";
+};
diff --git a/board/avionic-design/tec-ng/Makefile b/board/avionic-design/tec-ng/Makefile
new file mode 100644
index 0000000..22e19e0
--- /dev/null
+++ b/board/avionic-design/tec-ng/Makefile
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2013
+# Avionic Design GmbH <www.avionic-design.de>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= ../common/tamonten-ng.o
+
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/boards.cfg b/boards.cfg
index be810c7..ff8fa0c 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -374,6 +374,7 @@ jornada                      arm         sa1100
 plutux                       arm         armv7:arm720t plutux            avionic-design tegra20
 medcom-wide                  arm         armv7:arm720t medcom-wide       avionic-design tegra20
 tec                          arm         armv7:arm720t tec               avionic-design tegra20
+tec-ng                       arm         armv7:arm720t tec-ng            avionic-design tegra30
 paz00                        arm         armv7:arm720t paz00             compal         tegra20
 trimslice                    arm         armv7:arm720t trimslice         compulab       tegra20
 atngw100                     avr32       at32ap      -                   atmel          at32ap700x
diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h
new file mode 100644
index 0000000..13baa76
--- /dev/null
+++ b/include/configs/tec-ng.h
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2013
+ * Avionic Design GmbH <www.avionic-design.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra30-common.h"
+
+/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra30-tec-ng
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT			"Tegra30 (TEC-NG) # "
+#define CONFIG_TEGRA_BOARD_STRING	"Avionic Design Tamonten™ NG Evaluation Carrier"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTD
+#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_SYS_MMC_ENV_PART		2
+
+/* SPI */
+#define CONFIG_TEGRA20_SLINK
+#define CONFIG_TEGRA_SLINK_CTRLS       6
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED        24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE          (4 << 20)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+/* Tag support */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+/* support the new (FDT-based) image format */
+#define CONFIG_FIT
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
-- 
1.8.4



More information about the U-Boot mailing list